lkml.org 
[lkml]   [2020]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] spi: dw-dma: Fix Tx DMA channel working too fast
Date
It turns out having a Rx DMA channel serviced with higher priority than
a Tx DMA channel is not enough to provide a well balanced DMA-based SPI
transfer interface. There might still be moments when the Tx DMA channel
is occasionally handled faster than the Rx DMA channel. That in its turn
will eventually cause the SPI Rx FIFO overflow if SPI bus speed is high
enough to fill the SPI Rx FIFO in before it's cleared by the Rx DMA
channel. That's why having the DMA-based SPI Tx interface too optimized
is the errors prone, so the commit 0b2b66514fc9 ("spi: dw: Use DMA max
burst to set the request thresholds") though being perfectly normal from
the standard functionality point of view implicitly introduced the problem
described above. In order to fix that the Tx DMA activity is intentionally
slowed down by limiting the SPI Tx FIFO depth with a value twice bigger
than the Tx burst length calculated earlier by the
dw_spi_dma_maxburst_init() method.

Fixes: 0b2b66514fc9 ("spi: dw: Use DMA max burst to set the request thresholds")
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
drivers/spi/spi-dw-dma.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c
index 5986c520b196..bb390ff67d1d 100644
--- a/drivers/spi/spi-dw-dma.c
+++ b/drivers/spi/spi-dw-dma.c
@@ -372,8 +372,20 @@ static int dw_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer)
{
u16 imr = 0, dma_ctrl = 0;

+ /*
+ * Having a Rx DMA channel serviced with higher priority than a Tx DMA
+ * channel might not be enough to provide a well balanced DMA-based
+ * SPI transfer interface. There might still be moments when the Tx DMA
+ * channel is occasionally handled faster than the Rx DMA channel.
+ * That in its turn will eventually cause the SPI Rx FIFO overflow if
+ * SPI bus speed is high enough to fill the SPI Rx FIFO in before it's
+ * cleared by the Rx DMA channel. In order to fix the problem the Tx
+ * DMA activity is intentionally slowed down by limiting the SPI Tx
+ * FIFO depth with a value twice bigger than the Tx burst length
+ * calculated earlier by the dw_spi_dma_maxburst_init() method.
+ */
dw_writel(dws, DW_SPI_DMARDLR, dws->rxburst - 1);
- dw_writel(dws, DW_SPI_DMATDLR, dws->fifo_len - dws->txburst);
+ dw_writel(dws, DW_SPI_DMATDLR, dws->txburst);

if (xfer->tx_buf)
dma_ctrl |= SPI_DMA_TDMAE;
--
2.26.2
\
 
 \ /
  Last update: 2020-07-21 22:41    [W:0.856 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site