lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V4 0/7] Tegra XUSB charger detect support
On Fri, Jun 26, 2020 at 03:48:55PM +0530, Nagarjuna Kristam wrote:
> This patch series adds charger detect support on XUSB hardware used in
> Tegra210 and Tegra186 SoCs.
>
> This patchset is composed with :
> - dt bindings of XUSB Pad Controller
> - Tegra XUSB device mode driver to add vbus_draw support
> - Tegra PHY driver for charger detect support
>
> Tests done:
> - Connect USB cable from ubuntu host to micro-B port of DUT to detect
> SDP_TYPE charger
> - Connect USB cable from external powered USB hub(which inturn connects
> to ubuntu host) to micro-B port of DUT to detect CDP_TYPE charger.
> - Connect USB cable from USB charger to micro-B port of DUT to detect
> DCP_TYPE charger.
> DUT: Jetson-tx1, Jetson tx2.
>
> V4:
> - Added ACKed-by details for PHY driver.
> - Used BIT macro instead of (1 << index) usage as suggested by Chunfeng Yun.
> V3:
> - Added ACKed-by details for PHY driver and DT changes.
> - Functions and its arguments are aligned.
> - Tabs are used for alignment of MACRO's
> - For vbus_draw USDC callback, usb_phy set_power error is propogated.
> - Fixed various comments given by thierry.
> V2:
> - Added ACKed-by details for DT patches.
> - All patches rebased.
>
> Nagarjuna Kristam (7):
> dt-bindings: phy: tegra-xusb: Add charger-detect property
> phy: tegra: xusb: Add support for UTMI pad power control
> phy: tegra: xusb: Add USB2 pad power control support for Tegra210
> phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection
> phy: tegra: xusb: Add support for charger detect
> phy: tegra: xusb: Enable charger detect for Tegra186
> phy: tegra: xusb: Enable charger detect for Tegra210
>
> .../bindings/phy/nvidia,tegra124-xusb-padctl.txt | 4 +
> drivers/phy/tegra/Makefile | 2 +-
> drivers/phy/tegra/cd.c | 283 +++++++++++++++++++++
> drivers/phy/tegra/xusb-tegra186.c | 92 +++++--
> drivers/phy/tegra/xusb-tegra210.c | 223 +++++++++++-----
> drivers/phy/tegra/xusb.c | 80 ++++++
> drivers/phy/tegra/xusb.h | 22 ++
> 7 files changed, 621 insertions(+), 85 deletions(-)
> create mode 100644 drivers/phy/tegra/cd.c

Hi Kishon, Vinod,

did you have any further comments on this series or is it good to go
into v5.9?

Thanks,
Thierry
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2020-07-16 14:48    [W:0.089 / U:1.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site