lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[RESEND PATCH v2 0/2] Adding USB dual-role switching support for colibri-imx6/7 with extcon
Date
Hi Shawn,

This is a friendly reminder as I think the two patches in this patchset
got forgotten to pull back in.

Ahmad pointed out that extcon is legacy and I should better use the new
gpio-usb-b-connector compatible for that purpose. You removed those two
patches upon this recommendation.

In the meantime it turned out that I cannot use the new usb-connector
way of switching usb dual-role. This is due to Chipidea driver not
supporting it and Ahmad is fine using extcon for it.

I would be glad if you could pull those two patches back in.

Thanks,
Philippe


Philippe Schenker (2):
ARM: dts: colibri-imx6: add usb dual-role switch capability
ARM: dts: colibri-imx7: add usb dual-role switch capability

arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts | 8 ++++++++
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 2 +-
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 9 +++++++++
arch/arm/boot/dts/imx7-colibri.dtsi | 4 ++--
4 files changed, 20 insertions(+), 3 deletions(-)

--
2.27.0

\
 
 \ /
  Last update: 2020-07-16 14:58    [W:0.048 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site