lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v15 1/9] nvme-core: Clear any SGL flags in passthru commands
The host driver should decide whether to use SGLs or PRPs and they
currently assume the flags are cleared after the call to
nvme_setup_cmd(). However, passed-through commands may erroneously
set these bits; so clear them for all cases.

Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
---
drivers/nvme/host/core.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index f49085bcaa42..63a59186e68b 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -759,6 +759,8 @@ blk_status_t nvme_setup_cmd(struct nvme_ns *ns, struct request *req,
case REQ_OP_DRV_IN:
case REQ_OP_DRV_OUT:
memcpy(cmd, nvme_req(req)->cmd, sizeof(*cmd));
+ /* passthru commands should let the driver set the SGL flags */
+ cmd->common.flags &= ~NVME_CMD_SGL_ALL;
break;
case REQ_OP_FLUSH:
nvme_setup_flush(ns, cmd);
--
2.20.1
\
 
 \ /
  Last update: 2020-07-16 23:19    [W:0.153 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site