lkml.org 
[lkml]   [2020]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] firmware: arm_scmi: Pass shmem address to SMCCC call
From
Date
On Thu, 2020-07-16 at 12:57 -0700, Florian Fainelli wrote:
>
> On 7/16/2020 7:13 AM, Daniele Alessandrelli wrote:
> > Hi Florian,
> >
> > Thanks for you feedback.
> >
> > On Wed, 2020-07-15 at 15:43 -0700, Florian Fainelli wrote:
> > > On 7/15/2020 9:55 AM, Daniele Alessandrelli wrote:
> > > > From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> > > >
> > > > Currently, when SMC/HVC is used as transport, the base address
> > > > of
> > > > the
> > > > shared memory used for communication is not passed to the SMCCC
> > > > call.
> > > > This means that such an address must be hard-coded into the
> > > > bootloader.
> > > >
> > > > In order to increase flexibility and allow the memory layout to
> > > > be
> > > > changed without modifying the bootloader, this patch adds the
> > > > shared
> > > > memory base address to the a1 argument of the SMCCC call.
> > > >
> > > > On the Secure Monitor side, the service call implementation can
> > > > therefore read the a1 argument in order to know the location of
> > > > the
> > > > shared memory to use. This change is backward compatible to
> > > > existing
> > > > service call implementations as long as they don't check for a1
> > > > to
> > > > be
> > > > zero.
> > >
> > > resource_size_t being defined after phys_addr_t, its size is
> > > different
> > > between 32-bit, 32-bit with PAE and 64-bit so it would probably
> > > make
> > > more sense to define an physical address alignment, or maybe an
> > > address
> > > that is in multiple of 4KBytes so you can address up to 36-bits
> > > of
> > > physical address even on a 32-bit only system?
> >
> > I see your point. After a quick look, I think that, practically,
> > the
> > issue is with ARM32 LPAE addresses, for which phys_addr_t is a u64.
> > So,
> > basically, for AArch32 systems with LPAE the 64-bit shmem_paddr
> > gets
> > truncated to 32-bit when it's passed to the SMC32/HVC32 call.
> >
> > To solve that, I would prefer splitting the address between two SMC
> > parameters (a1 = addr_lo, a2 = addr_hi), instead of imposing an
> > arbitrary alignment. Would that be reasonable?
>
> The low/high part would only be relevant on a 32-bit LPAE platform
> which
> is probably a corner case, I would just pass the shmem_paddr / 4096
> since that is the smallest granule size and alignment possible and it
> still allows you to map up to 36-bits of physical address, which is
> the
> maximum that the long descriptor in LPAE can support. For 64-bit we
> have
> no such problems since we have the full register width.
>
> > > What discovery mechanism does the OS have that the specified
> > > address
> > > within the SMCCC call has been accepted by the firmware given the
> > > return
> > > value of that SMCCC call does not appear to be used or checked?
> > > Do we
> > > just expect a timeout initializing the SCMI subsystem?
> >
> > The return code is actually checked at the end of the function:
> > https://elixir.bootlin.com/linux/v5.8-rc4/source/drivers/firmware/arm_scmi/smc.c#L118
> >
> > But in the meantime scmi_rx_callback() has already been called. Not
> > sure if that's intentional or a possible bug.
> >
> > > Given that the kernel must somehow reserve this memory as a
> > > shared
> > > memory area for obvious reasons, and the trusted firmware must
> > > also
> > > ensure it treats this memory region with specific permissions in
> > > its
> > > translation regime, does it really make sense to give that much
> > > flexibility?
> >
> > Well, the trusted firmware might reserve a bigger region to be used
> > for
> > other service as well. In other words, the MMU of TF-A is not
> > necessary
> > specifically set up for this region, but, possibly, for a bigger
> > general shared region.
>
> But presumably the Linux shared memory area should be mapped in a
> slightly different way than
>
> > Passing the SCMI shmem to the SMC call allows the shmem to be moved
> > within such bigger shared memory without modifying the trusted
> > firmware.
> >
> > > If your boot loader has FDT patching capability, maybe it can
> > > also do
> > > a
> > > SMC call to provide the address to your trusted firmware, prior
> > > to
> > > loading the Linux kernel, and then they both agree, prior to boot
> > > about
> > > the shared memory address?
> >
> > Yes, that's a possible solution, but it looks more complicated to
> > me,
> > since it adds an additional component (the boot loader) to the
> > equation, while the goal of this patch was to reduce the coupling
> > between components (namely the DT/kernel and the trusted firmware).
> >
> > I guess my question is: if we fix the handling of LPAE addresses
> > and
> > the SMC return code, what is the drawback of having the shmem
> > address
> > passed to the SMC?
>
> My only concern is that if somehow Linux gets assigned a shared
> memory
> range that is completely outside of what the trusted firmware has
> already mapped, or is capable of addressing, or any combination
> thereof,
> it could be challenging to debug what is going on, especially if
> INVALID
> PARAMETER must not be returned (assuming this is to avoid Linux
> discovering where other shared memory areas pertaining to the
> firmware
> reside?).
>
> The other concern I have is that we are not documenting the various
> SMCCC calling conventions, soon enough it will be come out of
> control,
> and we are already allowing people to define their own function IDs
> and
> parameters to call into the trusted firmware. This sounds like
> something
> that is so basic that it should be standardized from the top, by ARM.

I agree. Having this standardized by ARM is probably what we really
need.

>
> > Anyway, I should have mentioned this in the commit message (sorry
> > for
> > not doing so), but I submitted this patch because initial feedback
> > from
> > Sudeep was positive [1]; but if there is no consensus around it I'm
> > fine with dropping it.
> >
> > [1] https://lore.kernel.org/lkml/20200710075931.GB1189@bogus/
>
> My review is by no means authoritative however in deploying SCMI on
> our
> Broadcom STB platforms some experience was gained in the process
> which
> is how it piqued my interest. Thanks for providing more background to
> this patch, this does help.

Just to clarify, your review is very welcome and much appreciated.
Indeed, feedback from engineers with previous experience like yours is
really helpful. With the link above I didn't mean to dismiss your
feedback, but only to provide some background / context.

>
> We have opted for a solution where the boot loader knows about all
> possible reserved regions prior to booting/loading the trusted
> firmware
> as well as the kernel, therefore it can pass that information to both
> and we never really had a situation where the two need to evolve in
> an
> uncoordinated way.

\
 
 \ /
  Last update: 2020-07-17 16:43    [W:0.088 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site