lkml.org 
[lkml]   [2020]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/7] dt-bindings: usb: bdc: Update compatible strings
Date
Remove "brcm,bdc-v0.16" because it was never used on any system.
Add "brcm,bdc-udc-v2" which exists for any STB system with BDC.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
---
Documentation/devicetree/bindings/usb/brcm,bdc.txt | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/brcm,bdc.txt b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
index 63e63af3bf59..c9f52b97cef1 100644
--- a/Documentation/devicetree/bindings/usb/brcm,bdc.txt
+++ b/Documentation/devicetree/bindings/usb/brcm,bdc.txt
@@ -4,7 +4,7 @@ Broadcom USB Device Controller (BDC)
Required properties:

- compatible: must be one of:
- "brcm,bdc-v0.16"
+ "brcm,bdc-udc-v2"
"brcm,bdc"
- reg: the base register address and length
- interrupts: the interrupt line for this controller
@@ -21,7 +21,7 @@ On Broadcom STB platforms, these properties are required:
Example:

bdc@f0b02000 {
- compatible = "brcm,bdc-v0.16";
+ compatible = "brcm,bdc-udc-v2";
reg = <0xf0b02000 0xfc4>;
interrupts = <0x0 0x60 0x0>;
phys = <&usbphy_0 0x0>;
--
2.17.1
\
 
 \ /
  Last update: 2020-07-21 16:46    [W:0.272 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site