lkml.org 
[lkml]   [2020]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drm/vkms: add wait_for_vblanks in atomic_commit_tail
On 07/15, Sidong Yang wrote:
> On Wed, Jul 15, 2020 at 10:17:56AM +0200, Daniel Vetter wrote:
> > On Tue, Jul 14, 2020 at 9:01 PM Melissa Wen <melissa.srw@gmail.com> wrote:
> > >
> > > On 07/14, Daniel Vetter wrote:
> > > > On Tue, Jul 14, 2020 at 07:39:42AM -0300, Melissa Wen wrote:
> > > > > On Tue, Jul 14, 2020 at 7:20 AM Melissa Wen <melissa.srw@gmail.com> wrote:
> > > > > >
> > > > > > On 07/13, Daniel Vetter wrote:
> > > > > > > On Fri, Jul 10, 2020 at 02:05:33PM -0300, Melissa Wen wrote:
> > > > > > > > On 07/02, Daniel Vetter wrote:
> > > > > > > > > On Wed, Jul 01, 2020 at 03:31:34PM +0000, Sidong Yang wrote:
> > > > > > > > > > there is an error when igt test is run continuously. vkms_atomic_commit_tail()
> > > > > > > > > > need to call drm_atomic_helper_wait_for_vblanks() for give up ownership of
> > > > > > > > > > vblank events. without this code, next atomic commit will not enable vblank
> > > > > > > > > > and raise timeout error.
> > > > > > > > > >
> > > > > > > > > > Signed-off-by: Sidong Yang <realwakka@gmail.com>
> > > > > > > > > > ---
> > > > > > > > > > drivers/gpu/drm/vkms/vkms_drv.c | 2 ++
> > > > > > > > > > 1 file changed, 2 insertions(+)
> > > > > > > > > >
> > > > > > > > > > diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> > > > > > > > > > index 1e8b2169d834..10b9be67a068 100644
> > > > > > > > > > --- a/drivers/gpu/drm/vkms/vkms_drv.c
> > > > > > > > > > +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> > > > > > > > > > @@ -93,6 +93,8 @@ static void vkms_atomic_commit_tail(struct drm_atomic_state *old_state)
> > > > > > > > > > flush_work(&vkms_state->composer_work);
> > > > > > > > > > }
> > > > > > > > > >
> > > > > > > > > > + drm_atomic_helper_wait_for_vblanks(dev, old_state);
> > > > > > > > >
> > > > > > > > > Uh, we have a wait_for_flip_done right above, which should be doing
> > > > > > > > > exactly the same, but more precisely: Instead of just waiting for any
> > > > > > > > > vblank to happen, we wait for exactly the vblank corresponding to this
> > > > > > > > > atomic commit. So no races possible. If this is papering over some issue,
> > > > > > > > > then I think more debugging is needed.
> > > > > > > > >
> > > > > > > > > What exactly is going wrong here for you?
> > > > > > > >
> > > > > > > > Hi Daniel and Sidong,
> > > > > > > >
> > > > > > > > I noticed a similar issue when running the IGT test kms_cursor_crc. For
> > > > > > > > example, a subtest that passes on the first run (alpha-opaque) fails on
> > > > > > > > the second due to a kind of busy waiting in subtest preparation (the
> > > > > > > > subtest fails before actually running).
> > > > > > > >
> > > > > > > > In addition, in the same test, the dpms subtest started to fail since
> > > > > > > > the commit that change from wait_for_vblanks to wait_for_flip_done. By
> > > > > > > > reverting this commit, the dpms subtest passes again and the sequential
> > > > > > > > subtests return to normal.
> > > > > > > >
> > > > > > > > I am trying to figure out what's missing from using flip_done op on
> > > > > > > > vkms, since I am also interested in solving this problem and I
> > > > > > > > understand that the change for flip_done has been discussed in the past.
> > > > > > > >
> > > > > > > > Do you have any idea?
> > > > > > >
> > > > > > > Uh, not at all. This is indeed rather surprising ...
> > > > > > >
> > > > > > > What exactly is the failure mode when running a test the 2nd time? Full
> > > > > > > igt logs might give me an idea. But yeah this is kinda surprising.
> > > > > >
> > > > > > Hi Daniel,
> > > > > >
> > > > > > This is the IGT log of the 2nd run of kms_cursor_crc/alpha-opaque:
> > > > > >
> > > > > > IGT-Version: 1.25-NO-GIT (x86_64) (Linux: 5.8.0-rc2-DRM+ x86_64)
> > > > > > Force option used: Using driver vkms
> > > > > > Starting subtest: pipe-A-cursor-alpha-opaque
> > > > > > Timed out: Opening crc fd, and poll for first CRC.
> > > > > > Subtest pipe-A-cursor-alpha-opaque failed.
> > > > > > **** DEBUG ****
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: Virtual-1: set_pipe(A)
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: Virtual-1: Selecting pipe A
> > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=1024, height=768, format=XR24(0x34325258), modifier=0x0, size=0)
> > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=1, pitch=4096)
> > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: Test requirement passed: cairo_surface_status(fb->cairo_surface) == CAIRO_STATUS_SUCCESS
> > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: igt_create_fb_with_bo_size(width=1024, height=768, format=XR24(0x34325258), modifier=0x0, size=0)
> > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: igt_create_fb_with_bo_size(handle=2, pitch=4096)
> > > > > > (kms_cursor_crc:2317) igt_fb-DEBUG: Test requirement passed: cairo_surface_status(fb->cairo_surface) == CAIRO_STATUS_SUCCESS
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: Test requirement passed: plane_idx >= 0 && plane_idx < pipe->n_planes
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: A.0: plane_set_fb(37)
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: A.0: plane_set_size (1024x768)
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: A.0: fb_set_position(0,0)
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: A.0: fb_set_size(1024x768)
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: commit {
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: Virtual-1: SetCrtc pipe A, fb 37, src (0, 0), mode 1024x768
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: SetCursor pipe A, disabling
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: MoveCursor pipe A, (0, 0)
> > > > > > (kms_cursor_crc:2317) igt_kms-DEBUG: display: }
> > > > > > (kms_cursor_crc:2317) igt_debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0'
> > > > > > (kms_cursor_crc:2317) igt_debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0'
> > > > > > (kms_cursor_crc:2317) igt_debugfs-DEBUG: Opening debugfs directory '/sys/kernel/debug/dri/0'
> > > > > > (kms_cursor_crc:2317) igt_core-INFO: Timed out: Opening crc fd, and poll for first CRC.
> > > > > > **** END ****
> > > > > > Subtest pipe-A-cursor-alpha-opaque: FAIL (10.017s)
> > > > > >
> > > > > > ---
> > > > > >
> > > > > > What I found was a timeout in the poll of
> > > > > > igt_debugfs/igt_pipe_crc_start() that in turn is called in the
> > > > > > prepare_crc() of kms_cursor_crc.
> > > > > >
> > > > > > Initially, I thought it was just a matter of timing for vblank and sent
> > > > > > a patch to IGT that solved the problem by calling igt_wait_for_vblank()
> > > > > > before the "start" op. But then I saw that the timeout also happens in a
> > > > > > similar way in the dpms subtest, which before the change to flip_done
> > > > > > was succeded.
> > > > > >
> > > > > > I still have doubts if it is or not a matter of timing...
> > > > >
> > > > > Just to complement, this is what I sent to IGT due to my first suspicion
> > > > > (still not reviewed): https://patchwork.freedesktop.org/series/78813/
> > > >
> > > > Hm, so the first patch makes some sense I think, that would indeed be a
> > > > test bug if we pile up the crc and leak the old one.
> > > >
> > > > The 2nd patch looks a bit like similar duct-tape like the kernel patch
> > > > here, somehow forcing a full vblank wait instead of just waiting for the
> > > > previos flip to complete fixes something. I'm just really confused what it
> > > > could be.
> > > >
> > > > We don't have multiple crtc in vkms, so it's likely not that, but it could
> > > > be that something goes wrong when we switch everything on. And after one
> > > > vblank, things are in sync and working ...
> > > >
> > > > Maybe to test this theory, adding a drm_crtc_wait_one_vblank() to the
> > > > crtc->enable function? If that fixes all these bugs, then we at least have
> > > > a better idea where this vblank wait is needed, and can try to investigate
> > > > a bit more focused why.
> > >
> > > Hey,
> > >
> > > I just checked this way (let me know if I made a mistake):
> > >
> > > diff --git a/drivers/gpu/drm/vkms/vkms_crtc.c b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > index ac85e17428f8..893d451fa966 100644
> > > --- a/drivers/gpu/drm/vkms/vkms_crtc.c
> > > +++ b/drivers/gpu/drm/vkms/vkms_crtc.c
> > > @@ -212,6 +212,7 @@ static void vkms_crtc_atomic_enable(struct drm_crtc *crtc,
> > > struct drm_crtc_state *old_state)
> > > {
> > > drm_crtc_vblank_on(crtc);
> > > + drm_crtc_wait_one_vblank(crtc);
> > > }
> > >
> > > and yes, in the case of kms_cursor_crc, it solves the failure of the 2nd
> > > run (ie, sequential run) and the failure of the cursor-dpms subtest.
> > >
> > > :)
> > > >
> > > > I don't think it's relevant for crtc->disable, since once the crtc is off,
> > > > vblanks stop doing anything. And since steady-state seems to work (at
> > > > least your igt patch only adds a vblank wait on setup), so I don't think
> > > > we need it for all flips ...
> > >
> > > I'm not sure if it's also related: I noticed that the cursor-suspend
> > > subtest has another pipe_crc_start that is also "requiring" another
> > > igt_wait_for_vblank before it.
> > >
> > > Describing a little more, the cursor-dpms and cursor-suspend subtests
> > > have the same setup structure [do_single_test()] besides the
> > > prepare_crtc, but in the case of cursor-suspend, even applying any of
> > > these "proposals" to wait for vblank, it still breaks due to timeout
> > > issues in a last pipe_crc_start. The cursor-suspend subtest only
> > > completes when we add another igt_wait_for_vblank also here.
> >
> > Excellent debug work, that's some solid information that limits the
> > scope of the bug. I think the next step would be to put a vblank wait
> > into the vkms crc setup function. If that papers over all the bugs
> > you've found, then that should give us pretty solid information about
> > what's breaking. And hopefully only a little bit of code to further
> > debug.
> >
> > Cheers, Daniel
>
> Hi, Daniel and Melissa.
> I tested the code that Daniel said.
>
> diff --git a/drivers/gpu/drm/vkms/vkms_composer.c b/drivers/gpu/drm/vkms/vkms_composer.c
> index 4af2f19480f4..f7309b54b86a 100644
> --- a/drivers/gpu/drm/vkms/vkms_composer.c
> +++ b/drivers/gpu/drm/vkms/vkms_composer.c
> @@ -239,6 +239,7 @@ int vkms_set_crc_source(struct drm_crtc *crtc, const char *src_name)
> bool enabled = false;
> int ret = 0;
>
> + //drm_crtc_wait_one_vblank(crtc);
> ret = vkms_crc_parse_source(src_name, &enabled);
>
> spin_lock_irq(&out->lock);
>
> and It solves all problem. I traced this code and it enable vblank in set_crc_source
>
> 0) | vkms_set_crc_source [vkms]() {
> 0) 1.687 us | vkms_enable_vblank [vkms]();
> 0) 0.165 us | vkms_get_vblank_timestamp [vkms]();
>
> before this code, it enable vblank by drm_atomic_vblank_get() in crtc_atomic_flush.
>
> 0) | vkms_atomic_commit_tail [vkms]() {
> 0) 0.574 us | vkms_crtc_atomic_begin [vkms]();
> 0) 0.487 us | vkms_plane_atomic_update [vkms]();
> 0) | vkms_crtc_atomic_flush [vkms]() {
> 0) 1.934 us | vkms_enable_vblank [vkms]();
> 0) 0.347 us | vkms_get_vblank_timestamp [vkms]();
> 0) 0.379 us | vkms_get_vblank_timestamp [vkms]();
> 0) 6.789 us | }
>
> I think there is some problem because wait_for_flip_done() wait for only affected crtc.
> but kms_cursor_crc only set cursor call and maybe wait_for_flip_done() assumes this call
> doesn't affact crtc.

Hi,

In addition to kms_cursor_crc, did you see this timeout problem in some
other test?

I saw similar, but even more strange behavior in kms_pipe_crc_basic. In
the case of this test, when I load the vkms module and run the first
subtest related to crc capture (read-crc-pipe), the first execution is
obstructed by this kind of timeout, but from then on everything goes
back to normal. If I unload and load the vkms again, the weird situation
repeats.

I just noticed in dmesg that, as soon as we load the module, the
first subtest that requires a vblank will trigger a warning - but that
happens for any IGT test:

[ 892.520876] [drm] Initialized vkms 1.0.0 20180514 for vkms on minor 0
[ 897.209654] [IGT] kms_pipe_crc_basic: executing
[ 897.224316] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
[ 897.229659] ------------[ cut here ]------------
[ 897.229661] WARNING: CPU: 0 PID: 1339 at
drivers/gpu/drm/vkms/vkms_crtc.c:91 vkms_get_vblank_timestamp+0x46/0x50
[vkms]
[ 897.229661] Modules linked in: vkms drm_kms_helper syscopyarea
sysfillrect sysimgblt fb_sys_fops cec drm backlight md4 cmac nls_utf8
cifs libdes dns_resolver fscache libarc4 ppdev input_leds joydev
parport_pc mousedev pcspkr serio_raw parport evdev qemu_fw_cfg intel_agp
mac_hid intel_gtt agpgart ip_tables x_tables ext4 crc32c_generic crc16
mbcache jbd2 sr_mod sd_mod cdrom ata_generic pata_acpi ata_piix psmouse
atkbd libps2 libata scsi_mod e1000 i2c_piix4 floppy i8042 serio [last
unloaded: syscopyarea]
[ 897.229679] CPU: 0 PID: 1339 Comm: kms_pipe_crc_ba Tainted: G W 5.8.0-rc2-DRM-MISC+ #103
[ 897.229679] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
[ 897.229680] RIP: 0010:vkms_get_vblank_timestamp+0x46/0x50 [vkms]
[ 897.229681] Code: 19 00 00 48 c1 e0 05 48 03 86 48 03 00 00 48 89 0a
48 39 88 20 01 00 00 74 10 48 2b 8e 18 1a 00 00 b8 01 00 00 00 48 89 0a
c3 <0f> 0b b8 01 00 00 00 c3 66 90 0f 1f 44 00 00 48 81 c7 f0 0a 00 00
[ 897.229681] RSP: 0018:ffffa83b80507af8 EFLAGS: 00010046
[ 897.229682] RAX: ffff96673bf59c28 RBX: ffffa83b80507b38 RCX: 0000000000000000
[ 897.229683] RDX: ffffa83b80507b38 RSI: ffff96673cb12000 RDI: ffff96673cb12ee8
[ 897.229684] RBP: ffff96673cb12000 R08: 00000000de89d0ca R09: 0000000000000000
[ 897.229684] R10: 0000000000080000 R11: 0000000000000000 R12: 0000000000000000
[ 897.229685] R13: 0000000000000000 R14: ffff96673cb12350 R15: ffff966733ebf5f0
[ 897.229685] FS: 00007f18c863f180(0000) GS:ffff96673ec00000(0000) knlGS:0000000000000000
[ 897.229686] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 897.229686] CR2: 00007f18c8357000 CR3: 000000003c9b0000 CR4: 00000000000006f0
[ 897.229687] Call Trace:
[ 897.229687] drm_get_last_vbltimestamp+0xaa/0xc0 [drm]
[ 897.229688] drm_reset_vblank_timestamp+0x5b/0xd0 [drm]
[ 897.229688] drm_crtc_vblank_on+0x88/0x140 [drm]
[ 897.229689] drm_atomic_helper_commit_modeset_enables+0x1d2/0x220 [drm_kms_helper]
[ 897.229689] vkms_atomic_commit_tail+0x33/0xb0 [vkms]
[ 897.229690] commit_tail+0x94/0x130 [drm_kms_helper]
[ 897.229690] drm_atomic_helper_commit+0x132/0x160 [drm_kms_helper]
[ 897.229691] drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper]
[ 897.229691] drm_mode_setcrtc+0x1dd/0x6d0 [drm]
[ 897.229692] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 897.229692] drm_ioctl_kernel+0xad/0x100 [drm]
[ 897.229693] drm_ioctl+0x20c/0x3a0 [drm]
[ 897.229693] ? drm_mode_getcrtc+0x180/0x180 [drm]
[ 897.229693] ? __task_pid_nr_ns+0x6b/0xd0
[ 897.229694] ksys_ioctl+0x87/0xc0
[ 897.229694] __x64_sys_ioctl+0x16/0x20
[ 897.229695] do_syscall_64+0x4d/0x90
[ 897.229695] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 897.229696] RIP: 0033:0x7f18ca3ed457
[ 897.229696] Code: Bad RIP value.
[ 897.229696] RSP: 002b:00007ffd96a276e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 897.229698] RAX: ffffffffffffffda RBX: 00007ffd96a27720 RCX: 00007f18ca3ed457
[ 897.229698] RDX: 00007ffd96a27720 RSI: 00000000c06864a2 RDI: 0000000000000003
[ 897.229699] RBP: 00000000c06864a2 R08: 0000000000000000 R09: 000055dec3bdb318
[ 897.229699] R10: 0000000000000000 R11: 0000000000000246 R12: 000055dec3bdb310
[ 897.229700] R13: 0000000000000003 R14: 000055dec3bd9780 R15: 0000000000000025
[ 897.229700] ---[ end trace e909a3abdb957d23 ]---
[ 907.222149] [IGT] kms_pipe_crc_basic: exiting, ret=98
[ 919.725223] [IGT] kms_pipe_crc_basic: executing
[ 919.756611] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
[ 919.949258] [IGT] kms_pipe_crc_basic: exiting, ret=0
[ 921.000821] [IGT] kms_pipe_crc_basic: executing
[ 921.014152] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
[ 921.181640] [IGT] kms_pipe_crc_basic: exiting, ret=0
[ 922.049606] [IGT] kms_pipe_crc_basic: executing
[ 922.073160] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
[ 922.247318] [IGT] kms_pipe_crc_basic: exiting, ret=0
[ 926.948820] [IGT] kms_pipe_crc_basic: executing
[ 926.961950] [IGT] kms_pipe_crc_basic: starting subtest read-crc-pipe-A
[ 927.127187] [IGT] kms_pipe_crc_basic: exiting, ret=0

My point is this warning appears to "block" execution only in the case
of kms_pipe_crc_basic. And then, with this drm_crtc_wait_one_vblank in
set_crc, this problem stops happening also here.

On the other hand, I also saw that wait_one_vblank changed the result of
some kms_plane subtests (since they call igt_pipe_crc_start), but it
does not affect kms_flip. I mean, I'm trying to understand all of this
better, but it seems focused on this moment to start capturing of crc.

Melissa
>
> I'll keep trace this problem.
> Thanks.
> -Sidong
>
> > >
> > > >
> > > > Stil confused what's going on here.
> > > > -Daniel
> > > >
> > > > >
> > > > > >
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > Melissa
> > > > > > >
> > > > > > > Also happy to chat on irc for debugging ideas, that might be faster (I'm
> > > > > > > danvet on #dri-devel on freenode).
> > > > > > > -Daniel
> > > > > > >
> > > > > > > >
> > > > > > > > Melissa
> > > > > > > >
> > > > > > > > > -Daniel
> > > > > > > > >
> > > > > > > > > > +
> > > > > > > > > > drm_atomic_helper_cleanup_planes(dev, old_state);
> > > > > > > > > > }
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > 2.17.1
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > Daniel Vetter
> > > > > > > > > Software Engineer, Intel Corporation
> > > > > > > > > http://blog.ffwll.ch
> > > > > > > > > _______________________________________________
> > > > > > > > > dri-devel mailing list
> > > > > > > > > dri-devel@lists.freedesktop.org
> > > > > > > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > > > > > >
> > > > > > > --
> > > > > > > Daniel Vetter
> > > > > > > Software Engineer, Intel Corporation
> > > > > > > http://blog.ffwll.ch
> > > > > _______________________________________________
> > > > > dri-devel mailing list
> > > > > dri-devel@lists.freedesktop.org
> > > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> > > >
> > > > --
> > > > Daniel Vetter
> > > > Software Engineer, Intel Corporation
> > > > http://blog.ffwll.ch
> > > _______________________________________________
> > > dri-devel mailing list
> > > dri-devel@lists.freedesktop.org
> > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
> >
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch

\
 
 \ /
  Last update: 2020-07-15 17:57    [W:0.286 / U:0.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site