lkml.org 
[lkml]   [2020]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 7/7] drivers: thermal: tsens: add set_trip support for 8960
Hi Ansuel,

On Thu, Jul 16, 2020 at 7:58 AM Ansuel Smith <ansuelsmth@gmail.com> wrote:
>
> Add custom set_trip function for 8960 needed to set trip point to the
> tsens driver for 8960 driver.

Please describe why it needs a custom function please.

>
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
> drivers/thermal/qcom/tsens-8960.c | 78 +++++++++++++++++++++++++++++++
> 1 file changed, 78 insertions(+)
>
> diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
> index 20d0bfb10f1f..4ad65ab3fd18 100644
> --- a/drivers/thermal/qcom/tsens-8960.c
> +++ b/drivers/thermal/qcom/tsens-8960.c
> @@ -93,6 +93,15 @@
> TSENS_8064_SENSOR9_EN | \
> TSENS_8064_SENSOR10_EN)
>
> +/* Trips: from very hot to very cold */
> +enum tsens_trip_type {
> + TSENS_TRIP_STAGE3 = 0,
> + TSENS_TRIP_STAGE2,
> + TSENS_TRIP_STAGE1,
> + TSENS_TRIP_STAGE0,
> + TSENS_TRIP_NUM,
> +};
> +
> u32 tsens_8960_slope[] = {
> 1176, 1176, 1154, 1176,
> 1111, 1132, 1132, 1199,
> @@ -110,6 +119,16 @@ static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s)
> return adc_code * slope + offset;
> }
>
> +static int mdegC_to_code(int degC, const struct tsens_sensor *s)
> +{
> + int slope, offset;
> +
> + slope = thermal_zone_get_slope(s->tzd);
> + offset = CAL_MDEGC - slope * s->offset;
> +
> + return degC / slope - offset;
> +}
> +
> static void notify_uspace_tsens_fn(struct work_struct *work)
> {
> struct tsens_sensor *s = container_of(work, struct tsens_sensor,
> @@ -448,6 +467,64 @@ static int get_temp_8960(const struct tsens_sensor *s, int *temp)
> return -ETIMEDOUT;
> }
>
> +static int set_trip_temp_ipq8064(void *data, int trip, int temp)
> +{
> + unsigned int reg_th, reg_cntl;
> + int ret, code, code_chk, hi_code, lo_code;
> + const struct tsens_sensor *s = data;
> + struct tsens_priv *priv = s->priv;
> +
> + code = mdegC_to_code(temp, s);
> + code_chk = code;
> +
> + if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE)
> + return -EINVAL;
> +
> + ret = regmap_read(priv->tm_map, STATUS_CNTL_ADDR_8064, &reg_cntl);
> + if (ret)
> + return ret;
> +
> + ret = regmap_read(priv->tm_map, THRESHOLD_ADDR, &reg_th);
> + if (ret)
> + return ret;
> +
> + hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK)
> + >> THRESHOLD_UPPER_LIMIT_SHIFT;
> + lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK)
> + >> THRESHOLD_LOWER_LIMIT_SHIFT;
> +
> + switch (trip) {
> + case TSENS_TRIP_STAGE3:
> + code <<= THRESHOLD_MAX_LIMIT_SHIFT;
> + reg_th &= ~THRESHOLD_MAX_LIMIT_MASK;
> + break;
> + case TSENS_TRIP_STAGE2:
> + if (code_chk <= lo_code)
> + return -EINVAL;
> + code <<= THRESHOLD_UPPER_LIMIT_SHIFT;
> + reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK;
> + break;
> + case TSENS_TRIP_STAGE1:
> + if (code_chk >= hi_code)
> + return -EINVAL;
> + code <<= THRESHOLD_LOWER_LIMIT_SHIFT;
> + reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK;
> + break;
> + case TSENS_TRIP_STAGE0:
> + code <<= THRESHOLD_MIN_LIMIT_SHIFT;
> + reg_th &= ~THRESHOLD_MIN_LIMIT_MASK;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + ret = regmap_write(priv->tm_map, THRESHOLD_ADDR, reg_th | code);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> static const struct tsens_ops ops_8960 = {
> .init = init_8960,
> .calibrate = calibrate_8960,
> @@ -456,6 +533,7 @@ static const struct tsens_ops ops_8960 = {
> .disable = disable_8960,
> .suspend = suspend_8960,
> .resume = resume_8960,
> + .set_trip_temp = set_trip_temp_ipq8064,
> };
>
> struct tsens_plat_data data_8960 = {
> --
> 2.27.0
>

\
 
 \ /
  Last update: 2020-07-20 11:52    [W:1.629 / U:0.884 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site