lkml.org 
[lkml]   [2020]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v5 1/4] arm64: dts: rockchip: Trivial cleanups for RockPI N10
Date
Am Donnerstag, 9. Juli 2020, 12:07:53 CEST schrieb Jagan Teki:
> Radxa dalang carrier boards are used to mount vmarc SoM's
> of rk3399pro and rk3288 to make complete SBC.
>
> So, this patch adds trivial changes to properties.
> - move common properties into radxa dalang carrier dtsi.
> - maintain ascending order for nodes, properties.
> - change the order of dtsi include so-that common properties
> will reflect in main dts.
> - drop unnecessary header includes.

can you please split this patch into bits at these marks?
(1) moving common
(2) sorting
...

It's hard to follow and especially verify.



> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> index 0a516334f15f..9ed5b27d715c 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
> @@ -7,35 +7,12 @@
>
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> -#include <dt-bindings/pwm/pwm.h>
>
> / {
> compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
>
> - clkin_gmac: external-gmac-clock {
> - compatible = "fixed-clock";
> - clock-frequency = <125000000>;
> - clock-output-names = "clkin_gmac";
> - #clock-cells = <0>;
> - };
> -
> - vcc12v_dcin: vcc12v-dcin-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc12v_dcin";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <12000000>;
> - regulator-max-microvolt = <12000000>;
> - };
> -
> - vcc5v0_sys: vcc5v0-sys-regulator {
> - compatible = "regulator-fixed";
> - regulator-name = "vcc5v0_sys";
> - regulator-always-on;
> - regulator-boot-on;
> - regulator-min-microvolt = <5000000>;
> - regulator-max-microvolt = <5000000>;
> - vin-supply = <&vcc12v_dcin>;
> + chosen {
> + stdout-path = "serial2:1500000n8";

isn't chosen more a property of the individual board combination?
So to me this should live in the rk3399pro-rock-pi-n10.dts .
As other board even using the rk3399pro variant may want to use
a different uart for serial output.

Heiko


\
 
 \ /
  Last update: 2020-07-14 21:05    [W:0.063 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site