lkml.org 
[lkml]   [2020]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 3/4] serial: 8250_dw: Pass the same rate to the clk round and set rate methods
Date
Indeed according to the clk API if clk_round_rate() has successfully
accepted a rate, then in order setup the clock with value returned by the
clk_round_rate() the clk_set_rate() method must be called with the
original rate value.

Suggested-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

---

Changelog v8:
- This is a new patch created by the Russell King suggestion.
---
drivers/tty/serial/8250/8250_dw.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 12866083731d..c1511f9244bb 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -275,15 +275,15 @@ dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios,
struct ktermios *old)
{
- unsigned int baud = tty_termios_baud_rate(termios);
+ unsigned long newrate = tty_termios_baud_rate(termios) * 16;
struct dw8250_data *d = to_dw8250_data(p->private_data);
long rate;
int ret;

clk_disable_unprepare(d->clk);
- rate = clk_round_rate(d->clk, baud * 16);
+ rate = clk_round_rate(d->clk, newrate);
if (rate > 0) {
- ret = clk_set_rate(d->clk, rate);
+ ret = clk_set_rate(d->clk, newrate);
if (!ret)
p->uartclk = rate;
}
--
2.26.2
\
 
 \ /
  Last update: 2020-07-23 02:35    [W:0.089 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site