lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patches in this message
/
From
Date
SubjectRE: [PATCH 16/24] scsi: megaraid: Fix a whole bunch of function header formatting issues
Acked-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>

-----Original Message-----
From: linux-scsi-owner@vger.kernel.org <linux-scsi-owner@vger.kernel.org>
On Behalf Of Lee Jones
Sent: Thursday, July 9, 2020 10:46 AM
To: jejb@linux.ibm.com; martin.petersen@oracle.com;
linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org; Lee Jones <lee.jones@linaro.org>;
Kashyap Desai <kashyap.desai@broadcom.com>; Sumit Saxena
<sumit.saxena@broadcom.com>; Shivasharan S
<shivasharan.srikanteshwara@broadcom.com>; Christoph Hellwig <hch@lst.de>;
Seokmann.Ju@lsil.com; sju@lsil.com; megaraidlinux.pdl@broadcom.com
Subject: [PATCH 16/24] scsi: megaraid: Fix a whole bunch of function
header formatting issues

Plus a couple of API catch-ups.

Fixes the following W=1 kernel build warning(s):

drivers/scsi/megaraid.c:133: warning: Function parameter or member
'adapter' not described in 'mega_setup_mailbox'
drivers/scsi/megaraid.c:356: warning: Function parameter or member
'adapter' not described in 'mega_runpendq'
drivers/scsi/megaraid.c:424: warning: Function parameter or member
'adapter' not described in 'mega_allocate_scb'
drivers/scsi/megaraid.c:424: warning: Function parameter or member 'cmd'
not described in 'mega_allocate_scb'
drivers/scsi/megaraid.c:456: warning: Function parameter or member
'adapter' not described in 'mega_get_ldrv_num'
drivers/scsi/megaraid.c:456: warning: Function parameter or member 'cmd'
not described in 'mega_get_ldrv_num'
drivers/scsi/megaraid.c:456: warning: Function parameter or member
'channel' not described in 'mega_get_ldrv_num'
drivers/scsi/megaraid.c:519: warning: Function parameter or member
'adapter' not described in 'mega_build_cmd'
drivers/scsi/megaraid.c:519: warning: Function parameter or member 'cmd'
not described in 'mega_build_cmd'
drivers/scsi/megaraid.c:519: warning: Function parameter or member 'busy'
not described in 'mega_build_cmd'
drivers/scsi/megaraid.c:951: warning: Function parameter or member
'adapter' not described in 'mega_prepare_passthru'
drivers/scsi/megaraid.c:951: warning: Function parameter or member 'scb'
not described in 'mega_prepare_passthru'
drivers/scsi/megaraid.c:951: warning: Function parameter or member 'cmd'
not described in 'mega_prepare_passthru'
drivers/scsi/megaraid.c:951: warning: Function parameter or member
'channel' not described in 'mega_prepare_passthru'
drivers/scsi/megaraid.c:951: warning: Function parameter or member
'target' not described in 'mega_prepare_passthru'
drivers/scsi/megaraid.c:1016: warning: Function parameter or member
'adapter' not described in 'mega_prepare_extpassthru'
drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'scb'
not described in 'mega_prepare_extpassthru'
drivers/scsi/megaraid.c:1016: warning: Function parameter or member 'cmd'
not described in 'mega_prepare_extpassthru'
drivers/scsi/megaraid.c:1016: warning: Function parameter or member
'channel' not described in 'mega_prepare_extpassthru'
drivers/scsi/megaraid.c:1016: warning: Function parameter or member
'target' not described in 'mega_prepare_extpassthru'
drivers/scsi/megaraid.c:1097: warning: Function parameter or member
'adapter' not described in 'issue_scb'
drivers/scsi/megaraid.c:1097: warning: Function parameter or member 'scb'
not described in 'issue_scb'
drivers/scsi/megaraid.c:1176: warning: Function parameter or member
'adapter' not described in 'issue_scb_block'
drivers/scsi/megaraid.c:1176: warning: Function parameter or member
'raw_mbox' not described in 'issue_scb_block'
drivers/scsi/megaraid.c:1259: warning: Function parameter or member 'irq'
not described in 'megaraid_isr_iomapped'
drivers/scsi/megaraid.c:1259: warning: Function parameter or member
'devp' not described in 'megaraid_isr_iomapped'
drivers/scsi/megaraid.c:1335: warning: Function parameter or member 'irq'
not described in 'megaraid_isr_memmapped'
drivers/scsi/megaraid.c:1335: warning: Function parameter or member
'devp' not described in 'megaraid_isr_memmapped'
drivers/scsi/megaraid.c:1413: warning: Function parameter or member
'adapter' not described in 'mega_cmd_done'
drivers/scsi/megaraid.c:1413: warning: Function parameter or member
'completed' not described in 'mega_cmd_done'
drivers/scsi/megaraid.c:1413: warning: Function parameter or member
'nstatus' not described in 'mega_cmd_done'
drivers/scsi/megaraid.c:1413: warning: Function parameter or member
'status' not described in 'mega_cmd_done'
drivers/scsi/megaraid.c:1933: warning: Function parameter or member
'adapter' not described in 'megaraid_abort_and_reset'
drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'cmd'
not described in 'megaraid_abort_and_reset'
drivers/scsi/megaraid.c:1933: warning: Function parameter or member 'aor'
not described in 'megaraid_abort_and_reset'
drivers/scsi/megaraid.c:2031: warning: Function parameter or member
'dma_handle' not described in 'mega_allocate_inquiry'
drivers/scsi/megaraid.c:2031: warning: Function parameter or member
'pdev' not described in 'mega_allocate_inquiry'
drivers/scsi/megaraid.c:2055: warning: Function parameter or member 'm'
not described in 'proc_show_config'
drivers/scsi/megaraid.c:2055: warning: Function parameter or member 'v'
not described in 'proc_show_config'
drivers/scsi/megaraid.c:2119: warning: Function parameter or member 'm'
not described in 'proc_show_stat'
drivers/scsi/megaraid.c:2119: warning: Function parameter or member 'v'
not described in 'proc_show_stat'
drivers/scsi/megaraid.c:2154: warning: Function parameter or member 'm'
not described in 'proc_show_mbox'
drivers/scsi/megaraid.c:2154: warning: Function parameter or member 'v'
not described in 'proc_show_mbox'
drivers/scsi/megaraid.c:2181: warning: Function parameter or member 'm'
not described in 'proc_show_rebuild_rate'
drivers/scsi/megaraid.c:2181: warning: Function parameter or member 'v'
not described in 'proc_show_rebuild_rate'
drivers/scsi/megaraid.c:2224: warning: Function parameter or member 'm'
not described in 'proc_show_battery'
drivers/scsi/megaraid.c:2224: warning: Function parameter or member 'v'
not described in 'proc_show_battery'
drivers/scsi/megaraid.c:2328: warning: Function parameter or member 'm'
not described in 'proc_show_pdrv'
drivers/scsi/megaraid.c:2328: warning: Function parameter or member
'adapter' not described in 'proc_show_pdrv'
drivers/scsi/megaraid.c:2328: warning: Function parameter or member
'channel' not described in 'proc_show_pdrv'
drivers/scsi/megaraid.c:2443: warning: Function parameter or member 'm'
not described in 'proc_show_pdrv_ch0'
drivers/scsi/megaraid.c:2443: warning: Function parameter or member 'v'
not described in 'proc_show_pdrv_ch0'
drivers/scsi/megaraid.c:2457: warning: Function parameter or member 'm'
not described in 'proc_show_pdrv_ch1'
drivers/scsi/megaraid.c:2457: warning: Function parameter or member 'v'
not described in 'proc_show_pdrv_ch1'
drivers/scsi/megaraid.c:2471: warning: Function parameter or member 'm'
not described in 'proc_show_pdrv_ch2'
drivers/scsi/megaraid.c:2471: warning: Function parameter or member 'v'
not described in 'proc_show_pdrv_ch2'
drivers/scsi/megaraid.c:2485: warning: Function parameter or member 'm'
not described in 'proc_show_pdrv_ch3'
drivers/scsi/megaraid.c:2485: warning: Function parameter or member 'v'
not described in 'proc_show_pdrv_ch3'
drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'm'
not described in 'proc_show_rdrv'
drivers/scsi/megaraid.c:2502: warning: Function parameter or member
'adapter' not described in 'proc_show_rdrv'
drivers/scsi/megaraid.c:2502: warning: Function parameter or member
'start' not described in 'proc_show_rdrv'
drivers/scsi/megaraid.c:2502: warning: Function parameter or member 'end'
not described in 'proc_show_rdrv'
drivers/scsi/megaraid.c:2684: warning: Function parameter or member 'm'
not described in 'proc_show_rdrv_10'
drivers/scsi/megaraid.c:2684: warning: Function parameter or member 'v'
not described in 'proc_show_rdrv_10'
drivers/scsi/megaraid.c:2698: warning: Function parameter or member 'm'
not described in 'proc_show_rdrv_20'
drivers/scsi/megaraid.c:2698: warning: Function parameter or member 'v'
not described in 'proc_show_rdrv_20'
drivers/scsi/megaraid.c:2712: warning: Function parameter or member 'm'
not described in 'proc_show_rdrv_30'
drivers/scsi/megaraid.c:2712: warning: Function parameter or member 'v'
not described in 'proc_show_rdrv_30'
drivers/scsi/megaraid.c:2726: warning: Function parameter or member 'm'
not described in 'proc_show_rdrv_40'
drivers/scsi/megaraid.c:2726: warning: Function parameter or member 'v'
not described in 'proc_show_rdrv_40'
drivers/scsi/megaraid.c:2739: warning: Function parameter or member
'index' not described in 'mega_create_proc_entry'
drivers/scsi/megaraid.c:2739: warning: Function parameter or member
'parent' not described in 'mega_create_proc_entry'
drivers/scsi/megaraid.c:2796: warning: Function parameter or member
'sdev' not described in 'megaraid_biosparam'
drivers/scsi/megaraid.c:2796: warning: Function parameter or member
'bdev' not described in 'megaraid_biosparam'
drivers/scsi/megaraid.c:2796: warning: Function parameter or member
'capacity' not described in 'megaraid_biosparam'
drivers/scsi/megaraid.c:2796: warning: Function parameter or member
'geom' not described in 'megaraid_biosparam'
drivers/scsi/megaraid.c:2865: warning: Function parameter or member
'adapter' not described in 'mega_init_scb'
drivers/scsi/megaraid.c:2945: warning: Function parameter or member
'inode' not described in 'megadev_open'
drivers/scsi/megaraid.c:2945: warning: Function parameter or member
'filep' not described in 'megadev_open'
drivers/scsi/megaraid.c:2969: warning: Function parameter or member
'filep' not described in 'megadev_ioctl'
drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'cmd'
not described in 'megadev_ioctl'
drivers/scsi/megaraid.c:2969: warning: Function parameter or member 'arg'
not described in 'megadev_ioctl'
drivers/scsi/megaraid.c:3383: warning: Function parameter or member 'arg'
not described in 'mega_m_to_n'
drivers/scsi/megaraid.c:3383: warning: Function parameter or member
'uioc' not described in 'mega_m_to_n'
drivers/scsi/megaraid.c:3574: warning: Function parameter or member
'adapter' not described in 'mega_is_bios_enabled'
drivers/scsi/megaraid.c:3607: warning: Function parameter or member
'adapter' not described in 'mega_enum_raid_scsi'
drivers/scsi/megaraid.c:3661: warning: Function parameter or member
'adapter' not described in 'mega_get_boot_drv'
drivers/scsi/megaraid.c:3728: warning: Function parameter or member
'adapter' not described in 'mega_support_random_del'
drivers/scsi/megaraid.c:3757: warning: Function parameter or member
'adapter' not described in 'mega_support_ext_cdb'
drivers/scsi/megaraid.c:3787: warning: Function parameter or member
'adapter' not described in 'mega_del_logdrv'
drivers/scsi/megaraid.c:3787: warning: Function parameter or member
'logdrv' not described in 'mega_del_logdrv'
drivers/scsi/megaraid.c:3872: warning: Function parameter or member
'adapter' not described in 'mega_get_max_sgl'
drivers/scsi/megaraid.c:3917: warning: Function parameter or member
'adapter' not described in 'mega_support_cluster'
drivers/scsi/megaraid.c:3962: warning: Function parameter or member
'adapter' not described in 'mega_adapinq'
drivers/scsi/megaraid.c:3962: warning: Function parameter or member
'dma_handle' not described in 'mega_adapinq'
drivers/scsi/megaraid.c:4071: warning: Function parameter or member
'adapter' not described in 'mega_internal_command'
drivers/scsi/megaraid.c:4071: warning: Function parameter or member 'mc'
not described in 'mega_internal_command'
drivers/scsi/megaraid.c:4071: warning: Function parameter or member
'pthru' not described in 'mega_internal_command'

Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Seokmann.Ju@lsil.com
Cc: sju@lsil.com
Cc: megaraidlinux.pdl@broadcom.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/scsi/megaraid.c | 218 ++++++++++++++++++++--------------------
1 file changed, 109 insertions(+), 109 deletions(-)

diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index
f27ffd088c8ae..2d57836d1607f 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -124,7 +124,7 @@ static int trace_level;

/**
* mega_setup_mailbox()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Allocates a 8 byte aligned memory for the handshake mailbox.
*/
@@ -178,9 +178,9 @@ mega_setup_mailbox(adapter_t *adapter) }


-/*
+/**
* mega_query_adapter()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Issue the adapter inquiry commands to the controller and find out
* information and parameter about the devices attached @@ -347,7 +347,7
@@ mega_query_adapter(adapter_t *adapter)

/**
* mega_runpendq()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Runs through the list of pending requests.
*/
@@ -358,10 +358,10 @@ mega_runpendq(adapter_t *adapter)
__mega_runpendq(adapter);
}

-/*
+/**
* megaraid_queue()
- * @scmd - Issue this scsi command
- * @done - the callback hook into the scsi mid-layer
+ * @scmd: Issue this scsi command
+ * @done: the callback hook into the scsi mid-layer
*
* The command queuing entry point for the mid-layer.
*/
@@ -413,8 +413,8 @@ static DEF_SCSI_QCMD(megaraid_queue)

/**
* mega_allocate_scb()
- * @adapter - pointer to our soft state
- * @cmd - scsi command from the mid-layer
+ * @adapter: pointer to our soft state
+ * @cmd: scsi command from the mid-layer
*
* Allocate a SCB structure. This is the central structure for controller
* commands.
@@ -444,9 +444,9 @@ mega_allocate_scb(adapter_t *adapter, struct scsi_cmnd
*cmd)

/**
* mega_get_ldrv_num()
- * @adapter - pointer to our soft state
- * @cmd - scsi mid layer command
- * @channel - channel on the controller
+ * @adapter: pointer to our soft state
+ * @cmd: scsi mid layer command
+ * @channel: channel on the controller
*
* Calculate the logical drive number based on the information in scsi
command
* and the channel number.
@@ -503,9 +503,9 @@ mega_get_ldrv_num(adapter_t *adapter, struct scsi_cmnd
*cmd, int channel)

/**
* mega_build_cmd()
- * @adapter - pointer to our soft state
- * @cmd - Prepare using this scsi command
- * @busy - busy flag if no resources
+ * @adapter: pointer to our soft state
+ * @cmd: Prepare using this scsi command
+ * @busy: busy flag if no resources
*
* Prepares a command and scatter gather list for the controller. This
routine
* also finds out if the commands is intended for a logical drive or a @@
-937,11 +937,11 @@ mega_build_cmd(adapter_t *adapter, struct scsi_cmnd
*cmd, int *busy)
/**
* mega_prepare_passthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
+ * @adapter: pointer to our soft state
+ * @scb: our scsi control block
+ * @cmd: scsi command from the mid-layer
+ * @channel: actual channel on the controller
+ * @target: actual id on the controller.
*
* prepare a command for the scsi physical devices.
*/
@@ -1000,11 +1000,11 @@ mega_prepare_passthru(adapter_t *adapter, scb_t
*scb, struct scsi_cmnd *cmd,

/**
* mega_prepare_extpassthru()
- * @adapter - pointer to our soft state
- * @scb - our scsi control block
- * @cmd - scsi command from the mid-layer
- * @channel - actual channel on the controller
- * @target - actual id on the controller.
+ * @adapter: pointer to our soft state
+ * @scb: our scsi control block
+ * @cmd: scsi command from the mid-layer
+ * @channel: actual channel on the controller
+ * @target: actual id on the controller.
*
* prepare a command for the scsi physical devices. This rountine
prepares
* commands for devices which can take extended CDBs (>10 bytes) @@
-1085,8 +1085,8 @@ __mega_runpendq(adapter_t *adapter)
/**
* issue_scb()
- * @adapter - pointer to our soft state
- * @scb - scsi control block
+ * @adapter: pointer to our soft state
+ * @scb: scsi control block
*
* Post a command to the card if the mailbox is available, otherwise
return
* busy. We also take the scb from the pending list if the mailbox is @@
-1166,8 +1166,8 @@ mega_busywait_mbox (adapter_t *adapter)
/**
* issue_scb_block()
- * @adapter - pointer to our soft state
- * @raw_mbox - the mailbox
+ * @adapter: pointer to our soft state
+ * @raw_mbox: the mailbox
*
* Issue a scb in synchronous and non-interrupt mode
*/
@@ -1247,8 +1247,8 @@ issue_scb_block(adapter_t *adapter, u_char
*raw_mbox)

/**
* megaraid_isr_iomapped()
- * @irq - irq
- * @devp - pointer to our soft state
+ * @irq: irq
+ * @devp: pointer to our soft state
*
* Interrupt service routine for io-mapped controllers.
* Find out if our device is interrupting. If yes, acknowledge the
interrupt @@ -1323,8 +1323,8 @@ megaraid_isr_iomapped(int irq, void *devp)

/**
* megaraid_isr_memmapped()
- * @irq - irq
- * @devp - pointer to our soft state
+ * @irq: irq
+ * @devp: pointer to our soft state
*
* Interrupt service routine for memory-mapped controllers.
* Find out if our device is interrupting. If yes, acknowledge the
interrupt @@ -1401,10 +1401,10 @@ megaraid_isr_memmapped(int irq, void
*devp) }
/**
* mega_cmd_done()
- * @adapter - pointer to our soft state
- * @completed - array of ids of completed commands
- * @nstatus - number of completed commands
- * @status - status of the last command completed
+ * @adapter: pointer to our soft state
+ * @completed: array of ids of completed commands
+ * @nstatus: number of completed commands
+ * @status: status of the last command completed
*
* Complete the commands and call the scsi mid-layer callback hooks.
*/
@@ -1921,9 +1921,9 @@ megaraid_reset(struct scsi_cmnd *cmd)

/**
* megaraid_abort_and_reset()
- * @adapter - megaraid soft state
- * @cmd - scsi command to be aborted or reset
- * @aor - abort or reset flag
+ * @adapter: megaraid soft state
+ * @cmd: scsi command to be aborted or reset
+ * @aor: abort or reset flag
*
* Try to locate the scsi command in the pending queue. If found and is
not
* issued to the controller, abort/reset it. Otherwise return failure @@
-2021,8 +2021,8 @@ free_local_pdev(struct pci_dev *pdev)
/**
* mega_allocate_inquiry()
- * @dma_handle - handle returned for dma address
- * @pdev - handle to pci device
+ * @dma_handle: handle returned for dma address
+ * @pdev: handle to pci device
*
* allocates memory for inquiry structure
*/
@@ -2045,8 +2045,8 @@ mega_free_inquiry(void *inquiry, dma_addr_t
dma_handle, struct pci_dev *pdev)

/**
* proc_show_config()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display configuration information about the controller.
*/
@@ -2109,8 +2109,8 @@ proc_show_config(struct seq_file *m, void *v)

/**
* proc_show_stat()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display statistical information about the I/O activity.
*/
@@ -2143,8 +2143,8 @@ proc_show_stat(struct seq_file *m, void *v)

/**
* proc_show_mbox()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display mailbox information for the last command issued. This
information
* is good for debugging.
@@ -2171,8 +2171,8 @@ proc_show_mbox(struct seq_file *m, void *v)

/**
* proc_show_rebuild_rate()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display current rebuild rate
*/
@@ -2214,8 +2214,8 @@ proc_show_rebuild_rate(struct seq_file *m, void *v)

/**
* proc_show_battery()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the battery module on the controller.
*/
@@ -2317,9 +2317,9 @@ mega_print_inquiry(struct seq_file *m, char
*scsi_inq)

/**
* proc_show_pdrv()
- * @m - Synthetic file construction data
- * @page - buffer to write the data in
- * @adapter - pointer to our soft state
+ * @m: Synthetic file construction data
+ * @adapter: pointer to our soft state
+ * @channel: channel on the controller
*
* Display information about the physical drives.
*/
@@ -2433,8 +2433,8 @@ proc_show_pdrv(struct seq_file *m, adapter_t
*adapter, int channel)

/**
* proc_show_pdrv_ch0()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the physical drives on physical channel 0.
*/
@@ -2447,8 +2447,8 @@ proc_show_pdrv_ch0(struct seq_file *m, void *v)

/**
* proc_show_pdrv_ch1()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the physical drives on physical channel 1.
*/
@@ -2461,8 +2461,8 @@ proc_show_pdrv_ch1(struct seq_file *m, void *v)

/**
* proc_show_pdrv_ch2()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the physical drives on physical channel 2.
*/
@@ -2475,8 +2475,8 @@ proc_show_pdrv_ch2(struct seq_file *m, void *v)

/**
* proc_show_pdrv_ch3()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display information about the physical drives on physical channel 3.
*/
@@ -2489,10 +2489,10 @@ proc_show_pdrv_ch3(struct seq_file *m, void *v)

/**
* proc_show_rdrv()
- * @m - Synthetic file construction data
- * @adapter - pointer to our soft state
- * @start - starting logical drive to display
- * @end - ending logical drive to display
+ * @m: Synthetic file construction data
+ * @adapter: pointer to our soft state
+ * @start: starting logical drive to display
+ * @end: ending logical drive to display
*
* We do not print the inquiry information since its already available
through
* /proc/scsi/scsi interface
@@ -2674,8 +2674,8 @@ proc_show_rdrv(struct seq_file *m, adapter_t
*adapter, int start, int end )

/**
* proc_show_rdrv_10()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display real time information about the logical drives 0 through 9.
*/
@@ -2688,8 +2688,8 @@ proc_show_rdrv_10(struct seq_file *m, void *v)

/**
* proc_show_rdrv_20()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display real time information about the logical drives 0 through 9.
*/
@@ -2702,8 +2702,8 @@ proc_show_rdrv_20(struct seq_file *m, void *v)

/**
* proc_show_rdrv_30()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display real time information about the logical drives 0 through 9.
*/
@@ -2716,8 +2716,8 @@ proc_show_rdrv_30(struct seq_file *m, void *v)

/**
* proc_show_rdrv_40()
- * @m - Synthetic file construction data
- * @v - File iterator
+ * @m: Synthetic file construction data
+ * @v: File iterator
*
* Display real time information about the logical drives 0 through 9.
*/
@@ -2729,8 +2729,8 @@ proc_show_rdrv_40(struct seq_file *m, void *v)

/**
* mega_create_proc_entry()
- * @index - index in soft state array
- * @parent - parent node for this /proc entry
+ * @index: index in soft state array
+ * @parent: parent node for this /proc entry
*
* Creates /proc entries for our controllers.
*/
@@ -2785,7 +2785,7 @@ static inline void mega_create_proc_entry(int index,
struct proc_dir_entry *pare #endif


-/**
+/*
* megaraid_biosparam()
*
* Return the disk geometry for a particular disk @@ -2854,7 +2854,7 @@
megaraid_biosparam(struct scsi_device *sdev, struct block_device *bdev,

/**
* mega_init_scb()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Allocate memory for the various pointers in the scb structures:
* scatter-gather list pointer, passthru and extended passthru structure
@@ -2934,8 +2934,8 @@ mega_init_scb(adapter_t *adapter)

/**
* megadev_open()
- * @inode - unused
- * @filep - unused
+ * @inode: unused
+ * @filep: unused
*
* Routines for the character/ioctl interface to the driver. Find out if
this
* is a valid open.
@@ -2954,10 +2954,9 @@ megadev_open (struct inode *inode, struct file
*filep)

/**
* megadev_ioctl()
- * @inode - Our device inode
- * @filep - unused
- * @cmd - ioctl command
- * @arg - user buffer
+ * @filep: unused
+ * @cmd: ioctl command
+ * @arg: user buffer
*
* ioctl entry point for our private ioctl interface. We move the data in
from
* the user space, prepare the command (if necessary, convert the old
MIMD @@ -3370,8 +3369,8 @@ megadev_unlocked_ioctl(struct file *filep,
unsigned int cmd, unsigned long arg)

/**
* mega_m_to_n()
- * @arg - user address
- * @uioc - new ioctl structure
+ * @arg: user address
+ * @uioc: new ioctl structure
*
* A thin layer to convert older mimd interface ioctl structure to NIT
ioctl
* structure
@@ -3496,10 +3495,10 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
return 0;
}

-/*
+/**
* mega_n_to_m()
- * @arg - user address
- * @mc - mailbox command
+ * @arg: user address
+ * @mc: mailbox command
*
* Updates the status information to the application, depending on
application
* conforms to older mimd ioctl interface or newer NIT ioctl interface @@
-3565,7 +3564,7 @@ mega_n_to_m(void __user *arg, megacmd_t *mc)
/**
* mega_is_bios_enabled()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* issue command to find out if the BIOS is enabled for this controller
*/
@@ -3596,7 +3595,7 @@ mega_is_bios_enabled(adapter_t *adapter)

/**
* mega_enum_raid_scsi()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out what channels are RAID/SCSI. This information is used to
* differentiate the virtual channels and physical channels and to
support @@ -3651,7 +3650,7 @@ mega_enum_raid_scsi(adapter_t *adapter)

/**
* mega_get_boot_drv()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out which device is the boot device. Note, any logical drive or
any
* phyical device (e.g., a CDROM) can be designated as a boot device.
@@ -3718,7 +3717,7 @@ mega_get_boot_drv(adapter_t *adapter)

/**
* mega_support_random_del()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out if this controller supports random deletion and addition of
* logical drives
@@ -3748,7 +3747,7 @@ mega_support_random_del(adapter_t *adapter)

/**
* mega_support_ext_cdb()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out if this firmware support cdblen > 10
*/
@@ -3776,8 +3775,8 @@ mega_support_ext_cdb(adapter_t *adapter)

/**
* mega_del_logdrv()
- * @adapter - pointer to our soft state
- * @logdrv - logical drive to be deleted
+ * @adapter: pointer to our soft state
+ * @logdrv: logical drive to be deleted
*
* Delete the specified logical drive. It is the responsibility of the
user
* app to let the OS know about this operation.
@@ -3862,7 +3861,7 @@ mega_do_del_logdrv(adapter_t *adapter, int logdrv)

/**
* mega_get_max_sgl()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out the maximum number of scatter-gather elements supported by
this
* version of the firmware
@@ -3908,7 +3907,7 @@ mega_get_max_sgl(adapter_t *adapter)

/**
* mega_support_cluster()
- * @adapter - pointer to our soft state
+ * @adapter: pointer to our soft state
*
* Find out if this firmware support cluster calls.
*/
@@ -3950,8 +3949,8 @@ mega_support_cluster(adapter_t *adapter) #ifdef
CONFIG_PROC_FS
/**
* mega_adapinq()
- * @adapter - pointer to our soft state
- * @dma_handle - DMA address of the buffer
+ * @adapter: pointer to our soft state
+ * @dma_handle: DMA address of the buffer
*
* Issue internal commands while interrupts are available.
* We only issue direct mailbox commands from within the driver. ioctl()
@@ -3983,11 +3982,12 @@ mega_adapinq(adapter_t *adapter, dma_addr_t
dma_handle) }


-/** mega_internal_dev_inquiry()
- * @adapter - pointer to our soft state
- * @ch - channel for this device
- * @tgt - ID of this device
- * @buf_dma_handle - DMA address of the buffer
+/**
+ * mega_internal_dev_inquiry()
+ * @adapter: pointer to our soft state
+ * @ch: channel for this device
+ * @tgt: ID of this device
+ * @buf_dma_handle: DMA address of the buffer
*
* Issue the scsi inquiry for the specified device.
*/
@@ -4056,9 +4056,9 @@ mega_internal_dev_inquiry(adapter_t *adapter, u8 ch,
u8 tgt,

/**
* mega_internal_command()
- * @adapter - pointer to our soft state
- * @mc - the mailbox command
- * @pthru - Passthru structure for DCDB commands
+ * @adapter: pointer to our soft state
+ * @mc: the mailbox command
+ * @pthru: Passthru structure for DCDB commands
*
* Issue the internal commands in interrupt mode.
* The last argument is the address of the passthru structure if the
command
--
2.25.1
\
 
 \ /
  Last update: 2020-07-16 07:44    [W:0.109 / U:0.288 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site