lkml.org 
[lkml]   [2020]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RFC v8 02/11] vhost: use batched get_vq_desc version
From
Date

On Mon, Jul 20, 2020 at 11:27 AM Michael S. Tsirkin <mst@redhat.com> wrote:
> On Thu, Jul 16, 2020 at 07:16:27PM +0200, Eugenio Perez Martin wrote:
> > On Fri, Jul 10, 2020 at 7:58 AM Michael S. Tsirkin <mst@redhat.com> wrote:
> > > On Fri, Jul 10, 2020 at 07:39:26AM +0200, Eugenio Perez Martin wrote:
> > > > > > How about playing with the batch size? Make it a mod parameter instead
> > > > > > of the hard coded 64, and measure for all values 1 to 64 ...
> > > > >
> > > > > Right, according to the test result, 64 seems to be too aggressive in
> > > > > the case of TX.
> > > > >
> > > >
> > > > Got it, thanks both!
> > >
> > > In particular I wonder whether with batch size 1
> > > we get same performance as without batching
> > > (would indicate 64 is too aggressive)
> > > or not (would indicate one of the code changes
> > > affects performance in an unexpected way).
> > >
> > > --
> > > MST
> > >
> >
> > Hi!
> >
> > Varying batch_size as drivers/vhost/net.c:VHOST_NET_BATCH,
>
> sorry this is not what I meant.
>
> I mean something like this:
>
>
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 0b509be8d7b1..b94680e5721d 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -1279,6 +1279,10 @@ static void handle_rx_net(struct vhost_work *work)
> handle_rx(net);
> }
>
> +MODULE_PARM_DESC(batch_num, "Number of batched descriptors. (offset from 64)");
> +module_param(batch_num, int, 0644);
> +static int batch_num = 0;
> +
> static int vhost_net_open(struct inode *inode, struct file *f)
> {
> struct vhost_net *n;
> @@ -1333,7 +1337,7 @@ static int vhost_net_open(struct inode *inode, struct file *f)
> vhost_net_buf_init(&n->vqs[i].rxq);
> }
> vhost_dev_init(dev, vqs, VHOST_NET_VQ_MAX,
> - UIO_MAXIOV + VHOST_NET_BATCH,
> + UIO_MAXIOV + VHOST_NET_BATCH + batch_num,
> VHOST_NET_PKT_WEIGHT, VHOST_NET_WEIGHT, true,
> NULL);
>
>
> then you can try tweaking batching and playing with mod parameter without
> recompiling.
>
>
> VHOST_NET_BATCH affects lots of other things.
>

Ok, got it. Since they were aligned from the start, I thought it was a good idea to maintain them in-sync.

> > and testing
> > the pps as previous mail says. This means that we have either only
> > vhost_net batching (in base testing, like previously to apply this
> > patch) or both batching sizes the same.
> >
> > I've checked that vhost process (and pktgen) goes 100% cpu also.
> >
> > For tx: Batching decrements always the performance, in all cases. Not
> > sure why bufapi made things better the last time.
> >
> > Batching makes improvements until 64 bufs, I see increments of pps but like 1%.
> >
> > For rx: Batching always improves performance. It seems that if we
> > batch little, bufapi decreases performance, but beyond 64, bufapi is
> > much better. The bufapi version keeps improving until I set a batching
> > of 1024. So I guess it is super good to have a bunch of buffers to
> > receive.
> >
> > Since with this test I cannot disable event_idx or things like that,
> > what would be the next step for testing?
> >
> > Thanks!
> >
> > --
> > Results:
> > # Buf size: 1,16,32,64,128,256,512
> >
> > # Tx
> > # ===
> > # Base
> > 2293304.308,3396057.769,3540860.615,3636056.077,3332950.846,3694276.154,3689820
> > # Batch
> > 2286723.857,3307191.643,3400346.571,3452527.786,3460766.857,3431042.5,3440722.286
> > # Batch + Bufapi
> > 2257970.769,3151268.385,3260150.538,3379383.846,3424028.846,3433384.308,3385635.231,3406554.538
> >
> > # Rx
> > # ==
> > # pktgen results (pps)
> > 1223275,1668868,1728794,1769261,1808574,1837252,1846436
> > 1456924,1797901,1831234,1868746,1877508,1931598,1936402
> > 1368923,1719716,1794373,1865170,1884803,1916021,1975160
> >
> > # Testpmd pps results
> > 1222698.143,1670604,1731040.6,1769218,1811206,1839308.75,1848478.75
> > 1450140.5,1799985.75,1834089.75,1871290,1880005.5,1934147.25,1939034
> > 1370621,1721858,1796287.75,1866618.5,1885466.5,1918670.75,1976173.5,1988760.75,1978316
> >
> > pktgen was run again for rx with 1024 and 2048 buf size, giving
> > 1988760.75 and 1978316 pps. Testpmd goes the same way.
>
> Don't really understand what does this data mean.
> Which number of descs is batched for each run?
>

Sorry, I should have explained better. I will expand here, but feel free to skip it since we are going to discard the
data anyway. Or to propose a better way to tell them.

Is a CSV with the values I've obtained, in pps, from pktgen and testpmd. This way is easy to plot them.

Maybe is easier as tables, if mail readers/gmail does not misalign them.

> > # Tx
> > # ===

Base: With the previous code, not integrating any patch. testpmd is txonly mode, tap interface is XDP_DROP everything.
We vary VHOST_NET_BATCH (1, 16, 32, ...). As Jason put in a previous mail:

TX: testpmd(txonly) -> virtio-user -> vhost_net -> XDP_DROP on TAP


1 | 16 | 32 | 64 | 128 | 256 | 512 |
2293304.308| 3396057.769| 3540860.615| 3636056.077| 3332950.846| 3694276.154| 3689820|

If we add the batching part of the series, but not the bufapi:

1 | 16 | 32 | 64 | 128 | 256 | 512 |
2286723.857 | 3307191.643| 3400346.571| 3452527.786| 3460766.857| 3431042.5 | 3440722.286|

And if we add the bufapi part, i.e., all the series:

1 | 16 | 32 | 64 | 128 | 256 | 512 | 1024
2257970.769| 3151268.385| 3260150.538| 3379383.846| 3424028.846| 3433384.308| 3385635.231| 3406554.538

For easier treatment, all in the same table:

1 | 16 | 32 | 64 | 128 | 256 | 512 | 1024
------------+-------------+-------------+-------------+-------------+-------------+------------+------------
2293304.308 | 3396057.769 | 3540860.615 | 3636056.077 | 3332950.846 | 3694276.154 | 3689820 |
2286723.857 | 3307191.643 | 3400346.571 | 3452527.786 | 3460766.857 | 3431042.5 | 3440722.286|
2257970.769 | 3151268.385 | 3260150.538 | 3379383.846 | 3424028.846 | 3433384.308 | 3385635.231| 3406554.538

> > # Rx
> > # ==

The rx tests are done with pktgen injecting packets in tap interface, and testpmd in rxonly forward mode. Again, each
column is a different value of VHOST_NET_BATCH, and each row is base, +batching, and +buf_api:

> > # pktgen results (pps)

(Didn't record extreme cases like >512 bufs batching)

1 | 16 | 32 | 64 | 128 | 256 | 512
-------+--------+--------+--------+--------+--------+--------
1223275| 1668868| 1728794| 1769261| 1808574| 1837252| 1846436
1456924| 1797901| 1831234| 1868746| 1877508| 1931598| 1936402
1368923| 1719716| 1794373| 1865170| 1884803| 1916021| 1975160

> > # Testpmd pps results

1 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048
------------+------------+------------+-----------+-----------+------------+------------+------------+---------
1222698.143 | 1670604 | 1731040.6 | 1769218 | 1811206 | 1839308.75 | 1848478.75 |
1450140.5 | 1799985.75 | 1834089.75 | 1871290 | 1880005.5 | 1934147.25 | 1939034 |
1370621 | 1721858 | 1796287.75 | 1866618.5 | 1885466.5 | 1918670.75 | 1976173.5 | 1988760.75 | 1978316

The last extreme cases (>512 bufs batched) were recorded just for the bufapi case.

Does that make sense now?

Thanks!

\
 
 \ /
  Last update: 2020-07-20 13:18    [W:0.115 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site