lkml.org 
[lkml]   [2020]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.7 109/244] ARM: dts: Fix dcan driver probe failed on am437x platform
Date
From: dillon min <dillon.minfei@gmail.com>

[ Upstream commit 2a4117df9b436a0e4c79d211284ab2097bcd00dc ]

Got following d_can probe errors with kernel 5.8-rc1 on am437x

[ 10.730822] CAN device driver interface
Starting Wait for Network to be Configured...
[ OK ] Reached target Network.
[ 10.787363] c_can_platform 481cc000.can: probe failed
[ 10.792484] c_can_platform: probe of 481cc000.can failed with error -2
[ 10.799457] c_can_platform 481d0000.can: probe failed
[ 10.804617] c_can_platform: probe of 481d0000.can failed with error -2

actually, Tony has fixed this issue on am335x with the patch [3]

Since am437x has the same clock structure with am335x
[1][2], so reuse the code from Tony Lindgren's patch [3] to fix it.

[1]: https://www.ti.com/lit/pdf/spruh73 Chapter-23, Figure 23-1. DCAN
Integration
[2]: https://www.ti.com/lit/pdf/spruhl7 Chapter-25, Figure 25-1. DCAN
Integration
[3]: commit 516f1117d0fb ("ARM: dts: Configure osc clock for d_can on
am335x")

Fixes: 1a5cd7c23cc5 ("bus: ti-sysc: Enable all clocks directly during init to read revision")
Signed-off-by: dillon min <dillon.minfei@gmail.com>
[tony@atomide.com: aligned commit message a bit for readability]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/am437x-l4.dtsi | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
index 49c6a872052e4..e30089e96263a 100644
--- a/arch/arm/boot/dts/am437x-l4.dtsi
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -1544,8 +1544,9 @@ target-module@cc000 { /* 0x481cc000, ap 50 46.0 */
reg = <0xcc020 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
- clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>;
- clock-names = "fck";
+ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+ <&dcan0_fck>;
+ clock-names = "fck", "osc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xcc000 0x2000>;
@@ -1553,6 +1554,8 @@ target-module@cc000 { /* 0x481cc000, ap 50 46.0 */
dcan0: can@0 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
reg = <0x0 0x2000>;
+ clocks = <&dcan0_fck>;
+ clock-names = "fck";
syscon-raminit = <&scm_conf 0x644 0>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
@@ -1564,8 +1567,9 @@ target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */
reg = <0xd0020 0x4>;
reg-names = "rev";
/* Domains (P, C): per_pwrdm, l4ls_clkdm */
- clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>;
- clock-names = "fck";
+ clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+ <&dcan1_fck>;
+ clock-names = "fck", "osc";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0xd0000 0x2000>;
@@ -1573,6 +1577,8 @@ target-module@d0000 { /* 0x481d0000, ap 52 3a.0 */
dcan1: can@0 {
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
reg = <0x0 0x2000>;
+ clocks = <&dcan1_fck>;
+ clock-name = "fck";
syscon-raminit = <&scm_conf 0x644 1>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
--
2.25.1


\
 
 \ /
  Last update: 2020-07-20 18:20    [W:0.590 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site