lkml.org 
[lkml]   [2020]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 3/3] arm64: dts: meson: add audio playback to u200
Date

On Sun 19 Jul 2020 at 04:45, Christian Hewitt <christianshewitt@gmail.com> wrote:

> Add initial support limited to HDMI i2s and S/PDIF (LPCM).

Nack.

#1. Same comment as before on spdifout B and SPDIF HDMI input.
#2. the u200 is a special reference device with 2 onboards codecs,
external connector for audio daugther boards and internal codec.
I don't see another board using that configuration, which would make
them incompatible
#3. TDM B is a bad choice on this board as it connected to one of the
i2s codecs of the board, which won't take 4 lines ine.

>
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> .../boot/dts/amlogic/meson-g12a-u200.dts | 131 ++++++++++++++++++
> 1 file changed, 131 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> index a26bfe72550f..dde7e258a184 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts
> @@ -8,6 +8,7 @@
> #include "meson-g12a.dtsi"
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/gpio/meson-g12a-gpio.h>
> +#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
>
> / {
> compatible = "amlogic,u200", "amlogic,g12a";
> @@ -18,6 +19,13 @@
> ethernet0 = &ethmac;
> };
>
> + spdif_dit: audio-codec-1 {
> + #sound-dai-cells = <0>;
> + compatible = "linux,spdif-dit";
> + status = "okay";
> + sound-name-prefix = "DIT";
> + };
> +
> chosen {
> stdout-path = "serial0:115200n8";
> };
> @@ -147,6 +155,91 @@
> regulator-boot-on;
> regulator-always-on;
> };
> +
> +
> + sound {
> + compatible = "amlogic,axg-sound-card";
> + model = "G12A-U200";
> + audio-aux-devs = <&tdmout_b>;
> + audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
> + "TDMOUT_B IN 1", "FRDDR_B OUT 1",
> + "TDMOUT_B IN 2", "FRDDR_C OUT 1",
> + "TDM_B Playback", "TDMOUT_B OUT",
> + "SPDIFOUT IN 0", "FRDDR_A OUT 3",
> + "SPDIFOUT IN 1", "FRDDR_B OUT 3",
> + "SPDIFOUT IN 2", "FRDDR_C OUT 3";
> +
> + assigned-clocks = <&clkc CLKID_MPLL2>,
> + <&clkc CLKID_MPLL0>,
> + <&clkc CLKID_MPLL1>;
> + assigned-clock-parents = <0>, <0>, <0>;
> + assigned-clock-rates = <294912000>,
> + <270950400>,
> + <393216000>;
> + status = "okay";
> +
> + dai-link-0 {
> + sound-dai = <&frddr_a>;
> + };
> +
> + dai-link-1 {
> + sound-dai = <&frddr_b>;
> + };
> +
> + dai-link-2 {
> + sound-dai = <&frddr_c>;
> + };
> +
> + /* 8ch hdmi interface */
> + dai-link-3 {
> + sound-dai = <&tdmif_b>;
> + dai-format = "i2s";
> + dai-tdm-slot-tx-mask-0 = <1 1>;
> + dai-tdm-slot-tx-mask-1 = <1 1>;
> + dai-tdm-slot-tx-mask-2 = <1 1>;
> + dai-tdm-slot-tx-mask-3 = <1 1>;
> + mclk-fs = <256>;
> +
> + codec {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
> + };
> + };
> +
> + /* spdif hdmi or toslink interface */
> + dai-link-4 {
> + sound-dai = <&spdifout>;
> +
> + codec-0 {
> + sound-dai = <&spdif_dit>;
> + };
> +
> + codec-1 {
> + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
> + };
> + };
> +
> + /* spdif hdmi interface */
> + dai-link-5 {
> + sound-dai = <&spdifout_b>;
> +
> + codec {
> + sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
> + };
> + };
> +
> + /* hdmi glue */
> + dai-link-6 {
> + sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
> +
> + codec {
> + sound-dai = <&hdmi_tx>;
> + };
> + };
> + };
> +};
> +
> +&arb {
> + status = "okay";
> };
>
> &cec_AO {
> @@ -163,6 +256,10 @@
> hdmi-phandle = <&hdmi_tx>;
> };
>
> +&clkc_audio {
> + status = "okay";
> +};
> +
> &cpu0 {
> cpu-supply = <&vddcpu>;
> operating-points-v2 = <&cpu_opp_table>;
> @@ -203,6 +300,18 @@
> phy-mode = "rmii";
> };
>
> +&frddr_a {
> + status = "okay";
> +};
> +
> +&frddr_b {
> + status = "okay";
> +};
> +
> +&frddr_c {
> + status = "okay";
> +};
> +
> &hdmi_tx {
> status = "okay";
> pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
> @@ -288,6 +397,28 @@
> vqmmc-supply = <&flash_1v8>;
> };
>
> +&spdifout {
> + pinctrl-0 = <&spdif_out_h_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&spdifout_b {
> + status = "okay";
> +};
> +
> +&tdmif_b {
> + status = "okay";
> +};
> +
> +&tdmout_b {
> + status = "okay";
> +};
> +
> +&tohdmitx {
> + status = "okay";
> +};
> +
> &uart_AO {
> status = "okay";
> pinctrl-0 = <&uart_ao_a_pins>;

\
 
 \ /
  Last update: 2020-07-21 11:07    [W:0.046 / U:0.992 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site