lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 0/5] Add support for Ingenic X1830 SoC and Y&A CU1830-Neo board.
On Tue, Jul 14, 2020 at 01:32:24PM +0800, 周琰杰 (Zhou Yanjie) wrote:
> v3->v4:
> 1.Modify the commit message and add the change description
> for CU1000-Neo in patch [2/5].
> 2.The wrongly written "ingenic,x1000" in compatible is
> changed to "ingenic,x1000e" in "cu1000-neo.dts".
> 3.Adjust the order of nodes according to the corresponding
> address value for X1000.
> 4.Drop unnecessary node in "wlan_pwrseq" in "cu1000-neo.dts".
> 5.Add the leds node to "cu1000-neo.dts".
>
> 周琰杰 (Zhou Yanjie) (5):
> MIPS: Ingenic: Add Ingenic X1830 support.
> dt-bindings: MIPS: Add X1830 based CU1830-Neo and fix bug in
> CU1000-Neo.
> MIPS: Ingenic: Add YSH & ATIL CU Neo board support.
> MIPS: Ingenic: Fix bugs and add missing LED node for X1000.
> MIPS: CU1000-Neo: Refresh defconfig to support LED.
>
> .../devicetree/bindings/mips/ingenic/devices.yaml | 12 +-
> arch/mips/boot/dts/ingenic/Makefile | 1 +
> arch/mips/boot/dts/ingenic/cu1000-neo.dts | 114 ++++----
> arch/mips/boot/dts/ingenic/cu1830-neo.dts | 168 ++++++++++++
> arch/mips/boot/dts/ingenic/x1000.dtsi | 126 +++++----
> arch/mips/boot/dts/ingenic/x1830.dtsi | 300 +++++++++++++++++++++
> arch/mips/configs/cu1000-neo_defconfig | 4 +
> arch/mips/configs/cu1830-neo_defconfig | 123 +++++++++
> arch/mips/jz4740/Kconfig | 10 +
> 9 files changed, 733 insertions(+), 125 deletions(-)
> create mode 100644 arch/mips/boot/dts/ingenic/cu1830-neo.dts
> create mode 100644 arch/mips/boot/dts/ingenic/x1830.dtsi
> create mode 100644 arch/mips/configs/cu1830-neo_defconfig

series applied to mips-next.

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]

\
 
 \ /
  Last update: 2020-07-16 12:03    [W:0.046 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site