lkml.org 
[lkml]   [2020]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH for v5.9] video: fbdev: Replace HTTP links with HTTPS ones
Date
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
Continuing my work started at 93431e0607e5.
See also: git log --oneline '--author=Alexander A. Klimov <grandmaster@al2klimov.de>' v5.7..master
(Actually letting a shell for loop submit all this stuff for me.)

If there are any URLs to be removed completely
or at least not (just) HTTPSified:
Just clearly say so and I'll *undo my change*.
See also: https://lkml.org/lkml/2020/6/27/64

If there are any valid, but yet not changed URLs:
See: https://lkml.org/lkml/2020/6/26/837

If you apply the patch, please let me know.

Sorry again to all maintainers who complained about subject lines.
Now I realized that you want an actually perfect prefixes,
not just subsystem ones.
I tried my best...
And yes, *I could* (at least half-)automate it.
Impossible is nothing! :)


Documentation/fb/ep93xx-fb.rst | 2 +-
drivers/video/fbdev/Kconfig | 8 ++++----
drivers/video/fbdev/core/fbmon.c | 4 ++--
drivers/video/fbdev/ep93xx-fb.c | 2 +-
drivers/video/fbdev/grvga.c | 2 +-
drivers/video/fbdev/macfb.c | 2 +-
drivers/video/fbdev/metronomefb.c | 2 +-
drivers/video/fbdev/omap2/omapfb/dss/Kconfig | 4 ++--
drivers/video/fbdev/omap2/omapfb/dss/hdmi.h | 2 +-
drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c | 2 +-
drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c | 2 +-
drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h | 2 +-
drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h | 2 +-
drivers/video/fbdev/sa1100fb.c | 2 +-
14 files changed, 19 insertions(+), 19 deletions(-)

diff --git a/Documentation/fb/ep93xx-fb.rst b/Documentation/fb/ep93xx-fb.rst
index 6f7767926d1a..1dd67f4688c7 100644
--- a/Documentation/fb/ep93xx-fb.rst
+++ b/Documentation/fb/ep93xx-fb.rst
@@ -127,7 +127,7 @@ At least on the EP9315 there is a silicon bug which causes bit 27 of
the VIDSCRNPAGE (framebuffer physical offset) to be tied low. There is
an unofficial errata for this bug at::

- http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
+ https://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2

By default the EP93xx framebuffer driver checks if the allocated physical
address has bit 27 set. If it does, then the memory is freed and an
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 0f559aeaf469..f12e390941b8 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -844,7 +844,7 @@ config FB_OPENCORES
systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.

The source code and specification for the core is available at
- <http://opencores.org/project,vga_lcd>
+ <https://opencores.org/project,vga_lcd>

config FB_S1D13XXX
tristate "Epson S1D13XXX framebuffer support"
@@ -855,7 +855,7 @@ config FB_S1D13XXX
help
Support for S1D13XXX framebuffer device family (currently only
working with S1D13806). Product specs at
- <http://vdc.epson.com/>
+ <https://vdc.epson.com/>

config FB_ATMEL
tristate "AT91 LCD Controller support"
@@ -1213,7 +1213,7 @@ config FB_RADEON
don't need to choose this to run the Radeon in plain VGA mode.

There is a product page at
- http://products.amd.com/en-us/GraphicCardResult.aspx
+ https://products.amd.com/en-us/GraphicCardResult.aspx

config FB_RADEON_I2C
bool "DDC/I2C for ATI Radeon support"
@@ -1381,7 +1381,7 @@ config FB_SIS
help
This is the frame buffer device driver for the SiS 300, 315, 330
and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
- Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
+ Specs available at <https://www.sis.com> and <http://www.xgitech.com>.

To compile this driver as a module, choose M here; the module
will be called sisfb.
diff --git a/drivers/video/fbdev/core/fbmon.c b/drivers/video/fbdev/core/fbmon.c
index d62a1e43864e..1bf82dbc9e3c 100644
--- a/drivers/video/fbdev/core/fbmon.c
+++ b/drivers/video/fbdev/core/fbmon.c
@@ -19,7 +19,7 @@
* Generalized Timing Formula is derived from:
*
* GTF Spreadsheet by Andy Morrish (1/5/97)
- * available at http://www.vesa.org
+ * available at https://www.vesa.org
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
@@ -1201,7 +1201,7 @@ static void fb_timings_dclk(struct __fb_timings *timings)
* ignored and @var will be filled with the calculated timings.
*
* All calculations are based on the VESA GTF Spreadsheet
- * available at VESA's public ftp (http://www.vesa.org).
+ * available at VESA's public ftp (https://www.vesa.org).
*
* NOTES:
* The timings generated by the GTF will be different from VESA
diff --git a/drivers/video/fbdev/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c
index cda2ef337423..ba33b4dce0df 100644
--- a/drivers/video/fbdev/ep93xx-fb.c
+++ b/drivers/video/fbdev/ep93xx-fb.c
@@ -430,7 +430,7 @@ static int ep93xxfb_alloc_videomem(struct fb_info *info)
/*
* There is a bug in the ep93xx framebuffer which causes problems
* if bit 27 of the physical address is set.
- * See: http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
+ * See: https://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
* There does not seem to be any official errata for this, but I
* have confirmed the problem exists on my hardware (ep9315) at
* least.
diff --git a/drivers/video/fbdev/grvga.c b/drivers/video/fbdev/grvga.c
index 07dda03e0957..24818b276241 100644
--- a/drivers/video/fbdev/grvga.c
+++ b/drivers/video/fbdev/grvga.c
@@ -5,7 +5,7 @@
* 2011 (c) Aeroflex Gaisler AB
*
* Full documentation of the core can be found here:
- * http://www.gaisler.com/products/grlib/grip.pdf
+ * https://www.gaisler.com/products/grlib/grip.pdf
*
* Contributors: Kristoffer Glembo <kristoffer@gaisler.com>
*/
diff --git a/drivers/video/fbdev/macfb.c b/drivers/video/fbdev/macfb.c
index e05a97662ca8..312e35c9aa6c 100644
--- a/drivers/video/fbdev/macfb.c
+++ b/drivers/video/fbdev/macfb.c
@@ -478,7 +478,7 @@ static int macfb_setcolreg(unsigned regno, unsigned red, unsigned green,
break;
/*
* 24-bit colour almost doesn't exist on 68k Macs --
- * http://support.apple.com/kb/TA28634 (Old Article: 10992)
+ * https://support.apple.com/kb/TA28634 (Old Article: 10992)
*/
case 24:
case 32:
diff --git a/drivers/video/fbdev/metronomefb.c b/drivers/video/fbdev/metronomefb.c
index a42e2eceee48..952826557a0c 100644
--- a/drivers/video/fbdev/metronomefb.c
+++ b/drivers/video/fbdev/metronomefb.c
@@ -10,7 +10,7 @@
* Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
*
* This work was made possible by help and equipment support from E-Ink
- * Corporation. http://www.eink.com/
+ * Corporation. https://www.eink.com/
*
* This driver is written to be used with the Metronome display controller.
* It is intended to be architecture independent. A board specific driver
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/Kconfig b/drivers/video/fbdev/omap2/omapfb/dss/Kconfig
index 36b97fee2d57..cc81a19537d2 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/Kconfig
+++ b/drivers/video/fbdev/omap2/omapfb/dss/Kconfig
@@ -60,7 +60,7 @@ config FB_OMAP5_DSS_HDMI
select FB_OMAP2_DSS_HDMI_COMMON
help
HDMI Interface for OMAP5 and similar cores. This adds the High
- Definition Multimedia Interface. See http://www.hdmi.org/ for HDMI
+ Definition Multimedia Interface. See https://www.hdmi.org/ for HDMI
specification.

config FB_OMAP2_DSS_SDI
@@ -79,7 +79,7 @@ config FB_OMAP2_DSS_DSI
DSI is a high speed half-duplex serial interface between the host
processor and a peripheral, such as a display or a framebuffer chip.

- See http://www.mipi.org/ for DSI specifications.
+ See https://www.mipi.org/ for DSI specifications.

config FB_OMAP2_DSS_MIN_FCK_PER_PCK
int "Minimum FCK/PCK ratio (for scaling)"
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h b/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h
index b9d4480ecfad..9a7253355f6d 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi.h
@@ -2,7 +2,7 @@
/*
* HDMI driver definition for TI OMAP4 Processor.
*
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/
*/

#ifndef _HDMI_H
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c
index 7060ae56c062..63262ec06921 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4.c
@@ -1,7 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* HDMI interface DSS driver for TI's OMAP4 family of SoCs.
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/
* Authors: Yong Zhi
* Mythri pk <mythripk@ti.com>
*/
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c
index 6b79b52d5fad..7ca1803bf161 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.c
@@ -3,7 +3,7 @@
* ti_hdmi_4xxx_ip.c
*
* HDMI TI81xx, TI38xx, TI OMAP4 etc IP driver Library
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/
* Authors: Yong Zhi
* Mythri pk <mythripk@ti.com>
*/
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h
index f066d1f69132..b5c35277f06e 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h
+++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi4_core.h
@@ -2,7 +2,7 @@
/*
* HDMI header definition for OMAP4 HDMI core IP
*
- * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2010-2011 Texas Instruments Incorporated - https://www.ti.com/
*/

#ifndef _HDMI4_CORE_H_
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h
index f10b8a283011..192c9b6e2f7b 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h
+++ b/drivers/video/fbdev/omap2/omapfb/dss/hdmi5_core.h
@@ -2,7 +2,7 @@
/*
* HDMI driver definition for TI OMAP5 processors.
*
- * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - https://www.ti.com/
*/

#ifndef _HDMI5_CORE_H_
diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 3e6e13f7a831..bda6cc313c8b 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
@@ -18,7 +18,7 @@
* Clean patches should be sent to the ARM Linux Patch System. Please see the
* following web page for more information:
*
- * http://www.arm.linux.org.uk/developer/patches/info.shtml
+ * https://www.arm.linux.org.uk/developer/patches/info.shtml
*
* Thank you.
*
--
2.27.0
\
 
 \ /
  Last update: 2020-07-19 22:38    [W:0.057 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site