lkml.org 
[lkml]   [2020]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v31 03/12] leds: lp50xx: Add the LP50XX family of the RGB LED driver
Hi!

> The device has the ability to group LED output into control banks
> so that multiple LED banks can be controlled with the same mixing and
> brightness. Inversely the LEDs can also be controlled independently.

Inversely?

> --- /dev/null
> +++ b/drivers/leds/leds-lp50xx.c
> @@ -0,0 +1,784 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// TI LP50XX LED chip family driver
> +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
> +

Can we get https here and in the binding document?

Please run this through checkpatch -- I believe it will have some
comments.

> +
> + device_for_each_child_node(priv->dev, child) {
> + led = &priv->leds[i];
> + ret = fwnode_property_count_u32(child, "reg");
> + if (ret < 0) {
> + dev_err(&priv->client->dev,
> + "reg property is invalid\n");
> + return -EINVAL;

is handle_put(child) needed here?

> + }
> + if (ret > 1) {
> + priv->num_of_banked_leds = ret;
> + if (priv->num_of_banked_leds >
> + priv->chip_info->max_modules) {
> + dev_err(&priv->client->dev,
> + "reg property is invalid\n");
> + ret = -EINVAL;
> + fwnode_handle_put(child);
> + goto child_out;
> + }
> +
> + ret = fwnode_property_read_u32_array(child,
> + "reg",
> + led_banks,
> + ret);

Move this to subfunction to reduce the indentation? (Or, just refactor
it somehow).

> + if (ret) {
> + dev_err(&priv->client->dev,
> + "reg property is missing\n");
> + fwnode_handle_put(child);
> + goto child_out;
> + }

Create label that does the handle_put so you don't need to repeat it
quite so often?

> + fwnode_for_each_child_node(child, led_node) {
> + ret = fwnode_property_read_u32(led_node, "color",
> + &color_id);
> + if (ret)
> + dev_err(priv->dev, "Cannot read color\n");
> +
> + mc_led_info[num_colors].color_index = color_id;

This uses undefined value.

> + ret = lp50xx_reset(led);

Does the GPIO need to be disabled before enabling it for reset?

Best regards,
Pavel

--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-07-21 23:06    [W:0.125 / U:0.604 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site