lkml.org 
[lkml]   [2020]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 06/15] iommu/vt-d: Support setting ioasid set to domain
From
Date
Yi,

On 7/12/20 1:21 PM, Liu Yi L wrote:
> From IOMMU p.o.v., PASIDs allocated and managed by external components
> (e.g. VFIO) will be passed in for gpasid_bind/unbind operation. IOMMU
> needs some knowledge to check the PASID ownership, hence add an interface
> for those components to tell the PASID owner.
>
> In latest kernel design, PASID ownership is managed by IOASID set where
> the PASID is allocated from. This patch adds support for setting ioasid
> set ID to the domains used for nesting/vSVA. Subsequent SVA operations
> on the PASID will be checked against its IOASID set for proper ownership.
Subsequent SVA operations will check the PASID against its IOASID set
for proper ownership.
>
> Cc: Kevin Tian <kevin.tian@intel.com>
> CC: Jacob Pan <jacob.jun.pan@linux.intel.com>
> Cc: Alex Williamson <alex.williamson@redhat.com>
> Cc: Eric Auger <eric.auger@redhat.com>
> Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
> Cc: Joerg Roedel <joro@8bytes.org>
> Cc: Lu Baolu <baolu.lu@linux.intel.com>
> Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
> ---
> v4 -> v5:
> *) address comments from Eric Auger.
> ---
> drivers/iommu/intel/iommu.c | 22 ++++++++++++++++++++++
> include/linux/intel-iommu.h | 4 ++++
> include/linux/iommu.h | 1 +
> 3 files changed, 27 insertions(+)
>
> diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
> index 72ae6a2..4d54198 100644
> --- a/drivers/iommu/intel/iommu.c
> +++ b/drivers/iommu/intel/iommu.c
> @@ -1793,6 +1793,7 @@ static struct dmar_domain *alloc_domain(int flags)
> if (first_level_by_default())
> domain->flags |= DOMAIN_FLAG_USE_FIRST_LEVEL;
> domain->has_iotlb_device = false;
> + domain->ioasid_sid = INVALID_IOASID_SET;
> INIT_LIST_HEAD(&domain->devices);
>
> return domain;
> @@ -6039,6 +6040,27 @@ intel_iommu_domain_set_attr(struct iommu_domain *domain,
> }
> spin_unlock_irqrestore(&device_domain_lock, flags);
> break;
> + case DOMAIN_ATTR_IOASID_SID:
> + {
> + int sid = *(int *)data;
> +
> + if (!(dmar_domain->flags & DOMAIN_FLAG_NESTING_MODE)) {
> + ret = -ENODEV;
> + break;
> + }
> + spin_lock_irqsave(&device_domain_lock, flags);
I think the lock should be taken before the DOMAIN_FLAG_NESTING_MODE
check. Otherwise, the flags can be theretically changed inbetween the
check and the test below?

Thanks

Eric
> + if (dmar_domain->ioasid_sid != INVALID_IOASID_SET &&
> + dmar_domain->ioasid_sid != sid) {
> + pr_warn_ratelimited("multi ioasid_set (%d:%d) setting",
> + dmar_domain->ioasid_sid, sid);
> + ret = -EBUSY;
> + spin_unlock_irqrestore(&device_domain_lock, flags);
> + break;
> + }
> + dmar_domain->ioasid_sid = sid;
> + spin_unlock_irqrestore(&device_domain_lock, flags);
> + break;
> + }
> default:
> ret = -EINVAL;
> break;
> diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
> index 3f23c26..0d0ab32 100644
> --- a/include/linux/intel-iommu.h
> +++ b/include/linux/intel-iommu.h
> @@ -549,6 +549,10 @@ struct dmar_domain {
> 2 == 1GiB, 3 == 512GiB, 4 == 1TiB */
> u64 max_addr; /* maximum mapped address */
>
> + int ioasid_sid; /*
> + * the ioasid set which tracks all
> + * PASIDs used by the domain.
> + */
> int default_pasid; /*
> * The default pasid used for non-SVM
> * traffic on mediated devices.
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 7ca9d48..e84a1d5 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -124,6 +124,7 @@ enum iommu_attr {
> DOMAIN_ATTR_FSL_PAMUV1,
> DOMAIN_ATTR_NESTING, /* two stages of translation */
> DOMAIN_ATTR_DMA_USE_FLUSH_QUEUE,
> + DOMAIN_ATTR_IOASID_SID,
> DOMAIN_ATTR_MAX,
> };
>
>

\
 
 \ /
  Last update: 2020-07-19 17:39    [W:0.760 / U:0.336 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site