lkml.org 
[lkml]   [2020]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
Subject[PATCH 3/3 v3] usb: typec: tcpm: Stay in BIST mode till hardreset or unattached
From
Port starts to toggle when transitioning to unattached state.
This is incorrect while in BIST mode.

6.4.3.1 BIST Carrier Mode
Upon receipt of a BIST Message, with a BIST Carrier Mode BIST Data Object,
the UUT Shall send out a continuous string of BMC encoded alternating "1"s
and “0”s. The UUT Shall exit the Continuous BIST Mode within
tBISTContMode of this Continuous BIST Mode being enabled(see
Section 6.6.7.2).

6.4.3.2 BIST Test Data
Upon receipt of a BIST Message, with a BIST Test Data BIST Data Object,
the UUT Shall return a GoodCRC Message and Shall enter a test mode in which
it sends no further Messages except for GoodCRC Messages in response to
received Messages. See Section 5.9.2 for the definition of the Test Data
Frame. The test Shall be ended by sending Hard Reset Signaling to reset the
UUT.

Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
---
Version history:
Changes since V1:
- None

Changes since V2:(Guenter's suggestions)
- Fixed formatting error
- Reduced timeout to 50ms

---
drivers/usb/typec/tcpm/tcpm.c | 7 +++++--
include/linux/usb/pd.h | 1 +
2 files changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 379fcab9dbd973..38b958a9650104 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -3559,6 +3559,8 @@ static void run_state_machine(struct tcpm_port *port)
switch (BDO_MODE_MASK(port->bist_request)) {
case BDO_MODE_CARRIER2:
tcpm_pd_transmit(port, TCPC_TX_BIST_MODE_2, NULL);
+ tcpm_set_state(port, unattached_state(port),
+ PD_T_BIST_CONT_MODE);
break;
case BDO_MODE_TESTDATA:
if (port->tcpc->set_bist_data) {
@@ -3569,8 +3571,6 @@ static void run_state_machine(struct tcpm_port *port)
default:
break;
}
- /* Always switch to unattached state */
- tcpm_set_state(port, unattached_state(port), 0);
break;
case GET_STATUS_SEND:
tcpm_pd_send_control(port, PD_CTRL_GET_STATUS);
@@ -3960,6 +3960,9 @@ static void _tcpm_pd_vbus_off(struct tcpm_port *port)
static void _tcpm_pd_hard_reset(struct tcpm_port *port)
{
tcpm_log_force(port, "Received hard reset");
+ if (port->bist_request == BDO_MODE_TESTDATA && port->tcpc->set_bist_data)
+ port->tcpc->set_bist_data(port->tcpc, false);
+
/*
* If we keep receiving hard reset requests, executing the hard reset
* must have failed. Revert to error recovery if that happens.
diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h
index a665d7f211424d..b6c233e79bd457 100644
--- a/include/linux/usb/pd.h
+++ b/include/linux/usb/pd.h
@@ -483,4 +483,5 @@ static inline unsigned int rdo_max_power(u32 rdo)
#define PD_N_CAPS_COUNT (PD_T_NO_RESPONSE / PD_T_SEND_SOURCE_CAP)
#define PD_N_HARD_RESET_COUNT 2

+#define PD_T_BIST_CONT_MODE 50 /* 30 - 60 ms */
#endif /* __LINUX_USB_PD_H */
--
2.27.0.389.gc38d7665816-goog
\
 
 \ /
  Last update: 2020-07-16 05:42    [W:0.034 / U:0.796 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site