lkml.org 
[lkml]   [2020]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH 0/5] cpuidle-pseries: Parse extended CEDE information for idle.
    * Gautham R Shenoy <ego@linux.vnet.ibm.com> [2020-07-07 16:41:34]:

    > From: "Gautham R. Shenoy" <ego@linux.vnet.ibm.com>
    >
    > Hi,
    >
    > On pseries Dedicated Linux LPARs, apart from the polling snooze idle
    > state, we currently have the CEDE idle state which cedes the CPU to
    > the hypervisor with latency-hint = 0.
    >
    > However, the PowerVM hypervisor supports additional extended CEDE
    > states, which can be queried through the "ibm,get-systems-parameter"
    > rtas-call with the CEDE_LATENCY_TOKEN. The hypervisor maps these
    > extended CEDE states to appropriate platform idle-states in order to
    > provide energy-savings as well as shifting power to the active
    > units. On existing pseries LPARs today we have extended CEDE with
    > latency-hints {1,2} supported.
    >
    > In Patches 1-3 of this patchset, we add the code to parse the CEDE
    > latency records provided by the hypervisor. We use this information to
    > determine the wakeup latency of the regular CEDE (which we have been
    > so far hardcoding to 10us while experimentally it is much lesser ~
    > 1us), by looking at the wakeup latency provided by the hypervisor for
    > Extended CEDE states. Since the platform currently advertises Extended
    > CEDE 1 to have wakeup latency of 2us, we can be sure that the wakeup
    > latency of the regular CEDE is no more than this.
    >
    > Patch 4 (currently marked as RFC), expose the extended CEDE states
    > parsed above to the cpuidle framework, provided that they can wakeup
    > on an interrupt. On current platforms only Extended CEDE 1 fits the
    > bill, but this is going to change in future platforms where even
    > Extended CEDE 2 may be responsive to external interrupts.
    >
    > Patch 5 (currently marked as RFC), filters out Extended CEDE 1 since
    > it offers no added advantage over the normal CEDE.
    >
    > With Patches 1-3, we see an improvement in the single-threaded
    > performance on ebizzy.
    >
    > 2 ebizzy threads bound to the same big-core. 25% improvement in the
    > avg records/s (higher the better) with patches 1-3.
    > x without_patches
    > * with_patches
    > N Min Max Median Avg Stddev
    > x 10 2491089 5834307 5398375 4244335 1596244.9
    > * 10 2893813 5834474 5832448 5327281.3 1055941.4
    >
    > We do not observe any major regression in either the context_switch2
    > benchmark or the schbench benchmark
    >
    > context_switch2 across CPU0 CPU1 (Both belong to same big-core, but different
    > small cores). We observe a minor 0.14% regression in the number of
    > context-switches (higher is better).
    > x without_patch
    > * with_patch
    > N Min Max Median Avg Stddev
    > x 500 348872 362236 354712 354745.69 2711.827
    > * 500 349422 361452 353942 354215.4 2576.9258
    >
    > context_switch2 across CPU0 CPU8 (Different big-cores). We observe a 0.37%
    > improvement in the number of context-switches (higher is better).
    > x without_patch
    > * with_patch
    > N Min Max Median Avg Stddev
    > x 500 287956 294940 288896 288977.23 646.59295
    > * 500 288300 294646 289582 290064.76 1161.9992
    >
    > schbench:
    > No major difference could be seen until the 99.9th percentile.
    >
    > Without-patch
    > Latency percentiles (usec)
    > 50.0th: 29
    > 75.0th: 39
    > 90.0th: 49
    > 95.0th: 59
    > *99.0th: 13104
    > 99.5th: 14672
    > 99.9th: 15824
    > min=0, max=17993
    >
    > With-patch:
    > Latency percentiles (usec)
    > 50.0th: 29
    > 75.0th: 40
    > 90.0th: 50
    > 95.0th: 61
    > *99.0th: 13648
    > 99.5th: 14768
    > 99.9th: 15664
    > min=0, max=29812

    This patch series mainly cleans up the CEDE latency discovery and
    prepares to add different cpuidle states in virtualised environment.
    This helps in improving SMT folding speeds and also power savings and
    power shifting with newer platform firmware.

    The current benefit is primarily from faster SMT folding and resulting
    single performance achieved by updating the platform firmware provided
    heuristics in the cpuidle states.

    --Vaidy



    \
     
     \ /
      Last update: 2020-07-20 07:50    [W:2.376 / U:0.236 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site