lkml.org 
[lkml]   [2020]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH RFC v2 02/18] irq/dev-msi: Add support for a new DEV_MSI irq domain
    On Wed, Jul 22, 2020 at 07:52:33PM +0100, Marc Zyngier wrote:

    > Which is exactly what platform-MSI already does. Why do we need
    > something else?

    It looks to me like all the code is around managing the
    dev->msi_domain of the devices.

    The intended use would have PCI drivers create children devices using
    mdev or virtbus and those devices wouldn't have a msi_domain from the
    platform. Looks like platform_msi_alloc_priv_data() fails immediately
    because dev->msi_domain will be NULL for these kinds of devices.

    Maybe that issue should be handled directly instead of wrappering
    platform_msi_*?

    For instance a trivial addition to the platform_msi API:

    platform_msi_assign_domain(struct_device *newly_created_virtual_device,
    struct device *physical_device);

    Which could set the msi_domain of new device using the topology of
    physical_device to deduce the correct domain?

    Then the question is how to properly create a domain within the
    hardware topology of physical_device with the correct parameters for
    the platform.

    Why do we need a dummy msi_domain anyhow? Can this just use
    physical_device->msi_domain directly? (I'm at my limit here of how
    much of this I remember, sorry)

    If you solve that it should solve the remapping problem too, as the
    physical_device is already assigned by the platform to a remapping irq
    domain if that is what the platform wants.

    >> + parent = irq_get_default_host();
    > Really? How is it going to work once you have devices sending their
    > MSIs to two different downstream blocks? This looks rather
    > short-sighted.

    .. and fix this too, the parent domain should be derived from the
    topology of the physical_device which is originating the interrupt
    messages.

    > On the other hand, masking an interrupt is an irqchip operation, and
    > only concerns the irqchip level. Here, you seem to be making it an
    > end-point operation, which doesn't really make sense to me. Or is this
    > device its own interrupt controller as well? That would be extremely
    > surprising, and I'd expect some block downstream of the device to be
    > able to control the masking of the interrupt.

    These are message interrupts so they originate directly from the
    device and generally travel directly to the CPU APIC. On the wire
    there is no difference between a MSI, MSI-X and a device using the
    dev-msi approach.

    IIRC on Intel/AMD at least once a MSI is launched it is not maskable.

    So the model for MSI is always "mask at source". The closest mapping
    to the Linux IRQ model is to say the end device has a irqchip that
    encapsulates the ability of the device to generate the MSI in the
    first place.

    It looks like existing platform_msi drivers deal with "masking"
    implicitly by halting the device interrupt generation before releasing
    the interrupt and have no way for the generic irqchip layer to mask
    the interrupt.

    I suppose the motivation to make it explicit is related to vfio using
    the generic mask/unmask functionality?

    Explicit seems better, IMHO.

    Jason

    \
     
     \ /
      Last update: 2020-07-22 22:02    [W:3.692 / U:0.020 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site