lkml.org 
[lkml]   [2020]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] PCI: aardvark: Don't touch PCIe registers if no card connected
On Monday 13 July 2020 12:23:25 Lorenzo Pieralisi wrote:
> On Mon, Jul 13, 2020 at 10:27:47AM +0200, Pali Rohár wrote:
> > On Friday 10 July 2020 10:18:00 Lorenzo Pieralisi wrote:
> > > On Thu, Jul 09, 2020 at 05:09:59PM +0200, Pali Rohár wrote:
> > > > > I understand that but the bridge bus resource can be trimmed to just
> > > > > contain the root bus because that's the only one where there is a
> > > > > chance you can enumerate a device.
> > > >
> > > > It is possible to register only root bridge without endpoint?
> > >
> > > It is possible to register the root bridge with a trimmed IORESOURCE_BUS
> > > so that you don't enumerate anything other than the root port.
> >
> > Hello Lorenzo! I really do not know how to achieve it. From code it
> > looks like that pci/probe.c scans child buses unconditionally.
> >
> > pci-aardvark.c calls pci_host_probe() which calls functions
> > pci_scan_root_bus_bridge() which calls pci_scan_child_bus() which calls
> > pci_scan_child_bus_extend() which calls pci_scan_bridge_extend() (bridge
> > needs to be reconfigured) which then try to probe child bus via
> > pci_scan_child_bus_extend() because bridge is not card bus.
> >
> > In function pci_scan_bridge_extend() I do not see a way how to skip
> > probing for child buses which would avoid enumerating aardvark root
> > bridge when PCIe device is not connected.
> >
> > dmesg output contains:
> >
> > advk-pcie d0070000.pcie: link never came up
> > advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
> > pci_bus 0000:00: root bus resource [bus 00-ff]
>
> This resource can be limited to the root bus number only before calling
> pci_host_probe() (ie see pci_parse_request_of_pci_ranges() and code in
> pci_scan_bridge_extend() that programs primary/secondary/subordinate
> busses) but I think that only papers over the issue, it does not fix it.

I looked at the code in pci/probe.c again and I do not think it is
possible to avoid scanning devices. pci_scan_child_bus_extend() is
unconditionally calling pci_scan_slot() for devfn=0 as the first thing.
And this function unconditionally calls pci_scan_device() which is
directly trying to read vendor id from config register.

So for me it looks like that kernel expects that can read vendor id and
device id from config register for device which is not connected.

And trying to read config register would cause those timeouts in
aardvark.

\
 
 \ /
  Last update: 2020-07-15 14:18    [W:0.111 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site