lkml.org 
[lkml]   [2020]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC 0/7] Add support to process rx packets in thread
On Tue, Jul 21, 2020 at 10:44:19PM +0530, Rakesh Pillai wrote:
> NAPI gets scheduled on the CPU core which got the
> interrupt. The linux scheduler cannot move it to a
> different core, even if the CPU on which NAPI is running
> is heavily loaded. This can lead to degraded wifi
> performance when running traffic at peak data rates.
>
> A thread on the other hand can be moved to different
> CPU cores, if the one on which its running is heavily
> loaded. During high incoming data traffic, this gives
> better performance, since the thread can be moved to a
> less loaded or sometimes even a more powerful CPU core
> to account for the required CPU performance in order
> to process the incoming packets.
>
> This patch series adds the support to use a high priority
> thread to process the incoming packets, as opposed to
> everything being done in NAPI context.

I don't see why this problem is limited to the ath10k driver. I expect
it applies to all drivers using NAPI. So shouldn't you be solving this
in the NAPI core? Allow a driver to request the NAPI core uses a
thread?

Andrew

\
 
 \ /
  Last update: 2020-07-21 19:27    [W:0.270 / U:0.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site