lkml.org 
[lkml]   [2020]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] iommu/mediatek: check 4GB mode by reading infracfg
From
Date
On 21.07.20 04:16, Miles Chen wrote:
> In previous discussion [1] and [2], we found that it is risky to
> use max_pfn or totalram_pages to tell if 4GB mode is enabled.
>
> Check 4GB mode by reading infracfg register, remove the usage
> of the un-exported symbol max_pfn.
>
> This is a step towards building mtk_iommu as a kernel module.
>
> Change since v1:
> 1. remove the phandle usage, search for infracfg instead [3]
> 2. use infracfg instead of infracfg_regmap
> 3. move infracfg definitaions to linux/soc/mediatek/infracfg.h
> 4. update enable_4GB only when has_4gb_mode

Nit: We tend to place such information below the "---" (adding a second
one) such that this information is discarded when the patch is picked up.

>
> [1] https://lkml.org/lkml/2020/6/3/733
> [2] https://lkml.org/lkml/2020/6/4/136
> [3] https://lkml.org/lkml/2020/7/15/1147
>
> Cc: Mike Rapoport <rppt@linux.ibm.com>
> Cc: David Hildenbrand <david@redhat.com>
> Cc: Yong Wu <yong.wu@mediatek.com>
> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Yong Wu <yong.wu@mediatek.com>
> Cc: Chao Hao <chao.hao@mediatek.com>
> Cc: Rob Herring <robh@kernel.org>
> Cc: Matthias Brugger <matthias.bgg@gmail.com>
> Signed-off-by: Miles Chen <miles.chen@mediatek.com>
> ---
> drivers/iommu/mtk_iommu.c | 26 +++++++++++++++++++++-----
> include/linux/soc/mediatek/infracfg.h | 3 +++
> 2 files changed, 24 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 2be96f1cdbd2..16765f532853 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -3,7 +3,6 @@
> * Copyright (c) 2015-2016 MediaTek Inc.
> * Author: Yong Wu <yong.wu@mediatek.com>
> */
> -#include <linux/memblock.h>
> #include <linux/bug.h>
> #include <linux/clk.h>
> #include <linux/component.h>
> @@ -15,13 +14,16 @@
> #include <linux/iommu.h>
> #include <linux/iopoll.h>
> #include <linux/list.h>
> +#include <linux/mfd/syscon.h>
> #include <linux/of_address.h>
> #include <linux/of_iommu.h>
> #include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/regmap.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> +#include <linux/soc/mediatek/infracfg.h>
> #include <asm/barrier.h>
> #include <soc/mediatek/smi.h>
>
> @@ -599,8 +601,10 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> struct resource *res;
> resource_size_t ioaddr;
> struct component_match *match = NULL;
> + struct regmap *infracfg;
> void *protect;
> int i, larb_nr, ret;
> + u32 val;
>
> data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> if (!data)
> @@ -614,10 +618,22 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> return -ENOMEM;
> data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
>
> - /* Whether the current dram is over 4GB */
> - data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
> - if (!data->plat_data->has_4gb_mode)
> - data->enable_4GB = false;
> + data->enable_4GB = false;
> + if (data->plat_data->has_4gb_mode) {
> + infracfg = syscon_regmap_lookup_by_compatible(
> + "mediatek,mt8173-infracfg");
> + if (IS_ERR(infracfg)) {
> + infracfg = syscon_regmap_lookup_by_compatible(
> + "mediatek,mt2712-infracfg");
> + if (IS_ERR(infracfg))
> + return PTR_ERR(infracfg);
> +
> + }
> + ret = regmap_read(infracfg, REG_INFRA_MISC, &val);
> + if (ret)
> + return ret;
> + data->enable_4GB = !!(val & F_DDR_4GB_SUPPORT_EN);

(I am absolutely not familiar with syscon_regmap_lookup_by ..., I am
missing some context, so sorry for the stupid questions)

Who sets the regmap value and based on what? Who decides that 4GB mode
is supported or not? And who decides if 4GB mode is *required* or not?

--
Thanks,

David / dhildenb

\
 
 \ /
  Last update: 2020-07-21 11:12    [W:2.569 / U:0.000 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site