lkml.org 
[lkml]   [2020]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/6] dt bindings: remoteproc: Add bindings for MT8183 APU
On Mon, Jul 13, 2020 at 03:29:22PM +0200, Alexandre Bailon wrote:
> This adds dt bindings for the APU present in the MT8183.
>
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
> .../bindings/remoteproc/mtk,apu.yaml | 121 ++++++++++++++++++
> 1 file changed, 121 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
>
> diff --git a/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> new file mode 100644
> index 000000000000..1d5fcc135617
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/mtk,apu.yaml
> @@ -0,0 +1,121 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +
> +---
> +$id: "http://devicetree.org/schemas/remoteproc/mtk,apu.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: MT8183 Vision Processor Unit (VPU) devices

APU or VPU?

> +
> +description:
> + This document defines the binding for the APU, a co-processor that could
> + offload the CPU for machine learning and neural network.
> +
> +maintainers:
> + - Alexandre Bailon <abailon@bayLibre.com>
> +
> +properties:
> + compatible:
> + const: mediatek,mt8183-apu
> +
> + reg:
> + description:
> + Address ranges of the APU MMIO.

Don't put generic descriptions for standard properties.

> + maxItems: 1
> +
> + interrupts:
> + description:
> + The interrupt number used to receive the interrupts from the DSP.
> + maxItems: 1
> +
> + clocks:
> + description:
> + "Clocks for co-processor (See: ../clock/clock-bindings.txt)
> + Three clocks are expected for AXI, IPU and JTAG.
> + The JTAG clock seems to be required to run the DSP,
> + even when JTAG is not in use."
> + maxItems: 3

blank line between properties please.

> + clock-names:
> + description:
> + The name of clocks, must be ipu, axi and jtag

That's what the schema says...

> + items:
> + - const: ipu
> + - const: axi
> + - const: jtag
> +
> + iommu:
> + description: "IOMMU (See: ../iommu/iommu.txt)"
> + maxItems: 3
> +
> + memory-region:
> + description: "Reserved memory (See: ../reserved-memory/reserved-memory.txt)"
> + maxItems: 1
> +
> + power-domains:
> + description: "Power domain (see: ../power/power_domain.txt)"
> + maxItems: 1
> +
> + pinctrl:
> + description: pinctrl handles, required to configure pins for JTAG.
> + maxItems: 2
> +
> + pinctrl-names:
> + description:
> + pinctrl name, must be "default", "jtag".
> + "default" must configure the pins when JTAG is disabled.
> + "jtag" must configure the pins for JTAG operations.
> + items:
> + - const: default
> + - const: jtag
> + maxItems: 2

Don't need maxItems.

> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - iommu
> + - memory-region
> + - power-domains

Add:

additionalProperties: false

> +
> +examples:
> + - |
> + #include <dt-bindings/clock/mt8183-clk.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/memory/mt8183-larb-port.h>
> + #include <dt-bindings/power/mt8183-power.h>
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + vpu_ram: vpu_ram@0x60000000 {
> + compatible = "shared-dma-pool";
> + reg = <0 0x60000000 0 0x040000000>;
> + no-map;
> + linux,cma-default;
> + };
> + };
> +
> + vpu0: vpu@0x19100000 {

vpu?

Drop the '0x'

> + compatible = "mediatek,mt8183-apu";
> + reg = <0 0x19180000 0 0x14000>;

The default cell size for examples is 1.

> + reg-names = "mmio";
> + interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_LOW>;
> +
> + iommus = <&iommu M4U_PORT_IMG_IPUO>,
> + <&iommu M4U_PORT_IMG_IPU3O>,
> + <&iommu M4U_PORT_IMG_IPUI>;
> +
> + clocks = <&ipu_core0 CLK_IPU_CORE0_AXI>,
> + <&ipu_core0 CLK_IPU_CORE0_IPU>,
> + <&ipu_core0 CLK_IPU_CORE0_JTAG>;
> +
> + clock-names = "axi", "ipu", "jtag";

Doesn't match the schema which 'make dt_binding_check' will tell you.

> +
> + power-domains = <&scpsys MT8183_POWER_DOMAIN_VPU_CORE0>;
> + memory-region = <&vpu_ram>;
> + };
> +...
> --
> 2.26.2
>

\
 
 \ /
  Last update: 2020-07-14 19:22    [W:0.177 / U:2.504 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site