lkml.org 
[lkml]   [2020]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 04/21] dt-binding: mediatek: Add binding for mt8192 IOMMU and SMI
On Sat, Jul 11, 2020 at 02:48:29PM +0800, Yong Wu wrote:
> This patch adds decriptions for mt8192 IOMMU and SMI.
>
> mt8192 also is MTK IOMMU gen2 which uses ARM Short-Descriptor translation
> table format. The M4U-SMI HW diagram is as below:
>
> EMI
> |
> M4U
> |
> ------------
> SMI Common
> ------------
> |
> +-------+------+------+----------------------+-------+
> | | | | ...... | |
> | | | | | |
> larb0 larb1 larb2 larb4 ...... larb19 larb20
> disp0 disp1 mdp vdec IPE IPE
>
> All the connections are HW fixed, SW can NOT adjust it.
>
> mt8192 M4U support 0~16GB iova range. we preassign different engines
> into different iova ranges:
>
> domain-id module iova-range larbs
> 0 disp 0 ~ 4G larb0/1
> 1 vcodec 4G ~ 8G larb4/5/7
> 2 cam/mdp 8G ~ 12G larb2/9/11/13/14/16/17/18/19/20
> 3 CCU0 0x4000_0000 ~ 0x43ff_ffff larb13: port 9/10
> 4 CCU1 0x4400_0000 ~ 0x47ff_ffff larb14: port 4/5

You probably want to use dma-ranges for defining these
address restrictions.

How is the domain-id used or needed?

Rob

\
 
 \ /
  Last update: 2020-07-21 01:17    [W:0.199 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site