lkml.org 
[lkml]   [2020]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 2/2] input: joystick: Add ADC attached joystick driver.
Date
Add a driver for joystick devices connected to ADC controllers
supporting the Industrial I/O subsystem.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---

Changes:

v2: - sanity check supported channel format on probe,
- rename adc_joystick_disable to a more sensible adc_joystick_cleanup,
- enforce correct axis order by checking the `reg` property of
child nodes

v3-v5: no change

v6: - remove redundant `<linux/of.h>`
- set `val` for each endianness case in their respective branches
- pass received error codes to return value of `adc_joystick_set_axes`
- change `(bits >> 3) > 2` to `bits > 16` for readability
- drop `of_match_ptr`

v7: no change

v8: - respect scan index when reading channel data,
- solve sparse warnings related to *_to_cpu calls,
- simplify channel count logic,
- drop the redundant comma from adc_joystick_of_match[]

drivers/input/joystick/Kconfig | 10 +
drivers/input/joystick/Makefile | 1 +
drivers/input/joystick/adc-joystick.c | 253 ++++++++++++++++++++++++++
3 files changed, 264 insertions(+)
create mode 100644 drivers/input/joystick/adc-joystick.c

diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig
index eb031b7a4866..b080f0cfb068 100644
--- a/drivers/input/joystick/Kconfig
+++ b/drivers/input/joystick/Kconfig
@@ -42,6 +42,16 @@ config JOYSTICK_A3D
To compile this driver as a module, choose M here: the
module will be called a3d.

+config JOYSTICK_ADC
+ tristate "Simple joystick connected over ADC"
+ depends on IIO
+ select IIO_BUFFER_CB
+ help
+ Say Y here if you have a simple joystick connected over ADC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adc-joystick.
+
config JOYSTICK_ADI
tristate "Logitech ADI digital joysticks and gamepads"
select GAMEPORT
diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile
index 8656023f6ef5..58232b3057d3 100644
--- a/drivers/input/joystick/Makefile
+++ b/drivers/input/joystick/Makefile
@@ -6,6 +6,7 @@
# Each configuration option enables a list of files.

obj-$(CONFIG_JOYSTICK_A3D) += a3d.o
+obj-$(CONFIG_JOYSTICK_ADC) += adc-joystick.o
obj-$(CONFIG_JOYSTICK_ADI) += adi.o
obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o
obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o
diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c
new file mode 100644
index 000000000000..a2c570de0b8a
--- /dev/null
+++ b/drivers/input/joystick/adc-joystick.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Input driver for joysticks connected over ADC.
+ * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu>
+ */
+#include <linux/ctype.h>
+#include <linux/input.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+struct adc_joystick_axis {
+ u32 code;
+ s32 range[2];
+ s32 fuzz;
+ s32 flat;
+};
+
+struct adc_joystick {
+ struct input_dev *input;
+ struct iio_cb_buffer *buffer;
+ struct adc_joystick_axis *axes;
+ struct iio_channel *chans;
+ int num_chans;
+};
+
+static int adc_joystick_handle(const void *data, void *private)
+{
+ struct adc_joystick *joy = private;
+ enum iio_endian endianness;
+ int bytes, msb, val, idx, i;
+ bool sign;
+
+ bytes = joy->chans[0].channel->scan_type.storagebits >> 3;
+
+ for (i = 0; i < joy->num_chans; ++i) {
+ idx = joy->chans[i].channel->scan_index;
+ endianness = joy->chans[i].channel->scan_type.endianness;
+ msb = joy->chans[i].channel->scan_type.realbits - 1;
+ sign = (tolower(joy->chans[i].channel->scan_type.sign) == 's');
+
+ switch (bytes) {
+ case 1:
+ val = ((const u8 *)data)[idx];
+ break;
+ case 2:
+ if (endianness == IIO_BE)
+ val = be16_to_cpu(((const __be16 *)data)[idx]);
+ else if (endianness == IIO_LE)
+ val = le16_to_cpu(((const __le16 *)data)[idx]);
+ else /* IIO_CPU */
+ val = ((const u16 *)data)[idx];
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val >>= joy->chans[i].channel->scan_type.shift;
+ if (sign)
+ val = sign_extend32(val, msb);
+ else
+ val &= GENMASK(msb, 0);
+ input_report_abs(joy->input, joy->axes[i].code, val);
+ }
+
+ input_sync(joy->input);
+
+ return 0;
+}
+
+static int adc_joystick_open(struct input_dev *dev)
+{
+ struct adc_joystick *joy = input_get_drvdata(dev);
+ int ret;
+
+ ret = iio_channel_start_all_cb(joy->buffer);
+ if (ret)
+ dev_err(dev->dev.parent, "Unable to start callback buffer");
+
+ return ret;
+}
+
+static void adc_joystick_close(struct input_dev *dev)
+{
+ struct adc_joystick *joy = input_get_drvdata(dev);
+
+ iio_channel_stop_all_cb(joy->buffer);
+}
+
+static void adc_joystick_cleanup(void *data)
+{
+ iio_channel_release_all_cb(data);
+}
+
+static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy)
+{
+ struct adc_joystick_axis *axes;
+ struct fwnode_handle *child;
+ int num_axes, ret, i;
+
+ num_axes = device_get_child_node_count(dev);
+ if (!num_axes) {
+ dev_err(dev, "Unable to find child nodes");
+ return -EINVAL;
+ }
+
+ if (num_axes != joy->num_chans) {
+ dev_err(dev, "Got %d child nodes for %d channels",
+ num_axes, joy->num_chans);
+ return -EINVAL;
+ }
+
+ axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL);
+ if (!axes)
+ return -ENOMEM;
+
+ device_for_each_child_node(dev, child) {
+ ret = fwnode_property_read_u32(child, "reg", &i);
+ if (ret) {
+ dev_err(dev, "reg invalid or missing");
+ goto err;
+ }
+
+ if (i >= num_axes) {
+ ret = -EINVAL;
+ dev_err(dev, "No matching axis for reg %d", i);
+ goto err;
+ }
+
+ ret = fwnode_property_read_u32(child, "linux,code",
+ &axes[i].code);
+ if (ret) {
+ dev_err(dev, "linux,code invalid or missing");
+ goto err;
+ }
+
+ ret = fwnode_property_read_u32_array(child, "abs-range",
+ axes[i].range, 2);
+ if (ret) {
+ dev_err(dev, "abs-range invalid or missing");
+ goto err;
+ }
+
+ fwnode_property_read_u32(child, "abs-fuzz",
+ &axes[i].fuzz);
+ fwnode_property_read_u32(child, "abs-flat",
+ &axes[i].flat);
+
+ input_set_abs_params(joy->input, axes[i].code,
+ axes[i].range[0], axes[i].range[1],
+ axes[i].fuzz,
+ axes[i].flat);
+ input_set_capability(joy->input, EV_ABS, axes[i].code);
+ }
+
+ joy->axes = axes;
+
+ return 0;
+
+err:
+ fwnode_handle_put(child);
+ return ret;
+}
+
+static int adc_joystick_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct adc_joystick *joy;
+ struct input_dev *input;
+ int bits, ret, i;
+
+ joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL);
+ if (!joy)
+ return -ENOMEM;
+
+ joy->chans = devm_iio_channel_get_all(dev);
+ if (IS_ERR(joy->chans)) {
+ ret = PTR_ERR(joy->chans);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Unable to get IIO channels");
+ return ret;
+ }
+
+ /* Count how many channels we got. NULL terminated. */
+ for (i = 0; joy->chans[i].indio_dev; ++i) {
+ bits = joy->chans[i].channel->scan_type.storagebits;
+ if (!bits || (bits > 16)) {
+ dev_err(dev, "Unsupported channel storage size");
+ return -EINVAL;
+ }
+ if (bits != joy->chans[0].channel->scan_type.storagebits) {
+ dev_err(dev, "Channels must have equal storage size");
+ return -EINVAL;
+ }
+ }
+ joy->num_chans = i;
+
+ input = devm_input_allocate_device(dev);
+ if (!input) {
+ dev_err(dev, "Unable to allocate input device");
+ return -ENOMEM;
+ }
+
+ joy->input = input;
+ input->name = pdev->name;
+ input->id.bustype = BUS_HOST;
+ input->open = adc_joystick_open;
+ input->close = adc_joystick_close;
+
+ ret = adc_joystick_set_axes(dev, joy);
+ if (ret)
+ return ret;
+
+ input_set_drvdata(input, joy);
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(dev, "Unable to register input device: %d", ret);
+ return ret;
+ }
+
+ joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy);
+ if (IS_ERR(joy->buffer)) {
+ dev_err(dev, "Unable to allocate callback buffer");
+ return PTR_ERR(joy->buffer);
+ }
+
+ ret = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer);
+ if (ret)
+ dev_err(dev, "Unable to add action");
+
+ return ret;
+}
+
+static const struct of_device_id adc_joystick_of_match[] = {
+ { .compatible = "adc-joystick", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, adc_joystick_of_match);
+
+static struct platform_driver adc_joystick_driver = {
+ .driver = {
+ .name = "adc-joystick",
+ .of_match_table = adc_joystick_of_match,
+ },
+ .probe = adc_joystick_probe,
+};
+module_platform_driver(adc_joystick_driver);
+
+MODULE_DESCRIPTION("Input driver for joysticks connected over ADC");
+MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>");
+MODULE_LICENSE("GPL");
--
2.27.0
\
 
 \ /
  Last update: 2020-07-20 00:13    [W:0.084 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site