lkml.org 
[lkml]   [2020]   [Jul]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH v10 02/17] spi: spi-mem: allow specifying a command's extension
Date
On 6/23/20 9:30 PM, Pratyush Yadav wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> In xSPI mode, flashes expect 2-byte opcodes. The second byte is called
> the "command extension". There can be 3 types of extensions in xSPI:
> repeat, invert, and hex. When the extension type is "repeat", the same
> opcode is sent twice. When it is "invert", the second byte is the
> inverse of the opcode. When it is "hex" an additional opcode byte based
> is sent with the command whose value can be anything.
>
> So, make opcode a 16-bit value and add a 'nbytes', similar to how
> multiple address widths are handled.
>
> Some places use sizeof(op->cmd.opcode). Replace them with op->cmd.nbytes
>
> The spi-mxic and spi-zynq-qspi drivers directly use op->cmd.opcode as a
> buffer. Now that opcode is a 2-byte field, this can result in different
> behaviour depending on if the machine is little endian or big endian.
> Extract the opcode in a local 1-byte variable and use that as the buffer
> instead. Both these drivers would reject multi-byte opcodes in their
> supports_op() hook anyway, so we only need to worry about single-byte
> opcodes for now.
>
> The above two changes are put in this commit to keep the series
> bisectable.
>
> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
> ---
> drivers/spi/spi-mem.c | 13 +++++++------
> drivers/spi/spi-mtk-nor.c | 4 ++--
> drivers/spi/spi-mxic.c | 3 ++-
> drivers/spi/spi-zynq-qspi.c | 11 ++++++-----
> include/linux/spi/spi-mem.h | 6 +++++-
> 5 files changed, 22 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/spi/spi-mem.c b/drivers/spi/spi-mem.c
> index 93e255287ab9..ef53290b7d24 100644
> --- a/drivers/spi/spi-mem.c
> +++ b/drivers/spi/spi-mem.c
> @@ -159,6 +159,9 @@ bool spi_mem_default_supports_op(struct spi_mem *mem,
> if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
> return false;
>
> + if (op->cmd.nbytes != 1)
> + return false;

I would put this imediately before:

if (spi_check_buswidth_req(mem, op->cmd.buswidth, true))

to speed up the exit and avoid the rest of the checks that would
become superflous.


> +
> return true;
> }
> EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
> @@ -173,7 +176,7 @@ static bool spi_mem_buswidth_is_valid(u8 buswidth)
>
> static int spi_mem_check_op(const struct spi_mem_op *op)
> {
> - if (!op->cmd.buswidth)
> + if (!op->cmd.buswidth || !op->cmd.nbytes)

we would be more explicit with:
if (!op->cmd.buswidth || !op->cmd.nbytes || op->cmd.nbytes > 2)

With these addressed:

Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>

> return -EINVAL;
>
> if ((op->addr.nbytes && !op->addr.buswidth) ||
> @@ -309,8 +312,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
> return ret;
> }
>
> - tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes +
> - op->dummy.nbytes;
> + tmpbufsize = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
>
> /*
> * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so
> @@ -325,7 +327,7 @@ int spi_mem_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>
> tmpbuf[0] = op->cmd.opcode;
> xfers[xferpos].tx_buf = tmpbuf;
> - xfers[xferpos].len = sizeof(op->cmd.opcode);
> + xfers[xferpos].len = op->cmd.nbytes;
> xfers[xferpos].tx_nbits = op->cmd.buswidth;
> spi_message_add_tail(&xfers[xferpos], &msg);
> xferpos++;
> @@ -427,8 +429,7 @@ int spi_mem_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
> return ctlr->mem_ops->adjust_op_size(mem, op);
>
> if (!ctlr->mem_ops || !ctlr->mem_ops->exec_op) {
> - len = sizeof(op->cmd.opcode) + op->addr.nbytes +
> - op->dummy.nbytes;
> + len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
>
> if (len > spi_max_transfer_size(mem->spi))
> return -EINVAL;
> diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c
> index 7bc302b50396..d5f393871619 100644
> --- a/drivers/spi/spi-mtk-nor.c
> +++ b/drivers/spi/spi-mtk-nor.c
> @@ -195,7 +195,7 @@ static int mtk_nor_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op)
> }
> }
>
> - len = MTK_NOR_PRG_MAX_SIZE - sizeof(op->cmd.opcode) - op->addr.nbytes -
> + len = MTK_NOR_PRG_MAX_SIZE - op->cmd.nbytes - op->addr.nbytes -
> op->dummy.nbytes;
> if (op->data.nbytes > len)
> op->data.nbytes = len;
> @@ -219,7 +219,7 @@ static bool mtk_nor_supports_op(struct spi_mem *mem,
> (op->dummy.buswidth == 0) &&
> (op->data.buswidth == 1);
> }
> - len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
> + len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
> if ((len > MTK_NOR_PRG_MAX_SIZE) ||
> ((op->data.nbytes) && (len == MTK_NOR_PRG_MAX_SIZE)))
> return false;
> diff --git a/drivers/spi/spi-mxic.c b/drivers/spi/spi-mxic.c
> index 69491f3a515d..8c630acb0110 100644
> --- a/drivers/spi/spi-mxic.c
> +++ b/drivers/spi/spi-mxic.c
> @@ -356,6 +356,7 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
> int nio = 1, i, ret;
> u32 ss_ctrl;
> u8 addr[8];
> + u8 opcode = op->cmd.opcode;
>
> ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz);
> if (ret)
> @@ -393,7 +394,7 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
> writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
> mxic->regs + HC_CFG);
>
> - ret = mxic_spi_data_xfer(mxic, &op->cmd.opcode, NULL, 1);
> + ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1);
> if (ret)
> goto out;
>
> diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
> index 17641157354d..bbf3d90561f5 100644
> --- a/drivers/spi/spi-zynq-qspi.c
> +++ b/drivers/spi/spi-zynq-qspi.c
> @@ -527,20 +527,21 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
> struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master);
> int err = 0, i;
> u8 *tmpbuf;
> + u8 opcode = op->cmd.opcode;
>
> dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
> - op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
> + opcode, op->cmd.buswidth, op->addr.buswidth,
> op->dummy.buswidth, op->data.buswidth);
>
> zynq_qspi_chipselect(mem->spi, true);
> zynq_qspi_config_op(xqspi, mem->spi);
>
> - if (op->cmd.opcode) {
> + if (op->cmd.nbytes) {
> reinit_completion(&xqspi->data_completion);
> - xqspi->txbuf = (u8 *)&op->cmd.opcode;
> + xqspi->txbuf = &opcode;
> xqspi->rxbuf = NULL;
> - xqspi->tx_bytes = sizeof(op->cmd.opcode);
> - xqspi->rx_bytes = sizeof(op->cmd.opcode);
> + xqspi->tx_bytes = op->cmd.nbytes;
> + xqspi->rx_bytes = op->cmd.nbytes;
> zynq_qspi_write_op(xqspi, ZYNQ_QSPI_FIFO_DEPTH, true);
> zynq_qspi_write(xqspi, ZYNQ_QSPI_IEN_OFFSET,
> ZYNQ_QSPI_IXR_RXTX_MASK);
> diff --git a/include/linux/spi/spi-mem.h b/include/linux/spi/spi-mem.h
> index e3dcb956bf61..159463cc659c 100644
> --- a/include/linux/spi/spi-mem.h
> +++ b/include/linux/spi/spi-mem.h
> @@ -17,6 +17,7 @@
> { \
> .buswidth = __buswidth, \
> .opcode = __opcode, \
> + .nbytes = 1, \
> }
>
> #define SPI_MEM_OP_ADDR(__nbytes, __val, __buswidth) \
> @@ -69,6 +70,8 @@ enum spi_mem_data_dir {
>
> /**
> * struct spi_mem_op - describes a SPI memory operation
> + * @cmd.nbytes: number of opcode bytes (only 1 or 2 are valid). The opcode is
> + * sent MSB-first.
> * @cmd.buswidth: number of IO lines used to transmit the command
> * @cmd.opcode: operation opcode
> * @cmd.dtr: whether the command opcode should be sent in DTR mode or not
> @@ -94,9 +97,10 @@ enum spi_mem_data_dir {
> */
> struct spi_mem_op {
> struct {
> + u8 nbytes;
> u8 buswidth;
> u8 dtr : 1;
> - u8 opcode;
> + u16 opcode;
> } cmd;
>
> struct {
> --
> 2.27.0
>

\
 
 \ /
  Last update: 2020-07-13 08:17    [W:0.350 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site