lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v2] powercap: Add Power Limit4 support
Date

> -----Original Message-----
> From: linux-pm-owner@vger.kernel.org <linux-pm-owner@vger.kernel.org>
> On Behalf Of Rafael J. Wysocki
> Sent: Tuesday, July 14, 2020 6:51 PM
> To: Pawnikar, Sumeet R <sumeet.r.pawnikar@intel.com>; Srinivas
> Pandruvada <srinivas.pandruvada@linux.intel.com>
> Cc: Rafael J. Wysocki <rjw@rjwysocki.net>; Zhang, Rui
> <rui.zhang@intel.com>; Linux PM <linux-pm@vger.kernel.org>; Linux Kernel
> Mailing List <linux-kernel@vger.kernel.org>; Shevchenko, Andriy
> <andriy.shevchenko@intel.com>
> Subject: Re: [PATCH v2] powercap: Add Power Limit4 support
>
> On Tue, Jul 14, 2020 at 10:22 AM Sumeet Pawnikar
> <sumeet.r.pawnikar@intel.com> wrote:
> >
> > Modern Intel Mobile platforms support power limit4 (PL4), which is the
> > SoC package level maximum power limit (in Watts). It can be used to
> > preemptively limits potential SoC power to prevent power spikes from
> > tripping the power adapter and battery over-current protection.
> > This patch enables this feature by exposing package level peak power
> > capping control to userspace via RAPL sysfs interface. With this,
> > application like DTPF can modify PL4 power limit, the similar way of
> > other package power limit (PL1).
> > As this feature is not tested on previous generations, here it is
> > enabled only for the platform that has been verified to work, for
> > safety concerns.
>
> Thanks for the better changelog!
>
> > Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
> > Signed-off-by: Zhang Rui <rui.zhang@intel.com>
>
> But why is the Rui's S-o-b under your patch?
>
> Is it there because Rui has contributed to the patch? If so, you should have
> used the Co-developed-by tag instead.
>

Sure, I will update this accordingly.

Thanks,
Sumeet.

> Srinivas, does the patch look good to you?
>
> > ---
> > Changes in v2:
> > - Addressed review comments from Rafael.
> > - Made the commit message more clearer.
> > - Updated powercap documentation.
> > ---
> > Documentation/power/powercap/powercap.rst | 14 +++++---
> > drivers/powercap/intel_rapl_common.c | 54
> +++++++++++++++++++++++++++--
> > drivers/powercap/intel_rapl_msr.c | 15 ++++++++
> > include/linux/intel_rapl.h | 5 ++-
> > 4 files changed, 80 insertions(+), 8 deletions(-)
> >
> > diff --git a/Documentation/power/powercap/powercap.rst
> > b/Documentation/power/powercap/powercap.rst
> > index 7ae3b44c7624..b3af059b6d5d 100644
> > --- a/Documentation/power/powercap/powercap.rst
> > +++ b/Documentation/power/powercap/powercap.rst
> > @@ -167,11 +167,12 @@ For example::
> > package-0
> > ---------
> >
> > -The Intel RAPL technology allows two constraints, short term and long
> > term, -with two different time windows to be applied to each power
> > zone. Thus for -each zone there are 2 attributes representing the
> > constraint names, 2 power -limits and 2 attributes representing the
> > sizes of the time windows. Such that,
> > -constraint_j_* attributes correspond to the jth constraint (j = 0,1).
> > +Depending on different power zones, the Intel RAPL technology allows
> > +one or multiple constraints like short term, long term and peak
> > +power, with different time windows to be applied to each power zone.
> > +All the zones contain attributes representing the constraint names,
> > +power limits and the sizes of the time windows. Such that,
> > +constraint_j_* attributes correspond to the jth constraint (j = 0,1,2).
> >
> > For example::
> >
> > @@ -181,6 +182,9 @@ For example::
> > constraint_1_name
> > constraint_1_power_limit_uw
> > constraint_1_time_window_us
> > + constraint_2_name
> > + constraint_2_power_limit_uw
> > + constraint_2_time_window_us
> >
> > Power Zone Attributes
> > =====================
> > diff --git a/drivers/powercap/intel_rapl_common.c
> > b/drivers/powercap/intel_rapl_common.c
> > index 61a63a16b5e7..a8bcc58d61f0 100644
> > --- a/drivers/powercap/intel_rapl_common.c
> > +++ b/drivers/powercap/intel_rapl_common.c
> > @@ -39,6 +39,8 @@
> > #define POWER_HIGH_LOCK BIT_ULL(63)
> > #define POWER_LOW_LOCK BIT(31)
> >
> > +#define POWER_LIMIT4_MASK 0x1FFF
> > +
> > #define TIME_WINDOW1_MASK (0x7FULL<<17)
> > #define TIME_WINDOW2_MASK (0x7FULL<<49)
> >
> > @@ -82,6 +84,7 @@ enum unit_type {
> >
> > static const char pl1_name[] = "long_term"; static const char
> > pl2_name[] = "short_term";
> > +static const char pl4_name[] = "peak_power";
> >
> > #define power_zone_to_rapl_domain(_zone) \
> > container_of(_zone, struct rapl_domain, power_zone) @@ -337,6
> > +340,9 @@ static int set_power_limit(struct powercap_zone *power_zone,
> int cid,
> > case PL2_ENABLE:
> > rapl_write_data_raw(rd, POWER_LIMIT2, power_limit);
> > break;
> > + case PL4_ENABLE:
> > + rapl_write_data_raw(rd, POWER_LIMIT4, power_limit);
> > + break;
> > default:
> > ret = -EINVAL;
> > }
> > @@ -371,6 +377,9 @@ static int get_current_power_limit(struct
> powercap_zone *power_zone, int cid,
> > case PL2_ENABLE:
> > prim = POWER_LIMIT2;
> > break;
> > + case PL4_ENABLE:
> > + prim = POWER_LIMIT4;
> > + break;
> > default:
> > put_online_cpus();
> > return -EINVAL;
> > @@ -440,6 +449,13 @@ static int get_time_window(struct powercap_zone
> *power_zone, int cid,
> > case PL2_ENABLE:
> > ret = rapl_read_data_raw(rd, TIME_WINDOW2, true, &val);
> > break;
> > + case PL4_ENABLE:
> > + /*
> > + * Time window parameter is not applicable for PL4 entry
> > + * so assigining '0' as default value.
> > + */
> > + val = 0;
> > + break;
> > default:
> > put_online_cpus();
> > return -EINVAL;
> > @@ -483,6 +499,9 @@ static int get_max_power(struct powercap_zone
> *power_zone, int id, u64 *data)
> > case PL2_ENABLE:
> > prim = MAX_POWER;
> > break;
> > + case PL4_ENABLE:
> > + prim = MAX_POWER;
> > + break;
> > default:
> > put_online_cpus();
> > return -EINVAL;
> > @@ -492,6 +511,10 @@ static int get_max_power(struct powercap_zone
> *power_zone, int id, u64 *data)
> > else
> > *data = val;
> >
> > + /* As a generalization rule, PL4 would be around two times PL2. */
> > + if (rd->rpl[id].prim_id == PL4_ENABLE)
> > + *data = *data * 2;
> > +
> > put_online_cpus();
> >
> > return ret;
> > @@ -524,12 +547,22 @@ static void rapl_init_domains(struct rapl_package
> *rp)
> > rd->id = i;
> > rd->rpl[0].prim_id = PL1_ENABLE;
> > rd->rpl[0].name = pl1_name;
> > - /* some domain may support two power limits */
> > - if (rp->priv->limits[i] == 2) {
> > +
> > + /*
> > + * The PL2 power domain is applicable for limits two
> > + * and limits three
> > + */
> > + if (rp->priv->limits[i] >= 2) {
> > rd->rpl[1].prim_id = PL2_ENABLE;
> > rd->rpl[1].name = pl2_name;
> > }
> >
> > + /* Enable PL4 domain if the total power limits are three */
> > + if (rp->priv->limits[i] == 3) {
> > + rd->rpl[2].prim_id = PL4_ENABLE;
> > + rd->rpl[2].name = pl4_name;
> > + }
> > +
> > for (j = 0; j < RAPL_DOMAIN_REG_MAX; j++)
> > rd->regs[j] = rp->priv->regs[i][j];
> >
> > @@ -587,6 +620,8 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd,
> enum unit_type type,
> > RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
> > PRIMITIVE_INFO_INIT(POWER_LIMIT2, POWER_LIMIT2_MASK, 32,
> > RAPL_DOMAIN_REG_LIMIT, POWER_UNIT, 0),
> > + PRIMITIVE_INFO_INIT(POWER_LIMIT4, POWER_LIMIT4_MASK, 0,
> > + RAPL_DOMAIN_REG_PL4, POWER_UNIT, 0),
> > PRIMITIVE_INFO_INIT(FW_LOCK, POWER_LOW_LOCK, 31,
> > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
> > PRIMITIVE_INFO_INIT(PL1_ENABLE, POWER_LIMIT1_ENABLE, 15, @@
> > -597,6 +632,8 @@ static u64 rapl_unit_xlate(struct rapl_domain *rd, enum
> unit_type type,
> > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
> > PRIMITIVE_INFO_INIT(PL2_CLAMP, POWER_LIMIT2_CLAMP, 48,
> > RAPL_DOMAIN_REG_LIMIT, ARBITRARY_UNIT, 0),
> > + PRIMITIVE_INFO_INIT(PL4_ENABLE, POWER_LIMIT4_MASK, 0,
> > + RAPL_DOMAIN_REG_PL4, ARBITRARY_UNIT,
> > + 0),
> > PRIMITIVE_INFO_INIT(TIME_WINDOW1, TIME_WINDOW1_MASK, 17,
> > RAPL_DOMAIN_REG_LIMIT, TIME_UNIT, 0),
> > PRIMITIVE_INFO_INIT(TIME_WINDOW2, TIME_WINDOW2_MASK, 49,
> @@
> > -1252,6 +1289,7 @@ void rapl_remove_package(struct rapl_package *rp)
> > if (find_nr_power_limit(rd) > 1) {
> > rapl_write_data_raw(rd, PL2_ENABLE, 0);
> > rapl_write_data_raw(rd, PL2_CLAMP, 0);
> > + rapl_write_data_raw(rd, PL4_ENABLE, 0);
> > }
> > if (rd->id == RAPL_DOMAIN_PACKAGE) {
> > rd_package = rd; @@ -1360,6 +1398,13 @@ static
> > void power_limit_state_save(void)
> > if (ret)
> > rd->rpl[i].last_power_limit = 0;
> > break;
> > + case PL4_ENABLE:
> > + ret = rapl_read_data_raw(rd,
> > + POWER_LIMIT4, true,
> > + &rd->rpl[i].last_power_limit);
> > + if (ret)
> > + rd->rpl[i].last_power_limit = 0;
> > + break;
> > }
> > }
> > }
> > @@ -1390,6 +1435,11 @@ static void power_limit_state_restore(void)
> > rapl_write_data_raw(rd, POWER_LIMIT2,
> > rd->rpl[i].last_power_limit);
> > break;
> > + case PL4_ENABLE:
> > + if (rd->rpl[i].last_power_limit)
> > + rapl_write_data_raw(rd, POWER_LIMIT4,
> > + rd->rpl[i].last_power_limit);
> > + break;
> > }
> > }
> > }
> > diff --git a/drivers/powercap/intel_rapl_msr.c
> > b/drivers/powercap/intel_rapl_msr.c
> > index d5487965bdfe..83c76454623e 100644
> > --- a/drivers/powercap/intel_rapl_msr.c
> > +++ b/drivers/powercap/intel_rapl_msr.c
> > @@ -28,6 +28,7 @@
> >
> > /* Local defines */
> > #define MSR_PLATFORM_POWER_LIMIT 0x0000065C
> > +#define MSR_VR_CURRENT_CONFIG 0x00000601
> >
> > /* private data for RAPL MSR Interface */ static struct rapl_if_priv
> > rapl_msr_priv = { @@ -123,13 +124,27 @@ static int
> > rapl_msr_write_raw(int cpu, struct reg_action *ra)
> > return ra->err;
> > }
> >
> > +/* List of verified CPUs. */
> > +static const struct x86_cpu_id pl4_support_ids[] = {
> > + { X86_VENDOR_INTEL, 6, INTEL_FAM6_TIGERLAKE_L,
> X86_FEATURE_ANY },
> > + {}
> > +};
> > +
> > static int rapl_msr_probe(struct platform_device *pdev) {
> > int ret;
> > + const struct x86_cpu_id *id = x86_match_cpu(pl4_support_ids);
> >
> > rapl_msr_priv.read_raw = rapl_msr_read_raw;
> > rapl_msr_priv.write_raw = rapl_msr_write_raw;
> >
> > + if (id) {
> > + rapl_msr_priv.limits[RAPL_DOMAIN_PACKAGE] = 3;
> > +
> rapl_msr_priv.regs[RAPL_DOMAIN_PACKAGE][RAPL_DOMAIN_REG_PL4] =
> > + MSR_VR_CURRENT_CONFIG;
> > + pr_info("PL4 support detected.\n");
> > + }
> > +
> > rapl_msr_priv.control_type = powercap_register_control_type(NULL,
> "intel-rapl", NULL);
> > if (IS_ERR(rapl_msr_priv.control_type)) {
> > pr_debug("failed to register powercap control_type.\n");
> > diff --git a/include/linux/intel_rapl.h b/include/linux/intel_rapl.h
> > index efb3ce892c20..3582176a1eca 100644
> > --- a/include/linux/intel_rapl.h
> > +++ b/include/linux/intel_rapl.h
> > @@ -29,6 +29,7 @@ enum rapl_domain_reg_id {
> > RAPL_DOMAIN_REG_PERF,
> > RAPL_DOMAIN_REG_POLICY,
> > RAPL_DOMAIN_REG_INFO,
> > + RAPL_DOMAIN_REG_PL4,
> > RAPL_DOMAIN_REG_MAX,
> > };
> >
> > @@ -38,12 +39,14 @@ enum rapl_primitives {
> > ENERGY_COUNTER,
> > POWER_LIMIT1,
> > POWER_LIMIT2,
> > + POWER_LIMIT4,
> > FW_LOCK,
> >
> > PL1_ENABLE, /* power limit 1, aka long term */
> > PL1_CLAMP, /* allow frequency to go below OS request */
> > PL2_ENABLE, /* power limit 2, aka short term, instantaneous */
> > PL2_CLAMP,
> > + PL4_ENABLE, /* power limit 4, aka max peak power */
> >
> > TIME_WINDOW1, /* long term */
> > TIME_WINDOW2, /* short term */
> > @@ -65,7 +68,7 @@ struct rapl_domain_data {
> > unsigned long timestamp;
> > };
> >
> > -#define NR_POWER_LIMITS (2)
> > +#define NR_POWER_LIMITS (3)
> > struct rapl_power_limit {
> > struct powercap_zone_constraint *constraint;
> > int prim_id; /* primitive ID used to enable */
> > --
> > 1.7.9.5
> >
\
 
 \ /
  Last update: 2020-07-16 07:06    [W:0.084 / U:0.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site