lkml.org 
[lkml]   [2020]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [Freedreno] arm64: Internal error: Oops: qcom_iommu_tlb_inv_context free_io_pgtable_ops on db410c
On Mon, Jul 20, 2020 at 4:28 AM Robin Murphy <robin.murphy@arm.com> wrote:
>
> On 2020-07-20 08:17, Arnd Bergmann wrote:
> > On Mon, Jul 20, 2020 at 8:36 AM Naresh Kamboju
> > <naresh.kamboju@linaro.org> wrote:
> >>
> >> This kernel oops while boot linux mainline kernel on arm64 db410c device.
> >>
> >> metadata:
> >> git branch: master
> >> git repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> >> git commit: f8456690ba8eb18ea4714e68554e242a04f65cff
> >> git describe: v5.8-rc5-48-gf8456690ba8e
> >> make_kernelversion: 5.8.0-rc5
> >> kernel-config:
> >> https://builds.tuxbuild.com/2aLnwV7BLStU0t1R1QPwHQ/kernel.config
> >
> > Thanks for the report. Adding freedreno folks to Cc, as this may have something
> > to do with that driver.
> >
> >>
> >> [ 5.444121] Unable to handle kernel NULL pointer dereference at
> >> virtual address 0000000000000018
> >> [ 5.456615] ESR = 0x96000004
> >> [ 5.464471] SET = 0, FnV = 0
> >> [ 5.464487] EA = 0, S1PTW = 0
> >> [ 5.466521] Data abort info:
> >> [ 5.469971] ISV = 0, ISS = 0x00000004
> >> [ 5.472768] CM = 0, WnR = 0
> >> [ 5.476172] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000bacba000
> >> [ 5.479349] [0000000000000018] pgd=0000000000000000, p4d=0000000000000000
> >> [ 5.485820] Internal error: Oops: 96000004 [#1] PREEMPT SMP
> >> [ 5.492448] Modules linked in: crct10dif_ce adv7511(+)
> >> qcom_spmi_temp_alarm cec msm(+) mdt_loader qcom_camss videobuf2_dma_sg
> >> drm_kms_helper v4l2_fwnode videobuf2_memops videobuf2_v4l2 qcom_rng
> >> videobuf2_common i2c_qcom_cci display_connector socinfo drm qrtr ns
> >> rmtfs_mem fuse
> >> [ 5.500256] CPU: 0 PID: 286 Comm: systemd-udevd Not tainted 5.8.0-rc5 #1
> >> [ 5.522484] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
> >> [ 5.529170] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
> >> [ 5.535856] pc : qcom_iommu_tlb_inv_context+0x18/0xa8
> >> [ 5.541148] lr : free_io_pgtable_ops+0x28/0x58
> >> [ 5.546350] sp : ffff80001219b5f0
> >> [ 5.550689] x29: ffff80001219b5f0 x28: 0000000000000013
> >> [ 5.554078] x27: 0000000000000100 x26: ffff000036add3b8
> >> [ 5.559459] x25: ffff80000915e910 x24: ffff00003a5458c0
> >> [ 5.564753] x23: 0000000000000003 x22: ffff000036a37058
> >> [ 5.570049] x21: ffff000036a3a100 x20: ffff000036a3a480
> >> [ 5.575344] x19: ffff000036a37158 x18: 0000000000000000
> >> [ 5.580639] x17: 0000000000000000 x16: 0000000000000000
> >> [ 5.585935] x15: 0000000000000004 x14: 0000000000000368
> >> [ 5.591229] x13: 0000000000000000 x12: ffff000039c61798
> >> [ 5.596525] x11: ffff000039c616d0 x10: 0000000040000000
> >> [ 5.601820] x9 : 0000000000000000 x8 : ffff000039c616f8
> >> [ 5.607114] x7 : 0000000000000000 x6 : ffff000009f699a0
> >> [ 5.612410] x5 : ffff80001219b520 x4 : ffff000036a3a000
> >> [ 5.617705] x3 : ffff000009f69904 x2 : 0000000000000000
> >> [ 5.623001] x1 : ffff8000107e27e8 x0 : ffff00003a545810
> >> [ 5.628297] Call trace:
> >> [ 5.633592] qcom_iommu_tlb_inv_context+0x18/0xa8
> >
> > This means that dev_iommu_fwspec_get() has returned NULL
> > in qcom_iommu_tlb_inv_context(), either because dev->iommu
> > is NULL, or because dev->iommu->fwspec is NULL.
> >
> > qcom_iommu_tlb_inv_context() does not check for a NULL
> > pointer before using the returned object.
> >
> > The bug is either in the lack of error handling, or the fact
> > that it's possible to get into this function for a device
> > that has not been fully set up.
>
> Not quite - the device *was* properly set up, but has already been
> properly torn down again in the removal path by iommu_release_device().
> The problem is that qcom-iommu kept the device pointer as its TLB cookie
> for the domain, but the domain has a longer lifespan than the validity
> of that device - that's a fundamental design flaw in the driver.

fwiw, I just sent "iommu/qcom: Use domain rather than dev as tlb
cookie".. untested but looks like a straightforward enough change to
switch over to using the domain rather than dev as cookie

BR,
-R

>
> Robin.
>
> >> [ 5.635764] free_io_pgtable_ops+0x28/0x58
> >> [ 5.640624] qcom_iommu_domain_free+0x38/0x60
> >> [ 5.644617] iommu_group_release+0x4c/0x70
> >> [ 5.649045] kobject_put+0x6c/0x120
> >> [ 5.653035] kobject_del+0x64/0x90
> >> [ 5.656421] kobject_put+0xfc/0x120
> >> [ 5.659893] iommu_group_remove_device+0xdc/0xf0
> >> [ 5.663281] iommu_release_device+0x44/0x70
> >> [ 5.668142] iommu_bus_notifier+0xbc/0xd0
> >> [ 5.672048] notifier_call_chain+0x54/0x98
> >> [ 5.676214] blocking_notifier_call_chain+0x48/0x70
> >> [ 5.680209] device_del+0x26c/0x3a0
> >> [ 5.684981] platform_device_del.part.0+0x1c/0x88
> >> [ 5.688453] platform_device_unregister+0x24/0x40
> >> [ 5.693316] of_platform_device_destroy+0xe4/0xf8
> >> [ 5.698002] device_for_each_child+0x5c/0xa8
> >> [ 5.702689] of_platform_depopulate+0x3c/0x80
> >> [ 5.707144] msm_pdev_probe+0x1c4/0x308 [msm]
> >
> > It was triggered by a failure in msm_pdev_probe(), which was
> > calls of_platform_depopulate() in its error handling code.
> > This is a combination of two problems:
> >
> > a) Whatever caused msm_pdev_probe() to fail means that
> > the gpu won't be usable, though it should not have caused the
> > kernel to crash.
> >
> > b) the error handling itself causing additional problems due
> > to failed unwinding.
> >
> >> [ 5.711286] platform_drv_probe+0x54/0xa8
> >> [ 5.715624] really_probe+0xd8/0x320
> >> [ 5.719617] driver_probe_device+0x58/0xb8
> >> [ 5.723263] device_driver_attach+0x74/0x80
> >> [ 5.727168] __driver_attach+0x58/0xe0
> >> [ 5.731248] bus_for_each_dev+0x70/0xc0
> >> [ 5.735067] driver_attach+0x24/0x30
> >> [ 5.738801] bus_add_driver+0x14c/0x1f0
> >> [ 5.742619] driver_register+0x64/0x120
> >> [ 5.746178] __platform_driver_register+0x48/0x58
> >> [ 5.750099] msm_drm_register+0x58/0x70 [msm]
> >> [ 5.754861] do_one_initcall+0x54/0x1a0
> >> [ 5.759200] do_init_module+0x54/0x200
> >> [ 5.762846] load_module+0x1d1c/0x2300
> >> [ 5.766664] __do_sys_finit_module+0xd8/0xf0
> >> [ 5.770398] __arm64_sys_finit_module+0x20/0x30
> >> [ 5.774826] el0_svc_common.constprop.0+0x6c/0x168
> >> [ 5.779078] do_el0_svc+0x24/0x90
> >> [ 5.783939] el0_sync_handler+0x90/0x198
> >> [ 5.787323] el0_sync+0x158/0x180
> >> [ 5.791323] Code: 910003fd f9417404 b4000484 f9401482 (b9401846)
> >> [ 5.794532] ---[ end trace 3d6a53241629e560 ]---
> >>
> >> full crash log details.
> >> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.8-rc5-48-gf8456690ba8e/testrun/2945157/suite/linux-log-parser/test/check-kernel-oops-1573988/log
> >
> > There are a couple of messages directly preceding the bug output that are
> > probably relevant here:
> >
> > [ 5.259499] debugfs: Directory '1b0ac00.camss-vdda' with parent
> > 'smd:rpm:rpm-requests:pm8916-regulators-l2' already present!
> > Starting Resize root filesystem to fit available disk space...
> > Starting Start the WCN core...
> > [[0;32m OK [0m] Started Network Service.
> > [[0;32m OK [0m] Started QRTR service.
> > [ 5.352993] adreno 1c00000.gpu: Adding to iommu group 1
> > [ 5.357489] msm_mdp 1a01000.mdp: Adding to iommu group 2
> > [ 5.357757] msm_mdp 1a01000.mdp: No interconnect support may cause
> > display underflows!
> > [ 5.366215] adv7511 3-0039: supply dvdd not found, using dummy regulator
> > [ 5.378036] msm 1a00000.mdss: supply vdd not found, using dummy regulator
> > [ 5.378715] msm_mdp 1a01000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.6
> > [ 5.380549] adv7511 3-0039: supply pvdd not found, using dummy regulator
> > [ 5.384606] msm 1a00000.mdss: bound 1a01000.mdp (ops mdp5_ops [msm])
> > [ 5.394368] adv7511 3-0039: supply a2vdd not found, using dummy regulator
> > [ 5.397633] msm_dsi 1a98000.dsi: supply gdsc not found, using dummy regulator
> > [ 5.411897] msm_dsi 1a98000.dsi: supply gdsc not found, using dummy regulator
> > [ 5.420207] msm_dsi_manager_register: failed to register mipi dsi
> > host for DSI 0
> > [ 5.425717] platform 1a01000.mdp: Removing from iommu group 2
> > [[0;1;31mFAILED[0m] Failed to start Entropy Daemon based on the HAVEGE
> > algorithm.[ 5.444121] Unable to handle kernel NULL pointer
> > dereference at virtual address 0000000000000018
> >
> > See 'systemctl status haveged.service' for detai[ 5.456615] ESR =
> > 0x96000004
> > ls.
> > [ 5.464471] SET = 0, FnV = 0
> > [ 5.464487] EA = 0, S1PTW = 0
> >
> > Arnd
> > _______________________________________________
> > iommu mailing list
> > iommu@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/iommu
> >
> _______________________________________________
> Freedreno mailing list
> Freedreno@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/freedreno

\
 
 \ /
  Last update: 2020-07-20 17:58    [W:0.049 / U:20.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site