lkml.org 
[lkml]   [2020]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 4/4] bus: mhi: clients: Add user space client interface driver
On Mon, Jul 20, 2020 at 08:40:24PM -0700, Hemant Kumar wrote:
> Hi Mani,
>
> On 6/19/20 3:40 AM, Manivannan Sadhasivam wrote:
> > On Thu, Jun 11, 2020 at 11:13:44AM -0700, Hemant Kumar wrote:
> > > This MHI client driver allows user space clients to transfer
> > > data between MHI device and host using standard file operations.
> >
> > I think we need to explicitly specify 'raw' data here. Because we have different
> > APIs for queuing different types of data. So saying just data sounds vague
> > unless this driver can handle multiple types of data which I don't think can
> > happen.
> >
> > And you need to update the same in docs.
> Done.
> >
> > > Device file node is created with format
> > >
> > > /dev/mhi_<controller_name>_<mhi_device_name>
> > >
> > > Currently it supports loopback client.
> > >
> > > Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
> > > ---
> > > drivers/bus/mhi/Kconfig | 2 +
> > > drivers/bus/mhi/Makefile | 1 +
> > > drivers/bus/mhi/clients/Kconfig | 16 +
> > > drivers/bus/mhi/clients/Makefile | 3 +
> > > drivers/bus/mhi/clients/uci.c | 652 +++++++++++++++++++++++++++++++++++++++
> > > 5 files changed, 674 insertions(+)
> > > create mode 100644 drivers/bus/mhi/clients/Kconfig
> > > create mode 100644 drivers/bus/mhi/clients/Makefile
> > > create mode 100644 drivers/bus/mhi/clients/uci.c
> > >
> > > diff --git a/drivers/bus/mhi/Kconfig b/drivers/bus/mhi/Kconfig
> > > index 6a217ff..f224be8 100644
> > > --- a/drivers/bus/mhi/Kconfig
> > > +++ b/drivers/bus/mhi/Kconfig
> > > @@ -20,3 +20,5 @@ config MHI_BUS_DEBUG
> > > Enable debugfs support for use with the MHI transport. Allows
> > > reading and/or modifying some values within the MHI controller
> > > for debug and test purposes.
> >
> > Hmm, so this patchset depends on debugfs patches? You need to mention this in
> > cover letter. Or even better, just make it independent
> Driver does not depend on debugfs. i need to fix that.
>
> >
> > > +
> > > +source "drivers/bus/mhi/clients/Kconfig"
> > > diff --git a/drivers/bus/mhi/Makefile b/drivers/bus/mhi/Makefile
> > > index 19e6443..48f6028 100644
> > > --- a/drivers/bus/mhi/Makefile
> > > +++ b/drivers/bus/mhi/Makefile
> > > @@ -1,2 +1,3 @@
> > > # core layer
> > > obj-y += core/
> > > +obj-y += clients/
> > > diff --git a/drivers/bus/mhi/clients/Kconfig b/drivers/bus/mhi/clients/Kconfig
> > > new file mode 100644
> > > index 0000000..cd84419
> > > --- /dev/null
> > > +++ b/drivers/bus/mhi/clients/Kconfig
> > > @@ -0,0 +1,16 @@
> > > +# SPDX-License-Identifier: GPL-2.0-only
> > > +
> > > +menu "MHI clients support"
> > > + depends on MHI_BUS
> >
> > I don't think we need MHI_BUS dependency here.
> Reason i added was, if MHI BUS is not enabled "MHI clients support" would
> not show up in the menu.

We can optimize this as below:

config MHI_BUS
...

if MHI_BUS

source "drivers/bus/mhi/clients/Kconfig"

endif

Then we don't need to explicitly specify MHI_BUS dependency in sub-directories.

> >
> > > +
> > > +config MHI_UCI
> > > + tristate "MHI UCI"
> > > + depends on MHI_BUS
> > > + help
> > > + MHI based userspace client interface driver is for transferring
> >
> > s/is for/used for/g. Also provide indent for help text.
> Done.
> >
> > > + data between host and device using standard file operations from
> > > + user space. Open, read, write, and close operations are supported
> >
> > Please use 'userspace' everywhere.
> Done.
> >
> > > + by this driver. Please check mhi_uci_match_table for all supported
> > > + channels that are exposed to userspace.
> > > +
> > > +endmenu
> > > diff --git a/drivers/bus/mhi/clients/Makefile b/drivers/bus/mhi/clients/Makefile
> > > new file mode 100644
> > > index 0000000..dd2930c
> > > --- /dev/null
> > > +++ b/drivers/bus/mhi/clients/Makefile
> > > @@ -0,0 +1,3 @@
> > > +# SPDX-License-Identifier: GPL-2.0-only
> > > +
> > > +obj-$(CONFIG_MHI_UCI) +=uci.o
> >
> > space after '+='
> Done.
> >
> > > diff --git a/drivers/bus/mhi/clients/uci.c b/drivers/bus/mhi/clients/uci.c
> > > new file mode 100644
> > > index 0000000..8f36fb0
> > > --- /dev/null
> > > +++ b/drivers/bus/mhi/clients/uci.c
> > > @@ -0,0 +1,652 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/* Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.*/
> > > +
> > > +#include <linux/kernel.h>
> > > +#include <linux/mod_devicetable.h>
> > > +#include <linux/module.h>
> > > +#include <linux/mhi.h>
> >
> > Please sort includes alphabetically.
> you mean like this
> #include <linux/kernel.h>
> #include <linux/mhi.h>
> #include <linux/mod_devicetable.h>
> #include <linux/module.h>
>

#include <linux/module.h>
#include <linux/mod_devicetable.h>

> >
> > > +#include <linux/poll.h>
> > > +
> > > +#define DEVICE_NAME "mhi"
> > > +#define MHI_UCI_DRIVER_NAME "mhi_uci"
> > > +#define MAX_UCI_DEVICES (64)
> > > +
> >
> > How about the kdoc comments for all fields and structures used?
> Done.
> >
> > > +struct uci_chan {
> > > + wait_queue_head_t wq;
> > > +
> > > + /* locks ul/dl uci device channel */
> > > + spinlock_t lock;
> >
> > It seems like you are trying to protect a field (enabled) in parent structure
> > (uci_dev) using this lock. This sounds weird. Why can't you just use the mutex
> > present in that?
> i agree, let me fix locking in the entire driver.
> >
> > > +
> > > + /* user space waiting to read */
> >
> > The comments should clearly portray what the field is for.
> list of pending read buffers ?

okay

> >
> > > + struct list_head pending;
> > > +
> > > + /* current buffer user space reading */
> >
> > This sentence is not correct.
> current buffer user space is reading ?

Just say, "Buffer for holding the data from device"

> >
> > > + struct uci_buf *cur_buf;
> > > + size_t rx_size;
> > > +};
> > > +
> > > +struct uci_buf {
> > > + void *data;
> > > + size_t len;
> > > + struct list_head node;
> > > +};
> > > +
> > > +struct mhi_uci_drv {
> > > + struct list_head head;
> > > +
> > > + /* uci driver lock to sync open, probe and remove */
> > > + struct mutex lock;
> > > + struct class *class;
> > > + int major;
> > > + dev_t dev_t;
> >
> > devt?
> will rename it to devt
> >
> > > +};
> > > +
> > > +struct uci_dev {
> > > + struct list_head node;
> > > + dev_t devt;
> > > + struct device *dev;
> > > + struct mhi_device *mhi_dev;
> > > + const char *chan;
> > > +
> > > + /* sync open and close */
> >
> > Again, please use descriptive comments. Need not be multi lines but something
> > which could be understood easily.
> Done.
> >
> > > + struct mutex mutex;
> > > + struct uci_chan ul_chan;
> > > + struct uci_chan dl_chan;
> > > + size_t mtu;
> > > +
> > > + /* maximum size of incoming buffer */
> > > + size_t actual_mtu;
> > > + int ref_count;
> > > + bool enabled;
> > > +};
> > > +
> > > +static DECLARE_BITMAP(uci_minors, MAX_UCI_DEVICES);
> > > +static struct mhi_uci_drv mhi_uci_drv;
> >
> > Please use object names different from datatype names everywhere.
> Done.
> >
> > > +
> > > +static int mhi_queue_inbound(struct uci_dev *uci_dev)
> > > +{
> > > + struct mhi_device *mhi_dev = uci_dev->mhi_dev;
> > > + struct device *dev = &mhi_dev->dev;
> > > + int nr_trbs = mhi_get_no_free_descriptors(mhi_dev, DMA_FROM_DEVICE);
> >
> > I'd prefer to have this assignment in definition block.
> Done.
> >
> > > + size_t mtu = uci_dev->mtu;
> > > + size_t actual_mtu = uci_dev->actual_mtu;
> > > + void *buf;
> > > + struct uci_buf *uci_buf;
> > > + int ret = -EIO, i;
> > > +
> > > + for (i = 0; i < nr_trbs; i++) {
> > > + buf = kmalloc(mtu, GFP_KERNEL);
> > > + if (!buf)
> > > + return -ENOMEM;
> > > +
> > > + uci_buf = buf + actual_mtu;
> >
> > Aren't you segfaulting here?
> no, in probe we do this
> uci_dev->actual_mtu = uci_dev->mtu - sizeof(struct uci_buf);
> and save meta data uci_buf data ptr and len. it is done in mhi_dl_xfer_cb()
> function and used in read().

Ah.. I misread this. I thought you're adding actual_mtu to buf. Sorry for the
noise.

> >
> > > + uci_buf->data = buf;
> >
> > Where is this uci_buf getting used?
> >
> > > +
> > > + dev_dbg(dev, "Allocated buf %d of %d size %ld\n", i, nr_trbs,
> > > + actual_mtu);
> > > +
> > > + ret = mhi_queue_buf(mhi_dev, DMA_FROM_DEVICE, buf, actual_mtu,
> > > + MHI_EOT);
> > > + if (ret) {
> > > + kfree(buf);
> > > + dev_err(dev, "Failed to queue buffer %d\n", i);
> >
> > Failed to queue buffer: %d
> >
> > > + return ret;
> > > + }
> >
> > So is this buffer getting freed anywhere?
> in mhi_uci_release().
> >

You're not assigning uci_buf here. Then how it will get freed? Moreover I don't
see any reason to allocate uci_buf in this function.

> > > + }
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static int mhi_uci_release(struct inode *inode, struct file *file)
> > > +{
> > > + struct uci_dev *uci_dev = file->private_data;
> > > +
> > > + mutex_lock(&uci_dev->mutex);
> > > + uci_dev->ref_count--;
> > > + if (!uci_dev->ref_count) {
> > > + struct uci_buf *itr, *tmp;
> > > + struct uci_chan *uci_chan;
> > > +
> > > + if (uci_dev->enabled)
> > > + mhi_unprepare_from_transfer(uci_dev->mhi_dev);
> > > +
> > > + /* clean inbound channel */
> > > + uci_chan = &uci_dev->dl_chan;
> > > + list_for_each_entry_safe(itr, tmp, &uci_chan->pending, node) {
> > > + list_del(&itr->node);
> > > + kfree(itr->data);
> > > + }
> >
> > Add a new line after '}' and before next line of code.
> Done.
> >
> > > + if (uci_chan->cur_buf)
> > > + kfree(uci_chan->cur_buf->data);
> > > +
> > > + uci_chan->cur_buf = NULL;
> > > +
> > > + if (!uci_dev->enabled) {
> > > + mutex_unlock(&uci_dev->mutex);
> > > + mutex_destroy(&uci_dev->mutex);
> > > + clear_bit(MINOR(uci_dev->devt), uci_minors);
> > > + kfree(uci_dev);
> >
> > Hmm. So you are freeing uci_dev here and also trying to do the same in
> > mhi_uci_remove.
> yes that is based on ref count, so no double free. do you see any issue with
> that ?

You are decreasing the refcount here and freeing uci_dev if refcount is 0. Then
in mhi_uci_remove() you're again checking if the refcount is 0 and then trying
to release uci_dev. Am I missing something?

Since you're allocating uci_dev in probe(), you should only free it in remove().

> >
> > > + return 0;
> > > + }
> > > + }
> > > +
> > > + mutex_unlock(&uci_dev->mutex);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static __poll_t mhi_uci_poll(struct file *file, poll_table *wait)
> > > +{
> > > + struct uci_dev *uci_dev = file->private_data;
> > > + struct mhi_device *mhi_dev = uci_dev->mhi_dev;
> > > + struct device *dev = &mhi_dev->dev;
> > > + struct uci_chan *uci_chan;
> > > + __poll_t mask = 0;
> > > +
> > > + poll_wait(file, &uci_dev->dl_chan.wq, wait);
> > > + poll_wait(file, &uci_dev->ul_chan.wq, wait);
> > > +
> > > + uci_chan = &uci_dev->dl_chan;
> > > + spin_lock_bh(&uci_chan->lock);
> >
> > This is what looks wrong to me.
> >
> > > + if (!uci_dev->enabled) {
> >
> > So you are removing the char dev node even if there are users in the system.
> > Why do you want to do so?
> Removing char dev node is done when MHI device is removed. It is possible
> that user space entity would exist but MHI device is removed
> due to underlying transport disconnect. i dont see a way to prevent
> this or i am missing your point. Can you pls elaborate your concern.

I didn't closely look where the device is getting created. Please ignore my
comment...

> >
> > > + mask = EPOLLERR;
> > > + } else {
> > > + if (!list_empty(&uci_chan->pending) || uci_chan->cur_buf) {
> > > + dev_dbg(dev, "Client can read from node\n");
> > > + mask |= EPOLLIN | EPOLLRDNORM;
> > > + }
> > > + }
> > > + spin_unlock_bh(&uci_chan->lock);
> > > +
> > > + uci_chan = &uci_dev->ul_chan;
> > > + spin_lock_bh(&uci_chan->lock);
> > > + if (!uci_dev->enabled) {
> > > + mask |= EPOLLERR;
> > > + } else if (mhi_get_no_free_descriptors(mhi_dev, DMA_TO_DEVICE) > 0) {
> > > + dev_dbg(dev, "Client can write to node\n");
> > > + mask |= EPOLLOUT | EPOLLWRNORM;
> > > + }
> > > + spin_unlock_bh(&uci_chan->lock);
> > > +
> > > + dev_dbg(dev, "Client attempted to poll, returning mask 0x%x\n", mask);
> > > +
> > > + return mask;
> > > +}
> > > +
> > > +static ssize_t mhi_uci_write(struct file *file,
> > > + const char __user *buf,
> > > + size_t count,
> > > + loff_t *offp)
> > > +{
> > > + struct uci_dev *uci_dev = file->private_data;
> > > + struct mhi_device *mhi_dev = uci_dev->mhi_dev;
> > > + struct device *dev = &mhi_dev->dev;
> > > + struct uci_chan *uci_chan = &uci_dev->ul_chan;
> > > + size_t bytes_xfered = 0;
> > > + int ret, nr_avail;
> > > +
> > > + if (!buf || !count)
> > > + return -EINVAL;
> > > +
> > > + /* confirm channel is active */
> > > + spin_lock_bh(&uci_chan->lock);
> > > + if (!uci_dev->enabled) {
> > > + spin_unlock_bh(&uci_chan->lock);
> > > + return -ERESTARTSYS;
> >
> > You should return -ENODEV here.
> Done.
> >
> > > + }
> > > +
> > > + dev_dbg(dev, "Enter: to xfer:%lu bytes\n", count);
> > > +
> >
> > Please avoid "Enter" debug prints.
> Done, will keep the byte count print?
> >
> > > + while (count) {
> > > + size_t xfer_size;
> > > + void *kbuf;
> > > + enum mhi_flags flags;
> > > +
> > > + spin_unlock_bh(&uci_chan->lock);
> >
> > Why do you want to hold the lock till here?
> Will come up with better locking in next patch set
> >
> > > +
> > > + /* wait for free descriptors */
> > > + ret = wait_event_interruptible(uci_chan->wq,
> > > + (!uci_dev->enabled) ||
> > > + (nr_avail = mhi_get_no_free_descriptors(mhi_dev,
> > > + DMA_TO_DEVICE)) > 0);
> >
> > Does using "wait_event_interruptible_timeout" makes sense here?
> No, read needs to be blocked until data comes. user space would call read()
> and wait for data to arrive. There is no definite time when data would
> arrive.

Hmm, I thought we could timeout at some point. But that's fine.

> >
> > > +
> > > + if (ret == -ERESTARTSYS || !uci_dev->enabled) {
> > > + dev_dbg(dev, "Exit signal caught for node or not enabled\n");
> > > + return -ERESTARTSYS;
> >
> > You need to return -ENODEV for !uci_dev->enabled case.
> Done.
> >
> > > + }
> > > +
> > > + xfer_size = min_t(size_t, count, uci_dev->mtu);
> > > + kbuf = kmalloc(xfer_size, GFP_KERNEL);
> > > + if (!kbuf)
> > > + return -ENOMEM;
> > > +
> > > + ret = copy_from_user(kbuf, buf, xfer_size);
> > > + if (unlikely(ret)) {
> > > + kfree(kbuf);
> > > + return ret;
> > > + }
> > > +
> > > + spin_lock_bh(&uci_chan->lock);
> > > +
> > > + /* if ring is full after this force EOT */
> > > + if (nr_avail > 1 && (count - xfer_size))
> > > + flags = MHI_CHAIN;
> > > + else
> > > + flags = MHI_EOT;
> > > +
> > > + if (uci_dev->enabled)
> > > + ret = mhi_queue_buf(mhi_dev, DMA_TO_DEVICE, kbuf,
> > > + xfer_size, flags);
> > > + else
> > > + ret = -ERESTARTSYS;
> >
> > Again, please fix this all over the driver.
> Done.
> >
> > > +
> > > + if (ret) {
> > > + kfree(kbuf);
> > > + goto sys_interrupt;
> > > + }
> > > +
> > > + bytes_xfered += xfer_size;
> > > + count -= xfer_size;
> > > + buf += xfer_size;
> > > + }
> > > +
> > > + spin_unlock_bh(&uci_chan->lock);
> > > + dev_dbg(dev, "Exit: Number of bytes xferred:%lu\n", bytes_xfered);
> >
> > Drop the "Exit" too.
> how about keeping the number of bytes xferred and remove exit from the msg ?
> helps in debugging user space entity vs kernel space mhi uci driver issues.
> >

Yep, just remove 'Exit'.

> > > +
> > > + return bytes_xfered;
> > > +
> > > +sys_interrupt:
> > > + spin_unlock_bh(&uci_chan->lock);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static ssize_t mhi_uci_read(struct file *file,
> > > + char __user *buf,
> > > + size_t count,
> > > + loff_t *ppos)
> > > +{
> > > + struct uci_dev *uci_dev = file->private_data;
> > > + struct mhi_device *mhi_dev = uci_dev->mhi_dev;
> > > + struct uci_chan *uci_chan = &uci_dev->dl_chan;
> > > + struct device *dev = &mhi_dev->dev;
> > > + struct uci_buf *uci_buf;
> > > + char *ptr;
> > > + size_t to_copy;
> > > + int ret = 0;
> > > +
> > > + if (!buf)
> > > + return -EINVAL;
> > > +
> > > + dev_dbg(dev, "Client provided buf len:%lu\n", count);
> >
> > Drop this.
> This would help if client provided buffer is smaller than the received rx
> data. Even though this function would only copy the mount of buffer
> provided by user space but we can track that condition.
> >

The userspace will know how much buffer allocated, so no need to say it here.

> > > +
> > > + mutex_lock(&uci_dev->mutex);
> > > + /* confirm channel is active */
> > > + spin_lock_bh(&uci_chan->lock);
> > > + if (!uci_dev->enabled) {
> > > + spin_unlock_bh(&uci_chan->lock);
> > > + mutex_unlock(&uci_dev->mutex);
> > > + return -ERESTARTSYS;
> > > + }
> > > +
> > > + /* No data available to read, wait */
> > > + if (!uci_chan->cur_buf && list_empty(&uci_chan->pending)) {
> > > + dev_dbg(dev, "No data available to read waiting\n");
> > > +
> > > + spin_unlock_bh(&uci_chan->lock);
> > > + mutex_unlock(&uci_dev->mutex);
> > > + ret = wait_event_interruptible(uci_chan->wq,
> > > + (!uci_dev->enabled ||
> > > + !list_empty(&uci_chan->pending)));
> > > + if (ret == -ERESTARTSYS) {
> > > + dev_dbg(dev, "Exit signal caught for node\n");
> >
> > No need of this.
> This is same as what we are doing in write(). I can add the uci_dev->enabled
> check here as well and return -ENODEV as you commented for write(). Helps in
> debugging.

Okay

> >
> > > + return -ERESTARTSYS;
> > > + }
> > > +
> > > + mutex_lock(&uci_dev->mutex);
> > > + spin_lock_bh(&uci_chan->lock);
> > > + if (!uci_dev->enabled) {
> > > + dev_dbg(dev, "node is disabled\n");
> >
> > Okay, this is what I'm concerned about.
> If your concern is about locking, i am going to come up with the change to
> fix that. If you concern is about node getting removed while read is issued
> then i dont see how we can prevent that.
> >
> > > + ret = -ERESTARTSYS;
> > > + goto read_error;
> > > + }
> > > + }
> > > +
> > > + /* new read, get the next descriptor from the list */
> > > + if (!uci_chan->cur_buf) {
> > > + uci_buf = list_first_entry_or_null(&uci_chan->pending,
> > > + struct uci_buf, node);
> > > + if (unlikely(!uci_buf)) {
> > > + ret = -EIO;
> > > + goto read_error;
> > > + }
> > > +
> > > + list_del(&uci_buf->node);
> > > + uci_chan->cur_buf = uci_buf;
> > > + uci_chan->rx_size = uci_buf->len;
> > > + dev_dbg(dev, "Got pkt of size:%zu\n", uci_chan->rx_size);
> > > + }
> > > +
> > > + uci_buf = uci_chan->cur_buf;
> > > +
> > > + /* Copy the buffer to user space */
> > > + to_copy = min_t(size_t, count, uci_chan->rx_size);
> > > + ptr = uci_buf->data + (uci_buf->len - uci_chan->rx_size);
> > > + spin_unlock_bh(&uci_chan->lock);
> > > +
> > > + ret = copy_to_user(buf, ptr, to_copy);
> > > + if (ret)
> > > + goto err_unlock_mtx;
> > > +
> > > + spin_lock_bh(&uci_chan->lock);
> > > +
> > > + dev_dbg(dev, "Copied %lu of %lu bytes\n", to_copy, uci_chan->rx_size);
> > > + uci_chan->rx_size -= to_copy;
> > > +
> > > + /* we finished with this buffer, queue it back to hardware */
> >
> > Oh wait... what is happening here? Why do you want to do tx?
> we are not doing any TX, we are just queuing the rx buffer back to get more
> data.

But why? You are doing this unconditionally!

> >
> > > + if (!uci_chan->rx_size) {
> > > + uci_chan->cur_buf = NULL;
> > > +
> > > + if (uci_dev->enabled)
> > > + ret = mhi_queue_buf(mhi_dev, DMA_FROM_DEVICE,
> > > + uci_buf->data,
> > > + uci_dev->actual_mtu, MHI_EOT);
> > > + else
> > > + ret = -ERESTARTSYS;
> > > +
> > > + if (ret) {
> > > + dev_err(dev, "Failed to recycle element\n");
> > > + kfree(uci_buf->data);
> > > + goto read_error;
> > > + }
> > > + }
> > > + spin_unlock_bh(&uci_chan->lock);
> > > + mutex_unlock(&uci_dev->mutex);
> > > +
> > > + dev_dbg(dev, "Returning %lu bytes\n", to_copy);
> > > +
> > > + return to_copy;
> > > +
> > > +read_error:
> > > + spin_unlock_bh(&uci_chan->lock);
> > > +err_unlock_mtx:
> > > + mutex_unlock(&uci_dev->mutex);
> > > + return ret;
> > > +}
> > > +
> > > +static int mhi_uci_open(struct inode *inode, struct file *filp)
> > > +{
> > > + struct uci_dev *uci_dev = NULL, *tmp_dev;
> > > + int ret = -EIO;
> > > + struct uci_buf *buf_itr, *tmp;
> > > + struct uci_chan *dl_chan;
> > > + struct mhi_device *mhi_dev;
> > > + struct device *dev;
> > > +
> > > + mutex_lock(&mhi_uci_drv.lock);
> > > + list_for_each_entry(tmp_dev, &mhi_uci_drv.head, node) {
> > > + if (tmp_dev->devt == inode->i_rdev) {
> > > + uci_dev = tmp_dev;
> > > + break;
> > > + }
> > > + }
> > > +
> > > + /* could not find a minor node */
> > > + if (!uci_dev)
> > > + goto error_exit;
> > > +
> > > + mhi_dev = uci_dev->mhi_dev;
> > > + dev = &mhi_dev->dev;
> > > +
> > > + mutex_lock(&uci_dev->mutex);
> > > + if (!uci_dev->enabled) {
> > > + dev_info(dev, "Node exist, but not in active state!\n");
> >
> > Dangling node, right.
> In case remove() is in progress and enabled is set to false but
> destroy_device is not called yet. It covers that case and open() is called
> by user space entity.

Hmm, okay.

> >
> > > + goto error_open_chan;
> > > + }
> > > +
> > > + uci_dev->ref_count++;
> > > +
> > > + dev_dbg(dev, "Node open, ref counts %u\n", uci_dev->ref_count);
> > > +
> > > + if (uci_dev->ref_count == 1) {
> > > + dev_dbg(dev, "Starting channel\n");
> > > + ret = mhi_prepare_for_transfer(uci_dev->mhi_dev);
> > > + if (ret) {
> > > + dev_err(dev, "Error starting transfer channels\n");
> > > + uci_dev->ref_count--;
> > > + goto error_open_chan;
> > > + }
> > > +
> > > + ret = mhi_queue_inbound(uci_dev);
> > > + if (ret)
> >
> > Decrease refcount?
> done in release. For every open increment the ref count and for every
> release call decrement it, so that when ref count becomes 0 we can free
> memory.

Even if open() fails?

> >
> > > + goto error_rx_queue;
> > > + }
> > > +
> > > + filp->private_data = uci_dev;
> > > + mutex_unlock(&uci_dev->mutex);
> > > + mutex_unlock(&mhi_uci_drv.lock);
> > > +
> > > + return 0;
> > > +
> > > +error_rx_queue:
> > > + dl_chan = &uci_dev->dl_chan;
> > > + mhi_unprepare_from_transfer(uci_dev->mhi_dev);
> > > + list_for_each_entry_safe(buf_itr, tmp, &dl_chan->pending, node) {
> > > + list_del(&buf_itr->node);
> > > + kfree(buf_itr->data);
> > > + }
> > > +
> > > +error_open_chan:
> > > + mutex_unlock(&uci_dev->mutex);
> > > +
> > > +error_exit:
> > > + mutex_unlock(&mhi_uci_drv.lock);
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static const struct file_operations mhidev_fops = {
> > > + .owner = THIS_MODULE,
> > > + .open = mhi_uci_open,
> > > + .release = mhi_uci_release,
> > > + .read = mhi_uci_read,
> > > + .write = mhi_uci_write,
> > > + .poll = mhi_uci_poll,
> > > +};
> > > +
> > > +static void mhi_ul_xfer_cb(struct mhi_device *mhi_dev,
> > > + struct mhi_result *mhi_result)
> > > +{
> > > + struct uci_dev *uci_dev = dev_get_drvdata(&mhi_dev->dev);
> > > + struct uci_chan *uci_chan = &uci_dev->ul_chan;
> > > + struct device *dev = &mhi_dev->dev;
> > > +
> > > + dev_dbg(dev, "status:%d xfer_len:%zu\n", mhi_result->transaction_status,
> >
> > Always leave a space after :
> Done.
> >
> > > + mhi_result->bytes_xferd);
> > > +
> > > + kfree(mhi_result->buf_addr);
> > > + if (!mhi_result->transaction_status)
> > > + wake_up(&uci_chan->wq);
> > > +}
> > > +
> > > +static void mhi_dl_xfer_cb(struct mhi_device *mhi_dev,
> > > + struct mhi_result *mhi_result)
> > > +{
> > > + struct uci_dev *uci_dev = dev_get_drvdata(&mhi_dev->dev);
> > > + struct uci_chan *uci_chan = &uci_dev->dl_chan;
> > > + struct device *dev = &mhi_dev->dev;
> > > + unsigned long flags;
> > > + struct uci_buf *buf;
> > > +
> > > + dev_dbg(dev, "status:%d receive_len:%zu\n",
> > > + mhi_result->transaction_status, mhi_result->bytes_xferd);
> > > +
> > > + if (mhi_result->transaction_status == -ENOTCONN) {
> > > + kfree(mhi_result->buf_addr);
> > > + return;
> > > + }
> > > +
> > > + spin_lock_irqsave(&uci_chan->lock, flags);
> > > + buf = mhi_result->buf_addr + uci_dev->actual_mtu;
> > > + buf->data = mhi_result->buf_addr;
> > > + buf->len = mhi_result->bytes_xferd;
> > > + list_add_tail(&buf->node, &uci_chan->pending);
> > > + spin_unlock_irqrestore(&uci_chan->lock, flags);
> > > +
> > > + wake_up(&uci_chan->wq);
> > > +}
> > > +
> > > +static int mhi_uci_probe(struct mhi_device *mhi_dev,
> > > + const struct mhi_device_id *id)
> > > +{
> > > + struct uci_dev *uci_dev;
> > > + struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
> > > + struct device *dev = &mhi_dev->dev;
> > > + int minor;
> > > + int dir;
> > > +
> > > + uci_dev = kzalloc(sizeof(*uci_dev), GFP_KERNEL);
> > > + if (!uci_dev)
> > > + return -ENOMEM;
> > > +
> > > + mutex_init(&uci_dev->mutex);
> > > + uci_dev->mhi_dev = mhi_dev;
> > > +
> > > + mutex_lock(&uci_dev->mutex);
> > > + mutex_lock(&mhi_uci_drv.lock);
> > > +
> > > + minor = find_first_zero_bit(uci_minors, MAX_UCI_DEVICES);
> > > + if (minor >= MAX_UCI_DEVICES) {
> > > + mutex_unlock(&mhi_uci_drv.lock);
> > > + mutex_unlock(&uci_dev->mutex);
> > > + kfree(uci_dev);
> > > + return -ENOSPC;
> > > + }
> > > +
> >
> > Add a comment regarding what is going on below.
> Done.
> >
> > > + uci_dev->devt = MKDEV(mhi_uci_drv.major, minor);
> > > + uci_dev->dev = device_create(mhi_uci_drv.class, &mhi_dev->dev,
> > > + uci_dev->devt, uci_dev,
> > > + DEVICE_NAME "_%s_%s",
> > > + dev_name(mhi_cntrl->cntrl_dev),
> > > + mhi_dev->name);
> > > + set_bit(minor, uci_minors);
> > > +
> > > + for (dir = 0; dir < 2; dir++) {
> > > + struct uci_chan *uci_chan = (dir) ?
> > > + &uci_dev->ul_chan : &uci_dev->dl_chan;
> > > + spin_lock_init(&uci_chan->lock);
> > > + init_waitqueue_head(&uci_chan->wq);
> > > + INIT_LIST_HEAD(&uci_chan->pending);
> > > + }
> > > +
> > > + uci_dev->mtu = min_t(size_t, id->driver_data, MHI_MAX_MTU);
> > > + uci_dev->actual_mtu = uci_dev->mtu - sizeof(struct uci_buf);
> > > + dev_set_drvdata(&mhi_dev->dev, uci_dev);
> > > + uci_dev->enabled = true;
> > > +
> > > + list_add(&uci_dev->node, &mhi_uci_drv.head);
> > > + mutex_unlock(&mhi_uci_drv.lock);
> > > + mutex_unlock(&uci_dev->mutex);
> > > +
> > > + dev_info(dev, "channel:%s successfully probed\n", mhi_dev->name);
> > > +
> > > + return 0;
> > > +};
> > > +
> > > +static void mhi_uci_remove(struct mhi_device *mhi_dev)
> > > +{
> > > + struct uci_dev *uci_dev = dev_get_drvdata(&mhi_dev->dev);
> > > + struct device *dev = &mhi_dev->dev;
> > > +
> > > + dev_dbg(dev, "%s: enter\n", __func__);
> > > +
> >
> > Drop this.
> I can remove the enter and exit from the message but it helps to debug race
> conditions between remove() and open()/release(). i Can say something like
> removing mhi_dev->name

Okay.

> >
> > > + mutex_lock(&mhi_uci_drv.lock);
> > > + mutex_lock(&uci_dev->mutex);
> > > +
> > > + /* disable the node */
> > > + spin_lock_irq(&uci_dev->dl_chan.lock);
> > > + spin_lock_irq(&uci_dev->ul_chan.lock);
> > > + uci_dev->enabled = false;
> > > + spin_unlock_irq(&uci_dev->ul_chan.lock);
> > > + spin_unlock_irq(&uci_dev->dl_chan.lock);
> >
> > You need to do something better here. This doesn't look good.
> Will come up with change to fix lock related concerns.
> >
> > > + wake_up(&uci_dev->dl_chan.wq);
> > > + wake_up(&uci_dev->ul_chan.wq);
> > > +
> > > + /* delete the node to prevent new opens */
> > > + device_destroy(mhi_uci_drv.class, uci_dev->devt);
> > > + uci_dev->dev = NULL;
> > > + list_del(&uci_dev->node);
> > > +
> > > + /* safe to free memory only if all file nodes are closed */
> >
> > And what if it is already freed in .release?
> It is possible that ref_count becomes 0 in release() then it would be no-op
> here.

No-op? You are calling kfree again.

> >
> > > + if (!uci_dev->ref_count) {
> > > + mutex_unlock(&uci_dev->mutex);
> > > + mutex_destroy(&uci_dev->mutex);
> > > + clear_bit(MINOR(uci_dev->devt), uci_minors);
> > > + dev_set_drvdata(&mhi_dev->dev, NULL);
> > > + kfree(uci_dev);
> > > + mutex_unlock(&mhi_uci_drv.lock);
> > > + return;
> > > + }
> > > +
> > > + mutex_unlock(&uci_dev->mutex);
> > > + mutex_unlock(&mhi_uci_drv.lock);
> > > +
> > > + dev_dbg(dev, "%s: exit\n", __func__);
> >
> > Drop this.
> I can change it to mhi_dev->name removed. It helps in debugging race
> conditions.

Okay.

> >
> > Thanks,
> > Mani
> >
> > > +}
> > > +
> > > +/* .driver_data stores max mtu */
> > > +static const struct mhi_device_id mhi_uci_match_table[] = {
> > > + { .chan = "LOOPBACK", .driver_data = 0x1000 },
> > > + {},
> > > +};
> > > +MODULE_DEVICE_TABLE(mhi, mhi_uci_match_table);
> > > +
> > > +static struct mhi_driver mhi_uci_driver = {
> > > + .id_table = mhi_uci_match_table,
> > > + .remove = mhi_uci_remove,
> > > + .probe = mhi_uci_probe,
> > > + .ul_xfer_cb = mhi_ul_xfer_cb,
> > > + .dl_xfer_cb = mhi_dl_xfer_cb,
> > > + .driver = {
> > > + .name = MHI_UCI_DRIVER_NAME,
> > > + },
> > > +};
> > > +
> > > +static int mhi_uci_init(void)
> > > +{
> > > + int ret;
> > > +
> > > + ret = register_chrdev(0, MHI_UCI_DRIVER_NAME, &mhidev_fops);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + mhi_uci_drv.major = ret;
> > > + mhi_uci_drv.class = class_create(THIS_MODULE, MHI_UCI_DRIVER_NAME);
> > > + if (IS_ERR(mhi_uci_drv.class)) {
> > > + unregister_chrdev(mhi_uci_drv.major, MHI_UCI_DRIVER_NAME);
> > > + return -ENODEV;
> > > + }
> > > +
> > > + mutex_init(&mhi_uci_drv.lock);
> > > + INIT_LIST_HEAD(&mhi_uci_drv.head);
> > > +
> > > + ret = mhi_driver_register(&mhi_uci_driver);
> > > + if (ret) {
> > > + class_destroy(mhi_uci_drv.class);
> > > + unregister_chrdev(mhi_uci_drv.major, MHI_UCI_DRIVER_NAME);
> > > + }
> > > +
> > > + return ret;
> > > +}
> > > +
> > > +static void __exit mhi_uci_exit(void)
> > > +{
> > > + mhi_driver_unregister(&mhi_uci_driver);
> > > + class_destroy(mhi_uci_drv.class);
> > > + unregister_chrdev(mhi_uci_drv.major, MHI_UCI_DRIVER_NAME);
> > > +}
> > > +
> > > +module_init(mhi_uci_init);
> > > +module_exit(mhi_uci_exit);
> > > +MODULE_LICENSE("GPL v2");
> > > +MODULE_DESCRIPTION("MHI UCI Driver");
> > > --
> > > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> > > a Linux Foundation Collaborative Project
> > >
>
> I have some follow up questions based on your review comments. Please let me
> know your view on those questions above.
>
> Thanks,
> Hemant
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project

\
 
 \ /
  Last update: 2020-07-22 10:47    [W:0.113 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site