lkml.org 
[lkml]   [2020]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] dt-bindings: hwmon: adm1272: add adm1272-adm1275-temp1-en binding
On Sun, Jul 19, 2020 at 3:22 PM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On Fri, Jul 10, 2020 at 12:42:58AM +0000, Chu Lin wrote:
> > Problem:
> > adm1272 and adm1278 supports temperature sampling. The
> > current way of enabling it requires the user manually unbind the device
> > from the driver, flip the temperature sampling control bit and then bind
> > the device back to the driver. It would be nice if we can control this in a
> > better way by reading the dt.
> >
> > Solution:
> > Introducing device tree binding adm1272-adm1278-temp1-en. If the
> > flag is set, flip the temp1_en control bit on probing.
> >
> > Testing:
> > make dt_binding_check
> >
> > Signed-off-by: Chu Lin <linchuyuan@google.com>
> > ---
> > Documentation/devicetree/bindings/hwmon/adm1275.txt | 3 +++
> > 1 file changed, 3 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/hwmon/adm1275.txt b/Documentation/devicetree/bindings/hwmon/adm1275.txt
> > index 1ecd03f3da4d..4403fe30f005 100644
> > --- a/Documentation/devicetree/bindings/hwmon/adm1275.txt
> > +++ b/Documentation/devicetree/bindings/hwmon/adm1275.txt
> > @@ -15,6 +15,8 @@ Optional properties:
> >
> > - shunt-resistor-micro-ohms
> > Shunt resistor value in micro-Ohm
> > +- adm1272-adm1278-temp1-en
> > + Enable temperature sampling. This is supported on adm1272 and adm1278
>
> I suspect this should be something like "analog,temp1-enable". Either case,
> I would suggest to resend the series and copy DT maintainers at least on
> this patch.

Thanks for the heads up. I will send another review with a fix.

Thanks,
Chu

\
 
 \ /
  Last update: 2020-07-20 05:14    [W:0.058 / U:3.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site