lkml.org 
[lkml]   [2020]   [Jul]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V1] arm64: dts: qcom: Add bandwidth votes for eMMC and SDcard
Date
From: Pradeep P V K <ppvk@codeaurora.org>

Add the bandwidth domain supporting performance state and
the corresponding OPP tables for the sdhc device on sc7180.

Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
---
This change is depends on the patch series
https://lkml.org/lkml/2020/6/30/1280
Also depends on documentation commit 557ed5f (Present on linux-next)
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 68f9894..d78a066 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -684,6 +684,9 @@
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
<&gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
+ interconnects = <&aggre1_noc MASTER_EMMC &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_EMMC_CFG>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&sdhc1_opp_table>;

@@ -704,11 +707,15 @@
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <100000 100000>;
+ opp-avg-kBps = <100000 50000>;
};

opp-384000000 {
opp-hz = /bits/ 64 <384000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
+ opp-peak-kBps = <600000 900000>;
+ opp-avg-kBps = <261438 300000>;
};
};
};
@@ -2476,6 +2483,10 @@
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
<&gcc GCC_SDCC2_AHB_CLK>;
clock-names = "core", "iface";
+
+ interconnects = <&aggre1_noc MASTER_SDCC_2 &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_SDCC_2>;
+ interconnect-names = "sdhc-ddr","cpu-sdhc";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&sdhc2_opp_table>;

@@ -2489,11 +2500,15 @@
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_low_svs>;
+ opp-peak-kBps = <160000 100000>;
+ opp-avg-kBps = <80000 50000>;
};

opp-202000000 {
opp-hz = /bits/ 64 <202000000>;
required-opps = <&rpmhpd_opp_svs_l1>;
+ opp-peak-kBps = <200000 120000>;
+ opp-avg-kBps = <100000 60000>;
};
};
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
\
 
 \ /
  Last update: 2020-07-18 08:35    [W:0.032 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site