lkml.org 
[lkml]   [2020]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 2/2] ASoC: qcom: sc7180: Add machine driver for sound card registration
On Fri, Jul 17, 2020 at 8:02 PM Cheng-Yi Chiang <cychiang@chromium.org> wrote:
> diff --git a/sound/soc/qcom/sc7180.c b/sound/soc/qcom/sc7180.c
> new file mode 100644
> index 000000000000..cbe6b487d432
> --- /dev/null
> +++ b/sound/soc/qcom/sc7180.c
> @@ -0,0 +1,410 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2020, The Linux Foundation. All rights reserved.
> + *
> + * sc7180.c -- ALSA SoC Machine driver for SC7180
> + */
Use "//" for all lines (see https://lkml.org/lkml/2020/5/14/332).

> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_device.h>
> +#include <sound/core.h>
> +#include <sound/pcm.h>
> +#include <sound/pcm_params.h>
> +#include <sound/jack.h>
> +#include <sound/soc.h>
> +#include <uapi/linux/input-event-codes.h>
> +#include <dt-bindings/sound/sc7180-lpass.h>
> +#include "../codecs/rt5682.h"
> +#include "common.h"
> +#include "lpass.h"
Insert a blank line in between <...> and "..." and sort the list
alphabetically to make it less likely to conflict.

> +static int sc7180_snd_hw_params(struct snd_pcm_substream *substream,
> + struct snd_pcm_hw_params *params)
> +{
Dummy function? Or is it still work in progress?

> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> + int ret = 0;
> +
> + switch (cpu_dai->id) {
> + case MI2S_PRIMARY:
> + break;
> + case MI2S_SECONDARY:
> + break;
> + default:
> + pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
-EINVAL.

> +static int sc7180_dai_init(struct snd_soc_pcm_runtime *rtd)
> +{
> + struct snd_soc_component *component;
> + struct snd_soc_card *card = rtd->card;
> + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> + struct sc7180_snd_data *pdata = snd_soc_card_get_drvdata(card);
> + struct snd_jack *jack;
> + int rval;
> +
> + if (!pdata->jack_setup) {
> + rval = snd_soc_card_jack_new(
> + card, "Headset Jack",
> + SND_JACK_HEADSET |
> + SND_JACK_HEADPHONE |
> + SND_JACK_BTN_0 | SND_JACK_BTN_1 |
> + SND_JACK_BTN_2 | SND_JACK_BTN_3,
> + &pdata->jack, NULL, 0);
> +
> + if (rval < 0) {
> + dev_err(card->dev, "Unable to add Headphone Jack\n");
> + return rval;
> + }
> +
> + jack = pdata->jack.jack;
> +
> + snd_jack_set_key(jack, SND_JACK_BTN_0, KEY_PLAYPAUSE);
> + snd_jack_set_key(jack, SND_JACK_BTN_1, KEY_VOICECOMMAND);
> + snd_jack_set_key(jack, SND_JACK_BTN_2, KEY_VOLUMEUP);
> + snd_jack_set_key(jack, SND_JACK_BTN_3, KEY_VOLUMEDOWN);
> + pdata->jack_setup = true;
This block is something I don't expect to be in "dai_init" (i.e. there
is only 1 headset jack, why do we need to run the code for n times).

> + switch (cpu_dai->id) {
> + case MI2S_PRIMARY:
> + jack = pdata->jack.jack;
> + component = codec_dai->component;
> +
> + jack->private_data = component;
> + jack->private_free = sc7180_jack_free;
> + rval = snd_soc_component_set_jack(component,
> + &pdata->jack, NULL);
> + if (rval != 0 && rval != -EOPNOTSUPP) {
> + dev_warn(card->dev, "Failed to set jack: %d\n", rval);
> + return rval;
> + }
> + break;
> + case MI2S_SECONDARY:
> + break;
> + default:
> + pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
-EINVAL.

> +static int sc7180_snd_startup(struct snd_pcm_substream *substream)
> +{
> + unsigned int codec_dai_fmt = SND_SOC_DAIFMT_CBS_CFS;
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> + struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
> + int ret;
> +
> + switch (cpu_dai->id) {
> + case MI2S_PRIMARY:
> + codec_dai_fmt |= SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_I2S;
If the format is fixed, could it put somewhere statically?

> + if (++data->pri_mi2s_clk_count == 1) {
Don't it need to be atomic?

> + snd_soc_dai_set_sysclk(cpu_dai,
> + LPASS_MCLK0,
> + DEFAULT_MCLK_RATE,
> + SNDRV_PCM_STREAM_PLAYBACK);
> + }
> + snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt);
> +
> + /* Configure PLL1 for codec */
> + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5682_PLL1_S_MCLK,
> + DEFAULT_MCLK_RATE, RT5682_PLL1_FREQ);
> + if (ret < 0) {
> + dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
> + return ret;
> + }
> +
> + /* Configure sysclk for codec */
> + ret = snd_soc_dai_set_sysclk(codec_dai, RT5682_SCLK_S_PLL1,
> + RT5682_PLL1_FREQ,
> + SND_SOC_CLOCK_IN);
> + if (ret < 0)
> + dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n",
> + ret);
> +
> + break;
> + case MI2S_SECONDARY:
> + break;
> + default:
> + pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
-EINVAL.

> +static void sc7180_snd_shutdown(struct snd_pcm_substream *substream)
> +{
> + struct snd_soc_pcm_runtime *rtd = substream->private_data;
> + struct snd_soc_card *card = rtd->card;
> + struct sc7180_snd_data *data = snd_soc_card_get_drvdata(card);
> + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0);
> +
> + switch (cpu_dai->id) {
> + case MI2S_PRIMARY:
> + if (--data->pri_mi2s_clk_count == 0) {
Atomic?

> + snd_soc_dai_set_sysclk(cpu_dai,
> + LPASS_MCLK0,
> + 0,
> + SNDRV_PCM_STREAM_PLAYBACK);
> + }
> + break;
> + case MI2S_SECONDARY:
> + break;
> + default:
> + pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
-EINVAL.

> +static int sc7180_snd_platform_probe(struct platform_device *pdev)
> +{
> + struct snd_soc_card *card;
> + struct sc7180_snd_data *data;
> + struct device *dev = &pdev->dev;
> + int ret;
> +
> + card = kzalloc(sizeof(*card), GFP_KERNEL);
> + if (!card)
> + return -ENOMEM;
Looks like you don't need to allocate the card in runtime. Also you
need to use the devm version if needed.

> + /* Allocate the private data */
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
Use devm.

> + card->dapm_widgets = sc7180_snd_widgets;
> + card->num_dapm_widgets = ARRAY_SIZE(sc7180_snd_widgets);
Can the struct snd_soc_card allocate statically?

> + sc7180_add_ops(card);
> + ret = snd_soc_register_card(card);
devm.


I didn't dive into the logic too much. Would need another round
review if any newer version.

\
 
 \ /
  Last update: 2020-07-20 04:48    [W:0.077 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site