lkml.org 
[lkml]   [2020]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/40] scsi: pm8001: pm8001_sas: Mover function header and supply some missing parameter descriptions
Date
Functions must follow directly after the header that documents them.

Fixes the following W=1 kernel build warning(s):

from drivers/scsi/pm8001/pm8001_sas.c:41:
inlined from ‘pm8001_issue_ssp_tmf’ at drivers/scsi/pm8001/pm8001_sas.c:919:2:
drivers/scsi/pm8001/pm8001_sas.c:379: warning: Function parameter or member 'pm8001_dev' not described in 'DEV_IS_GONE'
drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'task' description in 'DEV_IS_GONE'
drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'num' description in 'DEV_IS_GONE'
drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'gfp_flags' description in 'DEV_IS_GONE'
drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'is_tmf' description in 'DEV_IS_GONE'
drivers/scsi/pm8001/pm8001_sas.c:379: warning: Excess function parameter 'tmf' description in 'DEV_IS_GONE'
drivers/scsi/pm8001/pm8001_sas.c:583: warning: Function parameter or member 'device_id' not described in 'pm8001_find_dev'
drivers/scsi/pm8001/pm8001_sas.c:1000: warning: Function parameter or member 'dev' not described in 'pm8001_I_T_nexus_reset'

Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/scsi/pm8001/pm8001_sas.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 941f783897d8e..bcf169b26e31a 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -129,6 +129,7 @@ int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
*pphys_addr_lo = lower_32_bits(phys_align);
return 0;
}
+
/**
* pm8001_find_ha_by_dev - from domain device which come from sas layer to
* find out our hba struct.
@@ -366,17 +367,15 @@ static int sas_find_local_port_id(struct domain_device *dev)
return 0;
}

+#define DEV_IS_GONE(pm8001_dev) \
+ ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
/**
* pm8001_task_exec - queue the task(ssp, smp && ata) to the hardware.
* @task: the task to be execute.
- * @num: if can_queue great than 1, the task can be queued up. for SMP task,
- * we always execute one one time.
* @gfp_flags: gfp_flags.
* @is_tmf: if it is task management task.
* @tmf: the task management IU
*/
-#define DEV_IS_GONE(pm8001_dev) \
- ((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
static int pm8001_task_exec(struct sas_task *task,
gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
{
@@ -577,6 +576,7 @@ static struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
/**
* pm8001_find_dev - find a matching pm8001_device
* @pm8001_ha: our hba card information
+ * @device_id: device ID to match against
*/
struct pm8001_device *pm8001_find_dev(struct pm8001_hba_info *pm8001_ha,
u32 device_id)
@@ -995,6 +995,7 @@ void pm8001_open_reject_retry(
/**
* Standard mandates link reset for ATA (type 0) and hard reset for
* SSP (type 1) , only for RECOVERY
+ * @dev: the device structure for the device to reset.
*/
int pm8001_I_T_nexus_reset(struct domain_device *dev)
{
--
2.25.1
\
 
 \ /
  Last update: 2020-07-21 18:44    [W:0.147 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site