lkml.org 
[lkml]   [2020]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 4/8] dt-bindings: pinctrl: realtek: Add Realtek DHC SoC rtd1195
On Thu, Jul 16, 2020 at 10:33:34AM +0800, TY Chang wrote:
> Add device tree binding Documentation for rtd1195
> pinctrl driver.
>
> Signed-off-by: TY Chang <tychang@realtek.com>
> ---
> .../pinctrl/realtek,rtd1195-pinctrl.yaml | 104 ++++++++++++++++++
> 1 file changed, 104 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/realtek,rtd1195-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/realtek,rtd1195-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1195-pinctrl.yaml
> new file mode 100644
> index 000000000000..50a95bc46e2b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/realtek,rtd1195-pinctrl.yaml
> @@ -0,0 +1,104 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/realtek,rtd1195-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Realtek DHC RTD1195 pin control
> +
> +maintainers:
> + - Andreas Farber <afaerber@suse.de>
> +
> +properties:
> + compatible:
> + enum:
> + - realtek,rtd1195-iso-pinctrl
> + - realtek,rtd1195-crt-pinctrl
> + reg:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - reg
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> + '-pins$':
> + type: object
> + description:
> + Pinctrl node's client devices use subnodes for desired pin configuration.
> + Client device subnodes use below standard properties.
> + allOf:
> + - $ref: "/schemas/pinctrl/pincfg-node.yaml"
> +
> + properties:
> + groups:
> + items:
> + enum: [ iso_gpio_0, iso_gpio_1, usb0, usb1, vfd_cs_n,
> + vfd_clk, vfd_d, ir_rx, ir_tx, ur0_rx, ur0_tx,
> + ur1_rx, ur1_tx, ur1_cts_n, ur1_rts_n, i2c_scl_0,
> + i2c_sda_0, etn_led_link, etn_led_rxtx,
> + i2c_scl_6, i2c_sda_6, ai_loc, ejtag_avcpu_loc,
> + ur1_loc, pwm_01_open_drain, pwm_23_open_drain,
> + gpio_0, gpio_1, gpio_2, gpio_3, gpio_4, gpio_5,
> + gpio_6, gpio_7, gpio_8, nf_dd_0, nf_dd_1,
> + nf_dd_2, nf_dd_3, nf_dd_4, nf_dd_5, nf_dd_6,
> + nf_dd_7, nf_rdy, nf_rd_n, nf_wr_n, nf_ale,
> + nf_cle, nf_ce_n_0, nf_ce_n_1, mmc_data_0,
> + mmc_data_1, mmc_data_2, mmc_data_3, mmc_clk,
> + mmc_cmd, mmc_wp, mmc_cd, sdio_clk, sdio_data_0,
> + sdio_data_1, sdio_data_2, sdio_data_3, sdio_cmd,
> + i2c_scl_5, i2c_sda_5, tp1_data, tp1_clk,
> + tp1_valid, tp1_sync, tp0_data, tp0_clk,
> + tp0_valid, tp0_sync, usb_id, hdmi_hpd, spdif,
> + i2c_scl_1, i2c_sda_1, i2c_scl_4, i2c_sda_4,
> + sensor_cko_0, sensor_cko_1, sensor_rst,
> + sensor_stb_0, sensor_stb_1, ejtag_scpu_loc,
> + hif_loc, ao_loc ]
> + minItems: 1
> +
> + function:
> + enum: [ gpio, ai_ur1, ai_vfd, avcpu_ejtag_iso,
> + avcpu_ejtag_misc_loc, etn_led, i2c0, i2c2,
> + i2c3, i2c6, ir_rx, ir_tx, pwm, standby_dbg,
> + uart0, uart1, ur1_misc, vfd, pwm_01_normal,
> + pwm_23_normal, pwm_01_open_drain, pwm_23_open_drain,
> + ao_tp0, ao_gpio, avcpu_ejtag_misc, cpu_loop, emmc,
> + gspi, hif_misc, hif_nf, i2c1, i2c2, i2c3,
> + i2c4, i2c5, mmc, nand, scpu_ejtag_gpio,
> + scpu_ejtag_cr, sdio, sensor, spdif, tp0, tp1,
> + uart1, usb ]
> +
> + drive-strength:
> + enum: [2, 4, 8]
> +
> + bias-pull-down: true
> +
> + bias-pull-up: true
> +
> + bias-disable: true
> +
> + input-schmitt-disable: true
> +
> + input-schmitt-enable: true
> +
> + required:
> + - groups
> + - function
> +
> + additionalProperties: false

Also need a top-level 'additionalProperties: false'

With that,

Reviewed-by: Rob Herring <robh@kernel.org>

\
 
 \ /
  Last update: 2020-07-16 21:56    [W:0.088 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site