lkml.org 
[lkml]   [2020]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRE: [PATCH v4 08/10] net: eth: altera: add support for ptp and timestamping
Date
> -----Original Message-----
> From: Richard Cochran <richardcochran@gmail.com>
> Sent: Thursday, July 9, 2020 7:31 PM
> To: Ooi, Joyce <joyce.ooi@intel.com>
> Cc: Thor Thayer <thor.thayer@linux.intel.com>; David S . Miller
> <davem@davemloft.net>; Jakub Kicinski <kuba@kernel.org>;
> netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Dalon Westergreen
> <dalon.westergreen@linux.intel.com>; Tan, Ley Foon
> <ley.foon.tan@intel.com>; See, Chin Liang <chin.liang.see@intel.com>;
> Nguyen, Dinh <dinh.nguyen@intel.com>; Westergreen, Dalon
> <dalon.westergreen@intel.com>
> Subject: Re: [PATCH v4 08/10] net: eth: altera: add support for ptp and
> timestamping
>
> On Wed, Jul 08, 2020 at 03:23:59PM +0800, Ooi, Joyce wrote:
>
> > @@ -222,6 +223,32 @@ static void tse_get_regs(struct net_device *dev,
> struct ethtool_regs *regs,
> > buf[i] = csrrd32(priv->mac_dev, i * 4); }
> >
> > +static int tse_get_ts_info(struct net_device *dev,
> > + struct ethtool_ts_info *info)
> > +{
> > + struct altera_tse_private *priv = netdev_priv(dev);
> > +
> > + if (priv->ptp_enable) {
> > + if (priv->ptp_priv.ptp_clock)
> > + info->phc_index =
> > + ptp_clock_index(priv->ptp_priv.ptp_clock);
>
> Need to handle case where priv->ptp_priv.ptp_clock == NULL.

Ok, will add a checking if priv->ptp_priv.ptp_clock == NULL, it'll return error.

>
> > + info->so_timestamping =
> SOF_TIMESTAMPING_TX_HARDWARE |
> > +
> SOF_TIMESTAMPING_RX_HARDWARE |
> > +
> SOF_TIMESTAMPING_RAW_HARDWARE;
> > +
> > + info->tx_types = (1 << HWTSTAMP_TX_OFF) |
> > + (1 << HWTSTAMP_TX_ON);
>
> No need to break statement. This fits nicely on one line.
>
> > +
> > + info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) |
> > + (1 <<
> HWTSTAMP_FILTER_ALL);
> > +
> > + return 0;
> > + } else {
>
> No need for else block.

Noted, will make the changes.
>
> > + return ethtool_op_get_ts_info(dev, info);
> > + }
> > +}
> > +
> > static const struct ethtool_ops tse_ethtool_ops = {
> > .get_drvinfo = tse_get_drvinfo,
> > .get_regs_len = tse_reglen,
>
>
> > @@ -1309,6 +1324,83 @@ static int tse_shutdown(struct net_device *dev)
> > return 0;
> > }
> >
> > +/* ioctl to configure timestamping */ static int tse_do_ioctl(struct
> > +net_device *dev, struct ifreq *ifr, int cmd) {
> > + struct altera_tse_private *priv = netdev_priv(dev);
> > + struct hwtstamp_config config;
>
> Need to check here for phy_has_hwtstamp() and pass through to PHY layer
> if true.

Ok, will add a phy_has_hwtstamp checking before if (cmd == SIOCSHWTSTAMP) and if (cmd == SIOCGHWTSTAMP) are called.
>
> > +
> > + if (!netif_running(dev))
> > + return -EINVAL;
> > +
> > + if (!priv->ptp_enable) {
> > + netdev_alert(priv->dev, "Timestamping not supported");
> > + return -EOPNOTSUPP;
> > + }
> > +
> > + if (cmd == SIOCSHWTSTAMP) {
> > + if (copy_from_user(&config, ifr->ifr_data,
> > + sizeof(struct hwtstamp_config)))
> > + return -EFAULT;
> > +
> > + if (config.flags)
> > + return -EINVAL;
> > +
> > + switch (config.tx_type) {
> > + case HWTSTAMP_TX_OFF:
> > + priv->hwts_tx_en = 0;
> > + break;
> > + case HWTSTAMP_TX_ON:
> > + priv->hwts_tx_en = 1;
> > + break;
> > + default:
> > + return -ERANGE;
> > + }
> > +
> > + switch (config.rx_filter) {
> > + case HWTSTAMP_FILTER_NONE:
> > + priv->hwts_rx_en = 0;
> > + config.rx_filter = HWTSTAMP_FILTER_NONE;
> > + break;
> > + default:
> > + priv->hwts_rx_en = 1;
> > + config.rx_filter = HWTSTAMP_FILTER_ALL;
> > + break;
> > + }
> > +
> > + if (copy_to_user(ifr->ifr_data, &config,
> > + sizeof(struct hwtstamp_config)))
> > + return -EFAULT;
> > + else
> > + return 0;
> > + }
> > +
> > + if (cmd == SIOCGHWTSTAMP) {
> > + config.flags = 0;
> > +
> > + if (priv->hwts_tx_en)
> > + config.tx_type = HWTSTAMP_TX_ON;
> > + else
> > + config.tx_type = HWTSTAMP_TX_OFF;
> > +
> > + if (priv->hwts_rx_en)
> > + config.rx_filter = HWTSTAMP_FILTER_ALL;
> > + else
> > + config.rx_filter = HWTSTAMP_FILTER_NONE;
> > +
> > + if (copy_to_user(ifr->ifr_data, &config,
> > + sizeof(struct hwtstamp_config)))
> > + return -EFAULT;
> > + else
> > + return 0;
> > + }
> > +
> > + if (!dev->phydev)
> > + return -EINVAL;
> > +
> > + return phy_mii_ioctl(dev->phydev, ifr, cmd); }
> > +
> > static struct net_device_ops altera_tse_netdev_ops = {
> > .ndo_open = tse_open,
> > .ndo_stop = tse_shutdown,
>
>
> > @@ -1568,6 +1661,27 @@ static int altera_tse_probe(struct
> platform_device *pdev)
> > netdev_err(ndev, "Cannot attach to PHY (error: %d)\n", ret);
> > goto err_init_phy;
> > }
> > +
> > + priv->ptp_enable = of_property_read_bool(pdev->dev.of_node,
> > + "altr,has-ptp");
>
> The name "ptp_enable" is a poor choice. It sounds like something that can
> be enabled at run time. Suggest "has_ptp" instead.

Ok, will rename to 'has_ptp'.
>
> > + dev_info(&pdev->dev, "PTP Enable: %d\n", priv->ptp_enable);
> > +
> > + if (priv->ptp_enable) {
> > + /* MAP PTP */
> > + ret = intel_fpga_tod_probe(pdev, &priv->ptp_priv);
> > + if (ret) {
> > + dev_err(&pdev->dev, "cannot map PTP\n");
> > + goto err_init_phy;
> > + }
> > + ret = intel_fpga_tod_register(&priv->ptp_priv,
> > + priv->device);
> > + if (ret) {
> > + dev_err(&pdev->dev, "Failed to register PTP
> clock\n");
> > + ret = -ENXIO;
> > + goto err_init_phy;
> > + }
> > + }
> > +
> > return 0;
> >
> > err_init_phy:
>
>
> > +/* Initialize PTP control block registers */ int
> > +intel_fpga_tod_init(struct intel_fpga_tod_private *priv) {
> > + struct timespec64 now;
> > + int ret = 0;
> > +
> > + ret = intel_fpga_tod_adjust_fine(&priv->ptp_clock_ops, 0l);
>
> Why clobber a learned frequency offset here? If user space closes then re-
> opens, then it expects the old frequency to be preserved.
>
> It is fine to set this to zero when the driver loads, but not after.

I'll remove this adjust_fine() during init as it'll be called whenever the callback function is called.
>
> > + if (ret != 0)
> > + goto out;
> > +
> > + /* Initialize the hardware clock to the system time */
> > + ktime_get_real_ts64(&now);
>
> Please initialize to zero instead, as some people prefer it that way.
>
> (But only the first time when the driver loads!)

Ok sure, I'll initialize the hardware clock to 0.
>
> > + intel_fpga_tod_set_time(&priv->ptp_clock_ops, &now);
> > +
> > + spin_lock_init(&priv->tod_lock);
> > +
> > +out:
> > + return ret;
> > +}
>
> Thanks,
> Richard

\
 
 \ /
  Last update: 2020-07-15 05:50    [W:2.360 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site