lkml.org 
[lkml]   [2020]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 0/8] Enable ili9341 and l3gd20 on stm32f429-disco
Hi, Alexandre,


On Tue, Jul 21, 2020 at 7:54 PM Alexandre Torgue
<alexandre.torgue@st.com> wrote:
>
>
>
> On 7/21/20 12:39 PM, dillon min wrote:
> > Hi Alexandre,
> >
> > On Tue, Jul 21, 2020 at 5:19 PM Alexandre Torgue
> > <alexandre.torgue@st.com> wrote:
> >>
> >> Hi Dillon
> >>
> >> On 5/25/20 5:40 AM, dillon.minfei@gmail.com wrote:
> >>> From: dillon min <dillon.minfei@gmail.com>
> >>>
> >>> V5's update based on Mark Brown's suggestion, use 'SPI_MASTER_MUST_RX'
> >>> for SPI_SIMPLEX_RX mode on stm32 spi controller.
> >>>
> >>> V5:
> >>> 1 instead of add send dummy data out under SIMPLEX_RX mode,
> >>> add flags 'SPI_CONTROLLER_MUST_TX' for stm32 spi driver
> >>> 2 bypass 'SPI_CONTROLLER_MUST_TX' and 'SPI_CONTROLLER_MUST_RX' under
> >>> 'SPI_3WIRE' mode
> >>>
> >>
> >> Concerning DT patches, they look goods for me. However I'll merge them
> >> when drivers parts will be merged.
> >>
> >> regards
> >> Alex
> > This patchset status is :
> > dts:
> > ARM: dts: stm32: Add dma config for spi5
> > ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
> > ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on
> > stm32429-disco board
> >
> > panel-bindings: Reviewed-by: Rob Herring, need more reviewing to merge
> > dt-bindings: display: panel: Add ilitek ili9341 panel bindings
> >
> > clk: Acked-by: Stephen Boyd , need more reviewing to merge
> > clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate,
> > fix duplicated ltdc clock register to 'clk_core' case ltdc's clock
> > turn off by clk_disable_unused()
> >
> > drm-panel: Reviewed-by: Linus Walleij . need more reviewing to merge
> > drm/panel: Add ilitek ili9341 panel driver
> >
> > spi-driver: Acked-by: Mark Brown ,merged into mainline
> > spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
> > spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't
> > becoexit with 'SPI_3WIRE' mode
> >
> > For ili9341 drivers, it seems to need more time to review, or might be dropped.
> > since the drm maintainer might create a new interface to support
> > DPI,DBI,DSI in one driver.
> > Currently it's under discussion. I will rework the ili9341 driver after that.
> >
> > But, we can use the existing "drivers/gpu/drm/tiny/ili9341.c" driver to support
> > ili9341 on stm32f429-disco board only using the spi bus. except the
> > display refresh performance is not as good as the ltdc interface.
> >
> > I can submit a new patch just with dts changed this week for it, if you need.
> >
>
>
> Thanks for this status. I'm close to send my PR for v5.9. There is no
> needs to have an intermediate version (Except you absolutely want it).
>
> Thanks
> alex
Ok, I prefer to use the ltdc interface to drive ili9341 either.

Thanks,
Dillon.
>
> > Thanks,
> > Dillon.
> >>
> >>
> >>
> >>> V4:
> >>> According to alexandre torgue's suggestion, combine ili9341 and
> >>> l3gd20's modification on stm32f429-disco board to one patchset.
> >>>
> >>> Changes:
> >>>
> >>> ili9341:
> >>>
> >>> 1 update ili9341 panel driver according to Linus's suggestion
> >>> 2 drop V1's No.5 patch, sumbit new changes for clk-stm32f4
> >>> 3 merge l3gd20's change to this patchset
> >>>
> >>> V3:
> >>> 1 merge original tiny/ili9341.c driver to panel/panel-ilitek-ili9341.c
> >>> to support serial spi & parallel rgb interface in one driver.
> >>> 2 update ilitek,ili9341.yaml dts binding documentation.
> >>> 3 update stm32f429-disco dts binding
> >>>
> >>> V2:
> >>> 1 verify ilitek,ili9341.yaml with make O=../linux-stm32
> >>> dt_binding_check
> >>> DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/panel/
> >>> ilitek,ili9341.yaml
> >>>
> >>> V1:
> >>> 1 add ili9341 drm panel driver
> >>> 2 add ltdc, spi5 controller for stm32f429-disco
> >>> 3 add ltdc, spi5 pin map for stm32f429-disco
> >>> 4 add docs about ili9341
> >>> 5 fix ltdc driver loading hang in clk set rate bug
> >>>
> >>>
> >>> L3gd20:
> >>> V3:
> >>> 1 merge stm32f429-disco dtbs binding with ili9341 part
> >>>
> >>> V2:
> >>> 1 insert blank line at stm32f420-disco.dts line 143
> >>> 2 add more description for l3gd20 in commit message
> >>>
> >>> V1:
> >>> 1 enable spi5 controller on stm32f429-disco (dts)
> >>> 2 add spi5 pinmap for stm32f429-disco (dts)
> >>> 3 add SPI_SIMPLEX_RX, SPI_3WIRE_RX support for stm32f4
> >>>
> >>>
> >>> dillon min (8):
> >>> ARM: dts: stm32: Add dma config for spi5
> >>> ARM: dts: stm32: Add pin map for ltdc & spi5 on stm32f429-disco board
> >>> ARM: dts: stm32: enable ltdc binding with ili9341, gyro l3gd20 on
> >>> stm32429-disco board
> >>> dt-bindings: display: panel: Add ilitek ili9341 panel bindings
> >>> clk: stm32: Fix stm32f429's ltdc driver hang in set clock rate,
> >>> fix duplicated ltdc clock register to 'clk_core' case ltdc's clock
> >>> turn off by clk_disable_unused()
> >>> drm/panel: Add ilitek ili9341 panel driver
> >>> spi: stm32: Add 'SPI_SIMPLEX_RX', 'SPI_3WIRE_RX' support for stm32f4
> >>> spi: flags 'SPI_CONTROLLER_MUST_RX' and 'SPI_CONTROLLER_MUST_TX' can't
> >>> be coexit with 'SPI_3WIRE' mode
> >>>
> >>> .../bindings/display/panel/ilitek,ili9341.yaml | 69 ++
> >>> arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 67 +
> >>> arch/arm/boot/dts/stm32f429-disco.dts | 48 +
> >>> arch/arm/boot/dts/stm32f429.dtsi | 3 +
> >>> drivers/clk/clk-stm32f4.c | 7 +-
> >>> drivers/gpu/drm/panel/Kconfig | 12 +
> >>> drivers/gpu/drm/panel/Makefile | 1 +
> >>> drivers/gpu/drm/panel/panel-ilitek-ili9341.c | 1301 ++++++++++++++++++++
> >>> drivers/spi/spi-stm32.c | 19 +-
> >>> drivers/spi/spi.c | 3 +-
> >>> 10 files changed, 1521 insertions(+), 9 deletions(-)
> >>> create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml
> >>> create mode 100644 drivers/gpu/drm/panel/panel-ilitek-ili9341.c
> >>>

\
 
 \ /
  Last update: 2020-07-21 14:56    [W:0.225 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site