Messages in this thread Patch in this message |  | | From | Ondrej Jirman <> | Subject | [PATCH v3 1/4] dt-bindings: input: gpio-vibrator: Don't require enable-gpios | Date | Thu, 2 Jul 2020 13:20:38 +0200 |
| |
It is possible to turn the motor on/off just by enabling/disabling the vcc-supply. Change the binding to require either enable-gpios or vcc-supply or both.
Signed-off-by: Ondrej Jirman <megous@megous.com> --- Documentation/devicetree/bindings/input/gpio-vibrator.yaml | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml index 2384465eaa19..082ac06471db 100644 --- a/Documentation/devicetree/bindings/input/gpio-vibrator.yaml +++ b/Documentation/devicetree/bindings/input/gpio-vibrator.yaml @@ -24,7 +24,12 @@ properties: required: - compatible - - enable-gpios + +anyOf: + - required: + - enable-gpios + - required: + - vcc-supply additionalProperties: false -- 2.27.0
|  |