lkml.org 
[lkml]   [2020]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] hwmon: corsair-cpro: Change to hid driver
On Tue, Jul 14, 2020 at 12:52:30PM +0200, Marius Zachmann wrote:
> I found a project which uses hidraw to communicate with the device.
> Because I do not want to break any existing userspace code, I
> changed this to a hid driver, so hidraw can still be used.
> Do I need to include the hid maintainers for the undo in hid-quirks?
>
That changelog needs some improvements. It should state what change
was made, and why, but not include any questions or personal statements
such as "I found ...".

You never really explained why you had changed the driver from hid to
usb. Maybe you can explain that decision now ?

Thanks,
Guenter

> Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
> ---
> drivers/hid/hid-quirks.c | 2 -
> drivers/hwmon/Kconfig | 4 +-
> drivers/hwmon/corsair-cpro.c | 114 ++++++++++++++++++++++++++---------
> 3 files changed, 86 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
> index 7b7bc7737c53..ca8b5c261c7c 100644
> --- a/drivers/hid/hid-quirks.c
> +++ b/drivers/hid/hid-quirks.c
> @@ -699,8 +699,6 @@ static const struct hid_device_id hid_ignore_list[] = {
> { HID_USB_DEVICE(USB_VENDOR_ID_AXENTIA, USB_DEVICE_ID_AXENTIA_FM_RADIO) },
> { HID_USB_DEVICE(USB_VENDOR_ID_BERKSHIRE, USB_DEVICE_ID_BERKSHIRE_PCWD) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CIDC, 0x0103) },
> - { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x0c10) },
> - { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, 0x1d00) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI470X) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CYGNAL, USB_DEVICE_ID_CYGNAL_RADIO_SI4713) },
> { HID_USB_DEVICE(USB_VENDOR_ID_CMEDIA, USB_DEVICE_ID_CM109) },
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 8b046a5dfa40..c603d8c8e3d2 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -441,7 +441,7 @@ config SENSORS_BT1_PVT_ALARMS
>
> config SENSORS_CORSAIR_CPRO
> tristate "Corsair Commander Pro controller"
> - depends on USB
> + depends on HID
> help
> If you say yes here you get support for the Corsair Commander Pro
> controller.
> @@ -1716,7 +1716,7 @@ config SENSORS_ADS7871
>
> config SENSORS_AMC6821
> tristate "Texas Instruments AMC6821"
> - depends on I2C
> + depends on I2C
> help
> If you say yes here you get support for the Texas Instruments
> AMC6821 hardware monitoring chips.
> diff --git a/drivers/hwmon/corsair-cpro.c b/drivers/hwmon/corsair-cpro.c
> index fe625190e3a1..4310ee5aca24 100644
> --- a/drivers/hwmon/corsair-cpro.c
> +++ b/drivers/hwmon/corsair-cpro.c
> @@ -5,13 +5,14 @@
> */
>
> #include <linux/bitops.h>
> +#include <linux/completion.h>
> +#include <linux/hid.h>
> #include <linux/hwmon.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> #include <linux/slab.h>
> #include <linux/types.h>
> -#include <linux/usb.h>
>
> #define USB_VENDOR_ID_CORSAIR 0x1b1c
> #define USB_PRODUCT_ID_CORSAIR_COMMANDERPRO 0x0c10
> @@ -62,7 +63,8 @@
> #define NUM_TEMP_SENSORS 4
>
> struct ccp_device {
> - struct usb_device *udev;
> + struct hid_device *hdev;
> + struct completion wait_input_report;
> struct mutex mutex; /* whenever buffer is used, lock before send_usb_cmd */
> u8 *buffer;
> int pwm[6];
> @@ -75,7 +77,7 @@ struct ccp_device {
> /* send command, check for error in response, response in ccp->buffer */
> static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2, u8 byte3)
> {
> - int actual_length;
> + unsigned long t;
> int ret;
>
> memset(ccp->buffer, 0x00, OUT_BUFFER_SIZE);
> @@ -84,26 +86,39 @@ static int send_usb_cmd(struct ccp_device *ccp, u8 command, u8 byte1, u8 byte2,
> ccp->buffer[2] = byte2;
> ccp->buffer[3] = byte3;
>
> - ret = usb_bulk_msg(ccp->udev, usb_sndintpipe(ccp->udev, 2), ccp->buffer, OUT_BUFFER_SIZE,
> - &actual_length, 1000);
> - if (ret)
> - return ret;
> + reinit_completion(&ccp->wait_input_report);
>
> - /* response needs to be received every time */
> - ret = usb_bulk_msg(ccp->udev, usb_rcvintpipe(ccp->udev, 1), ccp->buffer, IN_BUFFER_SIZE,
> - &actual_length, 1000);
> - if (ret)
> + ret = hid_hw_output_report(ccp->hdev, ccp->buffer, OUT_BUFFER_SIZE);
> + if (ret < 0)
> return ret;
>
> + t = wait_for_completion_timeout(&ccp->wait_input_report, msecs_to_jiffies(300));
> + if (!t)
> + return -ETIMEDOUT;
> +
> /* first byte of response is error code */
> if (ccp->buffer[0] != 0x00) {
> - dev_dbg(&ccp->udev->dev, "device response error: %d", ccp->buffer[0]);
> + hid_dbg(ccp->hdev, "device response error: %d", ccp->buffer[0]);
> return -EIO;
> }
>
> return 0;
> }
>
> +static int ccp_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
> +{
> + struct ccp_device *ccp = hid_get_drvdata(hdev);
> +
> + /* only copy buffer when requested */
> + if (completion_done(&ccp->wait_input_report))
> + return 0;
> +
> + memcpy(ccp->buffer, data, min(IN_BUFFER_SIZE, size));
> + complete(&ccp->wait_input_report);
> +
> + return 0;
> +}
> +
> /* requests and returns single data values depending on channel */
> static int get_data(struct ccp_device *ccp, int command, int channel)
> {
> @@ -437,57 +452,96 @@ static int get_temp_cnct(struct ccp_device *ccp)
> return 0;
> }
>
> -static int ccp_probe(struct usb_interface *intf, const struct usb_device_id *id)
> +static int ccp_probe(struct hid_device *hdev, const struct hid_device_id *id)
> {
> struct device *hwmon_dev;
> struct ccp_device *ccp;
> int ret;
>
> - ccp = devm_kzalloc(&intf->dev, sizeof(*ccp), GFP_KERNEL);
> + ccp = devm_kzalloc(&hdev->dev, sizeof(*ccp), GFP_KERNEL);
> if (!ccp)
> return -ENOMEM;
>
> - ccp->buffer = devm_kmalloc(&intf->dev, OUT_BUFFER_SIZE, GFP_KERNEL);
> + ccp->buffer = devm_kmalloc(&hdev->dev, OUT_BUFFER_SIZE, GFP_KERNEL);
> if (!ccp->buffer)
> return -ENOMEM;
>
> + ret = hid_parse(hdev);
> + if (ret)
> + return ret;
> +
> + ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
> + if (ret)
> + return ret;
> +
> + ret = hid_hw_open(hdev);
> + if (ret)
> + goto out_hw_stop;
> +
> + ccp->hdev = hdev;
> + hid_set_drvdata(hdev, ccp);
> mutex_init(&ccp->mutex);
> + init_completion(&ccp->wait_input_report);
>
> - ccp->udev = interface_to_usbdev(intf);
> + hid_device_io_start(hdev);
>
> /* temp and fan connection status only updates when device is powered on */
> ret = get_temp_cnct(ccp);
> if (ret)
> - return ret;
> + goto out_hw_close;
>
> ret = get_fan_cnct(ccp);
> if (ret)
> - return ret;
> -
> - hwmon_dev = devm_hwmon_device_register_with_info(&intf->dev, "corsaircpro", ccp,
> + goto out_hw_close;
> + hwmon_dev = devm_hwmon_device_register_with_info(&hdev->dev, "corsaircpro", ccp,
> &ccp_chip_info, 0);
> + if (IS_ERR(hwmon_dev)) {
> + ret = PTR_ERR(hwmon_dev);
> + goto out_hw_close;
> + }
> +
> + return 0;
>
> - return PTR_ERR_OR_ZERO(hwmon_dev);
> +out_hw_close:
> + hid_hw_close(hdev);
> +out_hw_stop:
> + hid_hw_stop(hdev);
> + return ret;
> }
>
> -static void ccp_disconnect(struct usb_interface *intf)
> +static void ccp_remove(struct hid_device *hdev)
> {
> + hid_hw_close(hdev);
> + hid_hw_stop(hdev);
> }
>
> -static const struct usb_device_id ccp_devices[] = {
> - { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) },
> - { USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) },
> +static const struct hid_device_id ccp_devices[] = {
> + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_COMMANDERPRO) },
> + { HID_USB_DEVICE(USB_VENDOR_ID_CORSAIR, USB_PRODUCT_ID_CORSAIR_1000D) },
> { }
> };
>
> -static struct usb_driver ccp_driver = {
> +static struct hid_driver ccp_driver = {
> .name = "corsair-cpro",
> + .id_table = ccp_devices,
> .probe = ccp_probe,
> - .disconnect = ccp_disconnect,
> - .id_table = ccp_devices
> + .remove = ccp_remove,
> + .raw_event = ccp_raw_event,
> };
>
> -MODULE_DEVICE_TABLE(usb, ccp_devices);
> +MODULE_DEVICE_TABLE(hid, ccp_devices);
> MODULE_LICENSE("GPL");
>
> -module_usb_driver(ccp_driver);
> +static int __init ccp_init(void)
> +{
> + return hid_register_driver(&ccp_driver);
> +}
> +
> +static void __exit ccp_exit(void)
> +{
> + hid_unregister_driver(&ccp_driver);
> +}
> +
> +/* make sure, it is loaded after hid */
> +late_initcall(ccp_init);
> +module_exit(ccp_exit);
> --
> 2.27.0

\
 
 \ /
  Last update: 2020-07-15 04:36    [W:0.067 / U:1.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site