lkml.org 
[lkml]   [2020]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] x86/idt: Make sure idt_table takes a whole page
From
On July 18, 2020 12:25:46 PM PDT, Andy Lutomirski <luto@amacapital.net> wrote:
>
>> On Jul 18, 2020, at 10:57 AM, hpa@zytor.com wrote:
>>
>> On July 9, 2020 3:33:55 AM PDT, Joerg Roedel <joro@8bytes.org>
>wrote:
>>> From: Joerg Roedel <jroedel@suse.de>
>>>
>>> On x86-32 the idt_table with 256 entries needs only 2048 bytes. It
>is
>>> page-aligned, but the end of the .bss..page_aligned section is not
>>> guaranteed to be page-aligned.
>>>
>>> As a result, symbols from other .bss sections may end up on the same
>>> 4k page as the idt_table, and will accidentially get mapped
>read-only
>>> during boot, causing unexpected page-faults when the kernel writes
>to
>>> them.
>>>
>>> Avoid this by making the idt_table 4kb in size even on x86-32. On
>>> x86-64 the idt_table is already 4kb large, so nothing changes there.
>>>
>>> Fixes: 3e77abda65b1c ("x86/idt: Consolidate idt functionality")
>>> Signed-off-by: Joerg Roedel <jroedel@suse.de>
>>> ---
>>> arch/x86/kernel/idt.c | 12 ++++++++++--
>>> 1 file changed, 10 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/arch/x86/kernel/idt.c b/arch/x86/kernel/idt.c
>>> index 0db21206f2f3..83e24f837127 100644
>>> --- a/arch/x86/kernel/idt.c
>>> +++ b/arch/x86/kernel/idt.c
>>> @@ -157,8 +157,13 @@ static const __initconst struct idt_data
>>> apic_idts[] = {
>>> #endif
>>> };
>>>
>>> -/* Must be page-aligned because the real IDT is used in the cpu
>entry
>>> area */
>>> -static gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
>>> +/*
>>> + * Must be page-aligned because the real IDT is used in the cpu
>entry
>>> area.
>>> + * Allocate more entries than needed so that idt_table takes a
>whole
>>> page, so it
>>> + * is safe to map the idt_table read-only and into the user-space
>>> page-table.
>>> + */
>>> +#define IDT_ENTRIES_ALLOCATED (PAGE_SIZE / sizeof(gate_desc))
>>> +static gate_desc idt_table[IDT_ENTRIES_ALLOCATED]
>__page_aligned_bss;
>>>
>>> struct desc_ptr idt_descr __ro_after_init = {
>>> .size = IDT_TABLE_SIZE - 1,
>>> @@ -335,6 +340,9 @@ void __init idt_setup_apic_and_irq_gates(void)
>>> idt_map_in_cea();
>>> load_idt(&idt_descr);
>>>
>>> + BUILD_BUG_ON(IDT_ENTRIES_ALLOCATED < IDT_ENTRIES);
>>> + BUILD_BUG_ON(sizeof(idt_table) != PAGE_SIZE);
>>> +
>>> /* Make the IDT table read only */
>>> set_memory_ro((unsigned long)&idt_table, 1);
>>>
>>
>> NAK... this isn't the right way to fix this and just really kicks the
>can down the road. The reason is that you aren't fixing the module that
>actually has a problem.
>>
>> The Right Way[TM] is to figure out which module(s) lack the proper
>alignment for this section. A script using objdump -h or readelf -SW
>running over the .o files looking for alignment less than 2**12 should
>spot the modules that are missing the proper .balign directives.
>
>I don’t see the problem. If we are going to treat an object as though
>it’s 4096 bytes, making C think it’s 4096 bytes seems entirely
>reasonable to me.
>
>> --
>
>> Sent from my Android device with K-9 Mail. Please excuse my brevity.

It isn't the object, it is its alignment. You can have an object page-aligned so it doesn't cross page boundaries.

The bigger issue, though, is that this means there are other object files which don't have the correct alignment directives, which means that this error can crop up again at any point. The really important thing here is that we fix the real problem.
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.

\
 
 \ /
  Last update: 2020-07-19 03:17    [W:0.061 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site