lkml.org 
[lkml]   [2020]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 04/12] ppc64/kexec_file: avoid stomping memory used by special regions
Date

Hari Bathini <hbathini@linux.ibm.com> writes:

> diff --git a/arch/powerpc/include/asm/crashdump-ppc64.h b/arch/powerpc/include/asm/crashdump-ppc64.h
> new file mode 100644
> index 0000000..90deb46
> --- /dev/null
> +++ b/arch/powerpc/include/asm/crashdump-ppc64.h
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +#ifndef _ASM_POWERPC_CRASHDUMP_PPC64_H
> +#define _ASM_POWERPC_CRASHDUMP_PPC64_H
> +
> +/* min & max addresses for kdump load segments */
> +#define KDUMP_BUF_MIN (crashk_res.start)
> +#define KDUMP_BUF_MAX ((crashk_res.end < ppc64_rma_size) ? \
> + crashk_res.end : (ppc64_rma_size - 1))
> +
> +#endif /* __ASM_POWERPC_CRASHDUMP_PPC64_H */
> diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
> index 7008ea1..bf47a01 100644
> --- a/arch/powerpc/include/asm/kexec.h
> +++ b/arch/powerpc/include/asm/kexec.h
> @@ -100,14 +100,16 @@ void relocate_new_kernel(unsigned long indirection_page, unsigned long reboot_co
> #ifdef CONFIG_KEXEC_FILE
> extern const struct kexec_file_ops kexec_elf64_ops;
>
> -#ifdef CONFIG_IMA_KEXEC
> #define ARCH_HAS_KIMAGE_ARCH
>
> struct kimage_arch {
> + struct crash_mem *exclude_ranges;
> +
> +#ifdef CONFIG_IMA_KEXEC
> phys_addr_t ima_buffer_addr;
> size_t ima_buffer_size;
> -};
> #endif
> +};
>
> int setup_purgatory(struct kimage *image, const void *slave_code,
> const void *fdt, unsigned long kernel_load_addr,
> @@ -125,6 +127,7 @@ int setup_new_fdt_ppc64(const struct kimage *image, void *fdt,
> unsigned long initrd_load_addr,
> unsigned long initrd_len, const char *cmdline);
> #endif /* CONFIG_PPC64 */
> +
> #endif /* CONFIG_KEXEC_FILE */
>
> #else /* !CONFIG_KEXEC_CORE */
> diff --git a/arch/powerpc/kexec/elf_64.c b/arch/powerpc/kexec/elf_64.c
> index 23ad04c..c695f94 100644
> --- a/arch/powerpc/kexec/elf_64.c
> +++ b/arch/powerpc/kexec/elf_64.c
> @@ -22,6 +22,7 @@
> #include <linux/of_fdt.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> +#include <asm/crashdump-ppc64.h>
>
> static void *elf64_load(struct kimage *image, char *kernel_buf,
> unsigned long kernel_len, char *initrd,
> @@ -46,6 +47,12 @@ static void *elf64_load(struct kimage *image, char *kernel_buf,
> if (ret)
> goto out;
>
> + if (image->type == KEXEC_TYPE_CRASH) {
> + /* min & max buffer values for kdump case */
> + kbuf.buf_min = pbuf.buf_min = KDUMP_BUF_MIN;
> + kbuf.buf_max = pbuf.buf_max = KDUMP_BUF_MAX;

This is only my personal opinion and an actual maintainer may disagree,
but just looking at the lines above, I would assume that KDUMP_BUF_MIN
and KDUMP_BUF_MAX were constants, when in fact they aren't.

I suggest using static inline macros in <asm/crashdump-ppc64.h>, for
example:

static inline resource_size_t get_kdump_buf_min(void)
{
return crashk_res.start;
}

static inline resource_size_t get_kdump_buf_max(void)
{
return (crashk_res.end < ppc64_rma_size) ? \
crashk_res.end : (ppc64_rma_size - 1)
}


> + }
> +
> ret = kexec_elf_load(image, &ehdr, &elf_info, &kbuf, &kernel_load_addr);
> if (ret)
> goto out;

<snip>

> +/**
> + * __locate_mem_hole_top_down - Looks top down for a large enough memory hole
> + * in the memory regions between buf_min & buf_max
> + * for the buffer. If found, sets kbuf->mem.
> + * @kbuf: Buffer contents and memory parameters.
> + * @buf_min: Minimum address for the buffer.
> + * @buf_max: Maximum address for the buffer.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +static int __locate_mem_hole_top_down(struct kexec_buf *kbuf,
> + u64 buf_min, u64 buf_max)
> +{
> + int ret = -EADDRNOTAVAIL;
> + phys_addr_t start, end;
> + u64 i;
> +
> + for_each_mem_range_rev(i, &memblock.memory, NULL, NUMA_NO_NODE,
> + MEMBLOCK_NONE, &start, &end, NULL) {
> + if (start > buf_max)
> + continue;
> +
> + /* Memory hole not found */
> + if (end < buf_min)
> + break;
> +
> + /* Adjust memory region based on the given range */
> + if (start < buf_min)
> + start = buf_min;
> + if (end > buf_max)
> + end = buf_max;
> +
> + start = ALIGN(start, kbuf->buf_align);
> + if (start < end && (end - start + 1) >= kbuf->memsz) {

This is why I dislike using start and end to express address ranges:

While struct resource seems to use the [address, end] convention, my
reading of memblock code is that it uses [addres, end). This is
guaranteed to lead to bugs. So the above has an off-by-one error. To
calculate the size of the current range, you need to use `end - start`.

> + /* Suitable memory range found. Set kbuf->mem */
> + kbuf->mem = ALIGN_DOWN(end - kbuf->memsz + 1,

Similarly, I believe the `+ 1` here is wrong.

> + kbuf->buf_align);
> + ret = 0;
> + break;
> + }
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * locate_mem_hole_top_down_ppc64 - Skip special memory regions to find a
> + * suitable buffer with top down approach.
> + * @kbuf: Buffer contents and memory parameters.
> + * @buf_min: Minimum address for the buffer.
> + * @buf_max: Maximum address for the buffer.
> + * @emem: Exclude memory ranges.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +static int locate_mem_hole_top_down_ppc64(struct kexec_buf *kbuf,
> + u64 buf_min, u64 buf_max,
> + const struct crash_mem *emem)
> +{
> + int i, ret = 0, err = -EADDRNOTAVAIL;
> + u64 start, end, tmin, tmax;
> +
> + tmax = buf_max;
> + for (i = (emem->nr_ranges - 1); i >= 0; i--) {
> + start = emem->ranges[i].start;
> + end = emem->ranges[i].end;
> +
> + if (start > tmax)
> + continue;
> +
> + if (end < tmax) {
> + tmin = (end < buf_min ? buf_min : end + 1);
> + ret = __locate_mem_hole_top_down(kbuf, tmin, tmax);
> + if (!ret)
> + return 0;
> + }
> +
> + tmax = start - 1;
> +
> + if (tmax < buf_min) {
> + ret = err;
> + break;
> + }
> + ret = 0;
> + }
> +
> + if (!ret) {
> + tmin = buf_min;
> + ret = __locate_mem_hole_top_down(kbuf, tmin, tmax);
> + }
> + return ret;
> +}
> +
> +/**
> + * __locate_mem_hole_bottom_up - Looks bottom up for a large enough memory hole
> + * in the memory regions between buf_min & buf_max
> + * for the buffer. If found, sets kbuf->mem.
> + * @kbuf: Buffer contents and memory parameters.
> + * @buf_min: Minimum address for the buffer.
> + * @buf_max: Maximum address for the buffer.
> + *
> + * Returns 0 on success, negative errno on error.
> + */
> +static int __locate_mem_hole_bottom_up(struct kexec_buf *kbuf,
> + u64 buf_min, u64 buf_max)
> +{
> + int ret = -EADDRNOTAVAIL;
> + phys_addr_t start, end;
> + u64 i;
> +
> + for_each_mem_range(i, &memblock.memory, NULL, NUMA_NO_NODE,
> + MEMBLOCK_NONE, &start, &end, NULL) {
> + if (end < buf_min)
> + continue;
> +
> + /* Memory hole not found */
> + if (start > buf_max)
> + break;
> +
> + /* Adjust memory region based on the given range */
> + if (start < buf_min)
> + start = buf_min;
> + if (end > buf_max)
> + end = buf_max;

buf_max is an inclusive end address, right? Then this should read
`end = buf_max + 1`. Same thing in the top-down version above.

> +
> + start = ALIGN(start, kbuf->buf_align);
> + if (start < end && (end - start + 1) >= kbuf->memsz) {

Same off-by-one problem. There shouldn't be a `+ 1` here.

> + /* Suitable memory range found. Set kbuf->mem */
> + kbuf->mem = start;
> + ret = 0;
> + break;
> + }
> + }
> +
> + return ret;
> +}


--
Thiago Jung Bauermann
IBM Linux Technology Center

\
 
 \ /
  Last update: 2020-07-15 04:41    [W:0.251 / U:0.364 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site