lkml.org 
[lkml]   [2020]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] drm/bridge/adv7511: set the bridge type properly
Date
From: Laurentiu Palcu <laurentiu.palcu@nxp.com>

After the drm_bridge_connector_init() helper function has been added, the ADV
driver has been changed accordingly. However, the 'type' field of the bridge
structure was left unset, which makes the helper function always return -EINVAL.

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@nxp.com>
---
Hi,

I've hit this while trying to use this helper in the new i.MX8MQ DCSS
driver, as suggested by Sam, and I wanted to test it with NWL MIPI_DSI and
ADV since support is already in mainline.

Thanks,
laurentiu


drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index f45cdca9cce5..a0d392c338da 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -1283,6 +1283,7 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
adv7511->bridge.ops = DRM_BRIDGE_OP_DETECT | DRM_BRIDGE_OP_EDID
| DRM_BRIDGE_OP_HPD;
adv7511->bridge.of_node = dev->of_node;
+ adv7511->bridge.type = DRM_MODE_CONNECTOR_HDMIA;

drm_bridge_add(&adv7511->bridge);

--
2.23.0
\
 
 \ /
  Last update: 2020-07-20 14:45    [W:0.081 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site