lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] usb: typec: intel_pmc_mux: Check the port status before connect
On Wed, Jul 15, 2020 at 05:33:10PM -0700, Rajmohan Mani wrote:
> From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
>
> The PMC microcontroller that we use for configuration, does
> not supply any status information back. For port status we
> need to talk to another controller on the board called IOM
> (I/O manager).
>
> By checking the port status before configuring the muxes, we
> can make sure that we do not reconfigure the port after
> bootup when the system firmware (for example BIOS) has
> already configured it.
>
> Using the status information also to check if DisplayPort
> HPD is still asserted when the cable plug is disconnected,
> and clearing it if it is.
>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

You can't just forward on patches from others without also adding your
signed-off-by to them, right?

Please fix up this series and try again.

thanks,

greg k-h

\
 
 \ /
  Last update: 2020-07-16 09:06    [W:2.315 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site