lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH v2] ASoC: cros_ec_codec: Reset I2S RX when probing
On Thu, Jul 16, 2020 at 10:09 AM Yu-Hsuan Hsu <yuhsuan@chromium.org> wrote:
>
> It is not guaranteed that I2S RX is disabled when the kernel booting.
> For example, if the kernel crashes while it is enabled, it will keep
> enabled until the next time EC reboots. Reset I2S RX when probing to
> fix this issue.
>
> Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
> ---
> drivers/platform/chrome/cros_ec_proto.c | 7 ++++++-
> include/linux/platform_data/cros_ec_commands.h | 1 +
> sound/soc/codecs/cros_ec_codec.c | 9 +++++++++
> 3 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
> index 3e745e0fe092c..2c60690d7147c 100644
> --- a/drivers/platform/chrome/cros_ec_proto.c
> +++ b/drivers/platform/chrome/cros_ec_proto.c
> @@ -572,7 +572,12 @@ int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> return -ENOTSUPP;
> } else if (msg->result != EC_RES_SUCCESS) {
> dev_dbg(ec_dev->dev, "Command result (err: %d)\n", msg->result);
> - return -EPROTO;
> + switch (msg->result) {
> + case EC_RES_INVALID_PARAM:
> + return -EINVAL;

As we have learned, this may impact other callers of
cros_ec_cmd_xfer_status() which only accept -EPROTO as error return
value. In addition to that, the code is odd:

if (msg->result == EC_RES_INVALID_VERSION) {
...
} else if (msg->result != EC_RES_SUCCESS) {
switch (msg->result) {
....
}
}

I really dislike the notion of changing error return values of
cros_ec_cmd_xfer_status() one by one. That can only cause ongoing
trouble with callers expecting specific error return codes (as we have
already seen).

Guenter

> + default:
> + return -EPROTO;
> + }
> }
>
> return ret;
> diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
> index 69210881ebac8..11ce917ca924c 100644
> --- a/include/linux/platform_data/cros_ec_commands.h
> +++ b/include/linux/platform_data/cros_ec_commands.h
> @@ -4598,6 +4598,7 @@ enum ec_codec_i2s_rx_subcmd {
> EC_CODEC_I2S_RX_SET_SAMPLE_DEPTH = 0x2,
> EC_CODEC_I2S_RX_SET_DAIFMT = 0x3,
> EC_CODEC_I2S_RX_SET_BCLK = 0x4,
> + EC_CODEC_I2S_RX_RESET = 0x5,
> EC_CODEC_I2S_RX_SUBCMD_COUNT,
> };
>
> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
> index f23956cf4ed84..b5ff30b7f1aa8 100644
> --- a/sound/soc/codecs/cros_ec_codec.c
> +++ b/sound/soc/codecs/cros_ec_codec.c
> @@ -1034,6 +1034,15 @@ static int cros_ec_codec_platform_probe(struct platform_device *pdev)
> }
> priv->ec_capabilities = r.capabilities;
>
> + /* Reset EC codec I2S RX. */
> + p.cmd = EC_CODEC_I2S_RX_RESET;
> + ret = send_ec_host_command(priv->ec_device, EC_CMD_EC_CODEC_I2S_RX,
> + (uint8_t *)&p, sizeof(p), NULL, 0);
> + if (ret == -EINVAL)
> + dev_info(dev, "Missing reset command. Please update your EC firmware.\n");
> + else if (ret)
> + dev_err(dev, "failed to EC_CODEC_I2S_RESET: %d\n", ret);
> +
> platform_set_drvdata(pdev, priv);
>
> ret = devm_snd_soc_register_component(dev, &i2s_rx_component_driver,
> --
> 2.27.0.389.gc38d7665816-goog
>

\
 
 \ /
  Last update: 2020-07-16 19:24    [W:0.061 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site