lkml.org 
[lkml]   [2020]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v9 08/15] s390/vfio-ap: filter matrix for unavailable queue devices
Date
Even though APQNs for queues that are not in the host's AP configuration
may be assigned to a matrix mdev, we do not want to set bits in the guest's
APCB for APQNs that do not reference AP queue devices bound to the vfio_ap
device driver. Ideally, it would be great if such APQNs could be filtered
out before setting the bits in the guest's APCB; however, the architecture
precludes filtering individual APQNs. Consequently, either the APID or APQI
must be filtered.

This patch introduces code to filter the APIDs or APQIs assigned to the
matrix mdev's AP configuration before assigning them to the guest's AP
configuration (i.e., APCB). We'll start by filtering the APIDs:

If an APQN assigned to the matrix mdev's AP configuration does not
reference a queue device bound to the vfio_ap device driver, the APID
will be filtered out (i.e., not assigned to the guest's APCB).

If every APID assigned to the matrix mdev is filtered out, then we'll try
filtering the APQI's:

If an APQN assigned to the matrix mdev's AP configuration does not
reference a queue device bound to the vfio_ap device driver, the APQI
will be filtered out (i.e., not assigned to the guest's APCB).

In any case, if after filtering either the APIDs or APQIs there are any
APQNs that can be assigned to the guest's APCB, they will be assigned and
the CRYCB will be hot plugged into the guest.

Example
=======

APQNs bound to vfio_ap device driver:
04.0004
04.0047
04.0054

05.0005
05.0047
05.0054

Assignments to matrix mdev:
APIDs APQIs -> APQNs
04 0004 04.0004
05 0005 04.0005
0047 04.0047
0054 04.0054
05.0004
05.0005
05.0047
04.0054

Filter APIDs:
APID 04 will be filtered because APQN 04.0005 is not bound.
APID 05 will be filtered because APQN 05.0004 is not bound.
APQNs remaining: None

Filter APQIs:
APQI 04 will be filtered because APQN 05.0004 is not bound.
APQI 05 will be filtered because APQN 04.0005 is not bound.
APQNs remaining: 04.0047, 04.0054, 05.0047, 05.0054

APQNs 04.0047, 04.0054, 05.0047, 05.0054 will be assigned to the CRYCB and
hot plugged into the KVM guest.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
---
drivers/s390/crypto/vfio_ap_ops.c | 159 +++++++++++++++++++++++++++++-
1 file changed, 155 insertions(+), 4 deletions(-)

diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 30bf23734af6..eaf4e9eab6cb 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -326,7 +326,7 @@ static bool vfio_ap_mdev_has_crycb(struct ap_matrix_mdev *matrix_mdev)
return (matrix_mdev->kvm && matrix_mdev->kvm->arch.crypto.crycbd);
}

-static void vfio_ap_mdev_commit_crycb(struct ap_matrix_mdev *matrix_mdev)
+static void vfio_ap_mdev_commit_shadow_apcb(struct ap_matrix_mdev *matrix_mdev)
{
kvm_arch_crypto_set_masks(matrix_mdev->kvm,
matrix_mdev->shadow_apcb.apm,
@@ -597,6 +597,157 @@ static int vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *matrix_mdev,
return 0;
}

+/**
+ * vfio_ap_mdev_filter_matrix
+ *
+ * Filter APQNs assigned to the matrix mdev that do not reference an AP queue
+ * device bound to the vfio_ap device driver.
+ *
+ * @matrix_mdev: the matrix mdev whose AP configuration is to be filtered
+ * @shadow_apcb: the shadow of the KVM guest's APCB (contains AP configuration
+ * for guest)
+ * @filter_apids: boolean value indicating whether the APQNs shall be filtered
+ * by APID (true) or by APQI (false).
+ *
+ * Returns the number of APQNs remaining after filtering is complete.
+ */
+static int vfio_ap_mdev_filter_matrix(struct ap_matrix_mdev *matrix_mdev,
+ struct ap_matrix *shadow_apcb,
+ bool filter_apids)
+{
+ unsigned long apid, apqi, apqn;
+
+ memcpy(shadow_apcb, &matrix_mdev->matrix, sizeof(*shadow_apcb));
+
+ for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, AP_DEVICES) {
+ /*
+ * If the APID is not assigned to the host AP configuration,
+ * we can not assign it to the guest's AP configuration
+ */
+ if (!test_bit_inv(apid,
+ (unsigned long *)matrix_dev->info.apm)) {
+ clear_bit_inv(apid, shadow_apcb->apm);
+ continue;
+ }
+
+ for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
+ AP_DOMAINS) {
+ /*
+ * If the APQI is not assigned to the host AP
+ * configuration, then it can not be assigned to the
+ * guest's AP configuration
+ */
+ if (!test_bit_inv(apqi, (unsigned long *)
+ matrix_dev->info.aqm)) {
+ clear_bit_inv(apqi, shadow_apcb->aqm);
+ continue;
+ }
+
+ /*
+ * If the APQN is not bound to the vfio_ap device
+ * driver, then we can't assign it to the guest's
+ * AP configuration. The AP architecture won't
+ * allow filtering of a single APQN, so if we're
+ * filtering APIDs, then filter the APID; otherwise,
+ * filter the APQI.
+ */
+ apqn = AP_MKQID(apid, apqi);
+ if (!vfio_ap_get_queue(apqn)) {
+ if (filter_apids)
+ clear_bit_inv(apid, shadow_apcb->apm);
+ else
+ clear_bit_inv(apqi, shadow_apcb->aqm);
+ break;
+ }
+ }
+
+ /*
+ * If we're filtering APQIs and all of them have been filtered,
+ * there's no need to continue filtering.
+ */
+ if (!filter_apids)
+ if (bitmap_empty(shadow_apcb->aqm, AP_DOMAINS))
+ break;
+ }
+
+ return bitmap_weight(shadow_apcb->apm, AP_DEVICES) *
+ bitmap_weight(shadow_apcb->aqm, AP_DOMAINS);
+}
+
+/**
+ * vfio_ap_mdev_config_shadow_apcb
+ *
+ * Configure the shadow of a KVM guest's APCB specifying the adapters, domains
+ * and control domains to be assigned to the guest. The shadow APCB will be
+ * configured after filtering the APQNs assigned to the matrix mdev that do not
+ * reference a queue device bound to the vfio_ap device driver.
+ *
+ * @matrix_mdev: the matrix mdev whose shadow APCB is to be configured.
+ *
+ * Returns true if the shadow APCB contents have been changed; otherwise,
+ * returns false.
+ */
+static bool vfio_ap_mdev_config_shadow_apcb(struct ap_matrix_mdev *matrix_mdev)
+{
+ int napm, naqm;
+ struct ap_matrix shadow_apcb;
+
+ vfio_ap_matrix_init(&matrix_dev->info, &shadow_apcb);
+ napm = bitmap_weight(matrix_mdev->matrix.apm, AP_DEVICES);
+ naqm = bitmap_weight(matrix_mdev->matrix.aqm, AP_DOMAINS);
+
+ /*
+ * If there are no APIDs or no APQIs assigned to the matrix mdev,
+ * then no APQNs shall be assigned to the guest CRYCB.
+ */
+ if ((napm != 0) || (naqm != 0)) {
+ /*
+ * Filter the APIDs assigned to the matrix mdev for APQNs that
+ * do not reference an AP queue device bound to the driver.
+ */
+ napm = vfio_ap_mdev_filter_matrix(matrix_mdev, &shadow_apcb,
+ true);
+ /*
+ * If there are no APQNs that can be assigned to the guest's
+ * CRYCB after filtering, then try filtering the APQIs.
+ */
+ if (napm == 0) {
+ naqm = vfio_ap_mdev_filter_matrix(matrix_mdev,
+ &shadow_apcb, false);
+
+ /*
+ * If there are no APQNs that can be assigned to the
+ * matrix mdev after filtering the APQIs, then no APQNs
+ * shall be assigned to the guest's CRYCB.
+ */
+ if (naqm == 0) {
+ bitmap_clear(shadow_apcb.apm, 0, AP_DEVICES);
+ bitmap_clear(shadow_apcb.aqm, 0, AP_DOMAINS);
+ }
+ }
+ }
+
+ /*
+ * If the guest's AP configuration has not changed, then return
+ * indicating such.
+ */
+ if (bitmap_equal(matrix_mdev->shadow_apcb.apm, shadow_apcb.apm,
+ AP_DEVICES) &&
+ bitmap_equal(matrix_mdev->shadow_apcb.aqm, shadow_apcb.aqm,
+ AP_DOMAINS) &&
+ bitmap_equal(matrix_mdev->shadow_apcb.adm, shadow_apcb.adm,
+ AP_DOMAINS))
+ return false;
+
+ /*
+ * Copy the changes to the guest's CRYCB, then return indicating that
+ * the guest's AP configuration has changed.
+ */
+ memcpy(&matrix_mdev->shadow_apcb, &shadow_apcb, sizeof(shadow_apcb));
+
+ return true;
+}
+
enum qlink_type {
LINK_APID,
LINK_APQI,
@@ -1284,9 +1435,8 @@ static int vfio_ap_mdev_group_notifier(struct notifier_block *nb,
if (!vfio_ap_mdev_has_crycb(matrix_mdev))
return NOTIFY_DONE;

- memcpy(&matrix_mdev->shadow_apcb, &matrix_mdev->matrix,
- sizeof(matrix_mdev->shadow_apcb));
- vfio_ap_mdev_commit_crycb(matrix_mdev);
+ if (vfio_ap_mdev_config_shadow_apcb(matrix_mdev))
+ vfio_ap_mdev_commit_shadow_apcb(matrix_mdev);

return NOTIFY_OK;
}
@@ -1396,6 +1546,7 @@ static void vfio_ap_mdev_release(struct mdev_device *mdev)
mutex_lock(&matrix_dev->lock);
if (matrix_mdev->kvm) {
kvm_arch_crypto_clear_masks(matrix_mdev->kvm);
+ vfio_ap_matrix_clear_masks(&matrix_mdev->shadow_apcb);
matrix_mdev->kvm->arch.crypto.pqap_hook = NULL;
vfio_ap_mdev_reset_queues(mdev);
kvm_put_kvm(matrix_mdev->kvm);
--
2.21.1
\
 
 \ /
  Last update: 2020-07-20 17:06    [W:0.213 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site