lkml.org 
[lkml]   [2020]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v6 0/2] phy: bcm63xx-usbh: Add BCM63xx USBH driver
Date
v6: introduce changes suggested by Rob and Vinod:
- Remove BMIPS_GENERIC default from kconfig.
- Print registered message as debug.
- Add another if case to device tree binding for SoCs with just 1 clock.
- Ignored "additionalProperties: false" suggestion since it triggers a
warning. This has been reported, but I haven't received any answer yet.
v5: use devm_reset_control_get_exclusive.
v4: fix dt-bindings documentation and improve device mode config.
v3: introduce changes suggested by Florian:
- Add support for device mode.
v2: introduce changes suggested by Florian:
- phy-cells changed to 1.
- Drop OF dependency (use device_get_match_data).
- Drop __initconst from variant tables.
- Use devm_clk_get_optional.

Álvaro Fernández Rojas (2):
dt-bindings: phy: add bcm63xx-usbh bindings
phy: bcm63xx-usbh: Add BCM63xx USBH driver

.../bindings/phy/brcm,bcm63xx-usbh-phy.yaml | 97 ++++
drivers/phy/broadcom/Kconfig | 8 +
drivers/phy/broadcom/Makefile | 1 +
drivers/phy/broadcom/phy-bcm63xx-usbh.c | 457 ++++++++++++++++++
4 files changed, 563 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml
create mode 100644 drivers/phy/broadcom/phy-bcm63xx-usbh.c

--
2.27.0

\
 
 \ /
  Last update: 2020-07-15 15:18    [W:0.068 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site