lkml.org 
[lkml]   [2020]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 0/5] Add support for Ingenic X1830 SoC and Y&A CU1830-Neo board.
Date
v3->v4:
1.Modify the commit message and add the change description
for CU1000-Neo in patch [2/5].
2.The wrongly written "ingenic,x1000" in compatible is
changed to "ingenic,x1000e" in "cu1000-neo.dts".
3.Adjust the order of nodes according to the corresponding
address value for X1000.
4.Drop unnecessary node in "wlan_pwrseq" in "cu1000-neo.dts".
5.Add the leds node to "cu1000-neo.dts".

周琰杰 (Zhou Yanjie) (5):
MIPS: Ingenic: Add Ingenic X1830 support.
dt-bindings: MIPS: Add X1830 based CU1830-Neo and fix bug in
CU1000-Neo.
MIPS: Ingenic: Add YSH & ATIL CU Neo board support.
MIPS: Ingenic: Fix bugs and add missing LED node for X1000.
MIPS: CU1000-Neo: Refresh defconfig to support LED.

.../devicetree/bindings/mips/ingenic/devices.yaml | 12 +-
arch/mips/boot/dts/ingenic/Makefile | 1 +
arch/mips/boot/dts/ingenic/cu1000-neo.dts | 114 ++++----
arch/mips/boot/dts/ingenic/cu1830-neo.dts | 168 ++++++++++++
arch/mips/boot/dts/ingenic/x1000.dtsi | 126 +++++----
arch/mips/boot/dts/ingenic/x1830.dtsi | 300 +++++++++++++++++++++
arch/mips/configs/cu1000-neo_defconfig | 4 +
arch/mips/configs/cu1830-neo_defconfig | 123 +++++++++
arch/mips/jz4740/Kconfig | 10 +
9 files changed, 733 insertions(+), 125 deletions(-)
create mode 100644 arch/mips/boot/dts/ingenic/cu1830-neo.dts
create mode 100644 arch/mips/boot/dts/ingenic/x1830.dtsi
create mode 100644 arch/mips/configs/cu1830-neo_defconfig

--
2.11.0

\
 
 \ /
  Last update: 2020-07-14 07:33    [W:0.050 / U:0.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site