lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 02/20] arm64: dts: renesas: r8a774e1: Add PCIe device nodes
Date
Add PCIe{0,1} device nodes for R8A774E1 SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
---
arch/arm64/boot/dts/renesas/r8a774e1.dtsi | 47 ++++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 001874af8cf2..5805541b7882 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1517,12 +1517,57 @@
};

pciec0: pcie@fe000000 {
+ compatible = "renesas,pcie-r8a774e1",
+ "renesas,pcie-rcar-gen3";
reg = <0 0xfe000000 0 0x80000>;
#address-cells = <3>;
#size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>,
+ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>,
+ <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>,
+ <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 319>;
status = "disabled";
+ };

- /* placeholder */
+ pciec1: pcie@ee800000 {
+ compatible = "renesas,pcie-r8a774e1",
+ "renesas,pcie-rcar-gen3";
+ reg = <0 0xee800000 0 0x80000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ bus-range = <0x00 0xff>;
+ device_type = "pci";
+ ranges = <0x01000000 0 0x00000000 0 0xee900000 0 0x00100000>,
+ <0x02000000 0 0xeea00000 0 0xeea00000 0 0x00200000>,
+ <0x02000000 0 0xc0000000 0 0xc0000000 0 0x08000000>,
+ <0x42000000 0 0xc8000000 0 0xc8000000 0 0x08000000>;
+ /* Map all possible DDR as inbound ranges */
+ dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>;
+ clock-names = "pcie", "pcie_bus";
+ power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
+ resets = <&cpg 318>;
+ status = "disabled";
};

hdmi0: hdmi@fead0000 {
--
2.17.1
\
 
 \ /
  Last update: 2020-07-16 19:19    [W:0.576 / U:26.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site