lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] dt-bindings: pinctrl: Add bindings for Actions S500 SoC
On Thu, Jul 16, 2020 at 08:50:36AM -0600, Rob Herring wrote:
> On Thu, Jul 16, 2020 at 4:43 AM Cristian Ciocaltea
> <cristian.ciocaltea@gmail.com> wrote:
> >
> > On Wed, Jul 15, 2020 at 02:03:09PM -0600, Rob Herring wrote:
> > > On Thu, Jun 25, 2020 at 11:16:18PM +0300, Cristian Ciocaltea wrote:
> > > > Add pinctrl and gpio bindings for Actions Semi S500 SoC.
> > > >
> > > > Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
> > > > ---
> > > > .../pinctrl/actions,s500-pinctrl.yaml | 228 ++++++++++++++++++
> > > > 1 file changed, 228 insertions(+)
> > > > create mode 100644 Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> > > > new file mode 100644
> > > > index 000000000000..856947c70844
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/pinctrl/actions,s500-pinctrl.yaml
> > > > @@ -0,0 +1,228 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/pinctrl/actions,s500-pinctrl.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Actions Semi S500 SoC pinmux & GPIO controller
> > > > +
> > > > +maintainers:
> > > > + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > > +
> > > > +description: |
> > > > + Pinmux & GPIO controller manages pin multiplexing & configuration including
> > > > + GPIO function selection & GPIO attributes configuration. Please refer to
> > > > + pinctrl-bindings.txt in this directory for common binding part and usage.
> > > > +
> > > > +properties:
> > > > + compatible:
> > > > + const: actions,s500-pinctrl
> > > > +
> > > > + reg:
> > > > + minItems: 1
> > > > + maxItems: 4
> > >
> > > Need to enumerate what each register range is.
> >
> > Hi Rob,
> >
> > Thanks for the review!
> >
> > Would the update below suffice?
> >
> > reg:
> > description: |
> > Specifies the memory region(s) associated with the pin-controller.
> > To improve granularity, up to four register ranges can be provided:
>
> What does 'improve granularity' mean:

Technically all the registers used by the driver could be specified via
a single contiguous range. However, there are a few unrelated registers
(i.e. PWM Output Control) which should be excluded in order to come up
with a more accurate specification. The 4 ranges below are basically
the result of this exclusion:

> > * GPIO Output + GPIO Input + GPIO Data
> > * Multiplexing Control
> > * PAD Pull Control + PAD Schmitt Trigger enable + PAD Control
> > * PAD Drive Capacity Select
>
> The h/w sometimes has these and sometimes doesn't?

No, the h/w is fixed, the only reason of this approach was to allow a
precise memory region specification, as explained above.

I'm not sure if this should be made mandatory or it's also fine to let
(a lazy) user provide combined ranges or just a contiguous one (like
in the example), with the drawback of loosing the accuracy, of course.

> If they do stay, then you want:
>
> items:
> - description: GPIO Output + GPIO Input + GPIO Data
> - description: ...

Would this be applicable even if we keep this flexible approach and
don't set 'minItems: 4'?

> >
> > > > +
> > > > + clocks:
> > > > + maxItems: 1
> > > > +
> > > > + gpio-controller: true
> > > > +
> > > > + gpio-ranges:
> > > > + maxItems: 1
> > > > +
> > > > + '#gpio-cells':
> > > > + description:
> > > > + Specifies the pin number and flags, as defined in
> > > > + include/dt-bindings/gpio/gpio.h
> > > > + const: 2
> > > > +
> > > > + interrupt-controller: true
> > > > +
> > > > + '#interrupt-cells':
> > > > + description:
> > > > + Specifies the pin number and flags, as defined in
> > > > + include/dt-bindings/interrupt-controller/irq.h
> > > > + const: 2
> > > > +
> > > > + interrupts:
> > > > + description:
> > > > + One interrupt per each of the 5 GPIO ports supported by the controller,
> > > > + sorted by port number ascending order.
> > > > + minItems: 5
> > > > + maxItems: 5
> > > > +
> > > > +patternProperties:
> > > > + '^.*$':
> > > > + if:
> > > > + type: object
> > >
> > > For a new binding, can you do '-pins$' for the node names so we don't
> > > need this if/then hack.
> >
> > Right, the idea was to be consistent with the existing bindings for
> > S700 and S900, which allow free node names, although they are not yet
> > converted to yaml format.
>
> If we want consistency, those should have their node names updated.

Fair enough, I have already updated the node names to use the '-pins'
suffix.

> >
> > > > + then:
> > > > + patternProperties:
> > > > + 'pinmux$':
> > >
> > > Is this really a pattern? Can't tell from the example.
> >
> > pinmux and pinconf subnodes may appear multiple times, that's why I
> > decided to match their names based on the suffix.
> >
> > The example is not complex enough, I will change it to the following:
> >
> > mmc0_default: mmc0_default {
> > pinmux {
> > groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
> > "sd0_cmd_mfp", "sd0_clk_mfp";
> > function = "sd0";
> > };
> >
> > drv_pinconf {
>
> drv-pinconf
>
> Make the pattern '-?pinconf' to enforce that. (that '-' may need escaping?)

Actually the pattern should be '^(.*-)?pinconf$', to restrict the names
to either 'pinconf' or '<label>-pinconf'.

I have just made some more validation tests and noticed I had missed an
'additionalProperties: false' line, for the 'pins' node. Should be fine
now!

Thanks,
Cristi

\
 
 \ /
  Last update: 2020-07-16 23:27    [W:0.051 / U:0.668 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site